What is the difference between magnetic and frictional descent of a raft fishing wheel?

1. The stability is different: the frictional slow drop is more stable than the magnetic slow drop. The magnetic force is not directly connected, and the gentle descent is the smoothest.

2. The working principle is different.

Magnetic slow descent: the structure is usually adjusted by rotating the adjustment knob to adjust the size of the slow descent force, mainly through the principle of thread, the whole structure is rotating and rising and falling, the whole is rough, the opening must be from min to max, the closing must be from the current position to min, the use is very cumbersome. It also takes time to rotate the adjustment knob, so it is not possible to determine the depth and hold time of the ideal exit speed in an effective fishing depth.

Friction slowdown: It's micro-lead fishing. Adjust the small amount of lead (microlead) to the bait until it is lead-free, so that the bait sinks at the same rate as the bait in the water, so that the fish can relax their vigilance, and the probability of catching fish will increase when passing through the fish layer.

The line needs to be more than 60 cm, and the sinking speed is faster than the sinking speed of the lead sinker after the hook is hung on the bait, which means that the line is always in a straight straight state, and you can feel the small signal by hand during the bait sinking process.

3. The production method is different.

Magnetic slow descent: a raft wheel magnetic slow descent device, which is provided with a main body, is provided with a spindle, and the wire wheel is mounted on the main shaft through a bearing, and it is characterized in that, the upper end of the main shaft is fixed with a nut.

The outer side wall of the nut is machined with threads, and the axial direction of the outer side wall of the nut.

The vertical groove is evenly distributed, the nut is screwed on the thread of the nut, the radial processing of the nut has a transparent screw hole, the steel ball and the spring are installed sequentially in the screw hole from the inside to the outside, the ejector wire is screwed in the screw hole to hold the spring tightly, and a strong magnet is embedded on the lower side of the nut.

Friction slow down: in the prior art, the slow descending device is mainly made up of a fixed plate that is provided with a hook at the lower end, a brake guide wheel that is fixed on the fixed plate, a movable guide wheel that is positioned below the brake guide wheel and pivoted with the fixed plate, a brake handle that is connected with the movable guide wheel and a cover plate that is hinged with the fixed plate.

Frictional slow drop is more stable than magnetic slow fall.

Raft fishing. Detailed explanation: Raft fishing is a very popular fishing method, and Japanese anglers mostly use it to row fish at sea. Domestic anglers mainly carry out raft fishing in freshwater aquaculture areas, cage sides, and deep-water areas where boats go to reservoirs.

Raft fishing waters: mainly on the edge of the breeding cage and on the fish row, and you can also pull the rope to fix the boat for raft fishing. Because of long-term feeding under the breeding cage cage and the surrounding area, a relatively fixed fish gathering area is formed, which is the best fishing spot suitable for raft fishing.

Safety matters: Do not occupy the main channel at the fishing spot first, and consider whether it is convenient for the owner to go to the cage to feed the fish, or if there are others walking around, it will cause obstacles to others. Don't lift the net above the cage, it's a fish that is raised, it's rude and can cause the fish to jump out.

Say fly fishing wheel.

I basically make a hair fishing wheel.

Spinning wheels, droplet wheels are turned upside down to make raft fishing wheels

1. The structure is usually adjusted by the rotation adjustment knob to adjust the size of the slow descending force, mainly through the principle of thread, the whole structure is rotating and rising and falling, the whole is rough, the opening must be from min to max, and the closing must be from the current position to min, which is very cumbersome to use.

2. It also takes time to rotate the adjustment knob with the spike, so in the effective fishing depth, there is no big fool to determine the depth and holding time of the ideal line speed.

<> Principle of magnetic descent of raft fishing wheel:

1. The structure is usually adjusted by rotating the adjustment knob to adjust the size of the slow descending force, mainly through the principle of thread, the whole structure is rotating and rising and falling, the whole is rough, the opening must be from min to max, and the closing must be from the current position to min, which is very cumbersome to use.

2. It also takes time to rotate the adjustment button, so it is impossible to determine the depth and holding time of the ideal exit speed in the effective fishing depth.