Why is the xplay6 signal so bad

First of all, such as in some tall buildings, basements, tin houses, remote mountainous areas, parking lots, etc., will affect the mobile phone signal, as well as poor local signal coverage will also lead to poor mobile phone signal, and SIM cards may also lead to poor signal. If the above situation is ruled out or the signal is poor, you can refer to the following methods:

2. You can update the system version to optimize the system to try: click Settings - More Settings - System Upgrade - Check the update immediately, according to the prompts**Upgrade package, click Verify and Install, the phone will restart and automatically enter the upgrade mode.

3. If the above methods still cannot solve the problem of poor mobile phone signal, it is recommended to send the mobile phone to the local after-sales service center to test the specific reason, and the address of the after-sales service center can be found in the settings - more settings - after-sales service options.

The poor mobile phone signal is because the signal will be affected by various factors such as terrain, landform, and high-rise buildings during the propagation process, and if you are in a relatively closed place, the signal will be affected. You can restart your phone, or change the SIM card to a family friend's phone to try again, and see if the signal of other connected users around you is working. If your signal problem cannot be solved, please contact the local customer service for consultation.

In this case, we recommend that you try the following methods first:

1. Turn off and restart the phone to try it;

2. Take out the SIM card and reinsert it or replace it with another SIM card.

3. Use it after changing the network environment and time period, and you can also compare other mobile phones (using the same network) to see if this phenomenon exists.

The design of the mobile phone is flawed, and the Unicom signal is not good.

The reason for the bad signal is that the signal will be affected by various factors such as terrain, landform, and high-rise buildings in the process of propagation

1. Turn the phone on and off again;

2. Swap the SIM card to a family member's or friend's phone and try again;

3. Check whether there is a signal from other Unicom users around;

If the above situation has not been resolved, it is recommended to contact the manual customer service of the place where you belong for processing.

1. Change the network environment.

The mobile phone is in some tall buildings, basements, parking lots, etc., which will affect the signal; If you are in a closed place (e.g., an elevator) or in a remote area, it is easier to disconnect your phone from the outside world. We can try to change places and see if there will be a change in the cell phone signal.

2. Re-register the network.

You can restart your phone to let it re-register for the network.

3. Determine whether the SIM card is valid.

If the SIM card is not installed properly, or the SIM card is damaged, the signal will inevitably be affected. You can remove the SIM card and reinstall it, or try a different SIM card.

Fourth, the operator's network problems.

If the signal of the mobile phone suddenly deteriorates during a certain period of time, it may be a problem with the operator's network.

It is recommended to compare mobile phones with the same carrier SIM card in the same environment to see if there is the same situation, and you can try it at another time period.

Bad hotspot signal:

1. Try to get the two mobile phones closer together;

2. If the mobile phone is wearing a protective case, please take off the protective case;

3. Enter the mobile phone settings - system upgrade detection and update the mobile phone system.

I don't want to regret buying this mobile phone, heating, Caton, slow charging, fast power consumption, at first I looked at the curved screen, or what flag aircraft, I bought it. Really the most rubbish phone I've ever used.

The main disadvantage of vivo xplay is the battery life, its battery life is not very good, and then the signal is relatively weak.

It is not recommended to buy spicy chicken to death, and the application is stuck and the network speed is poor.

vivo xplay6Both processing networks are automatically disconnectedofResolvedMethod:

OneThe data network is automatically disconnectedofResolvedMethod:

1. Press and hold the power button of the mobile phone to selectRestart your phoneReuse.

2. Confirm whether the network environment of the mobile phone is good, if the network is poor, you canReplace to a better environmentUse.

3. The mobile phone system version is not the latest, enter the mobile phone settings - system upgrade detection version, willUpdate your phone to the latest versionUse.

Steps:

1) Click Settings on the standby desktop.

2) System upgrade.

3) Update your phone to the latest version.

4. WillReset all settings on your phoneorErase all data, go to phone settings - more settings - factory reset - reset all settings to erase all data (restoring all settings will not erase the data in the phone, clear all data, please back up important data first).

Steps:

1) Click Settings on the standby desktop.

3. Restore factory settings.

4. Choose to reset all settings or erase all data.

IIThe wifi network is automatically disconnectedofResolvedMethod:

1. Enter the mobile phone settings - WLAN interface - (left menu key) - advanced settings interface, willWLAN hibernation policy modifiedfor".Never sleep

Steps:

1) Click Settings on the standby desktop.

2、wlan

3. Advanced settings.

4. WLAN sleep policy.

5. Select ".Never sleep

2. Confirm whether the wifi signal is good, tooConnect to other Wi-Fi networksReuse.

It is recommended to try the following methods:

1. Charging does not play with the phone, and playing the mobile phone does not charge.

When charging, the battery will emit a certain amount of heat because of the conversion of electric energy, if you play with the mobile phone while charging, the mobile phone CPU is in a high-load operation state, which will increase the heat, and while input, while output, it is not good for the battery.

Second, let the mobile phone rest for a while and regret it, and give the mobile phone a vacation.

Mobile phones are the same as computers, they will heat up after a long period of use, and computers also have special cooling fans, and our mobile phones can only rely on you to give it a vacation.

3. Avoid using or charging in a high-temperature environment.

If the phone is exposed to high temperatures for a long time or used in a high temperature environment, the phone will heat up significantly. In addition, when charging, do not put your phone on the quilt or in a bag or other places where heat is not easily dissipated. In a closed environment, it will also make the mobile phone heat aggravated.

Fourth, clean up the programs and software running in the background in a timely manner.

If some programs and applications in the background of the mobile phone are not closed in time, the mobile phone will heat up and quickly consume the mobile phone's battery. So to use one-click acceleration in time, Woodson cleans up background programs.

5. Use your mobile phone in an environment with a good signal.

When the mobile phone is in a poor signal environment, in order to ensure the normal communication of the mobile phone, the transmission power of the mobile phone will increase, so the heating of the mobile phone will be more obvious, it is recommended that you operate the mobile phone in an area with a better signal or feedback the signal problem to the network operator.

If the SIM signal of the mobile phone is not good, you can try the following methods:

1. Turn off the phone and restart it to try it.

Second, change the environment to see if it will be better.

3. Use a friend's SIM card to see if it's the same.

Fourth, upgrade the phone to the latest version to try it, you can enter the settings - system upgrade - check the update immediately, according to the prompts ** upgrade package, click to verify and install, the phone will restart and automatically enter the upgrade mode.

If it is in some tall buildings, basements, parking lots, remote mountainous areas and other environments, it will affect the mobile phone signal.

If you are connected to a WiFi network, it is recommended to try the following methods:

1. Go to Settings - WLAN - Click the Menu key - Advanced Settings - Select Never Sleep.

2. Close to the router and connect to WiFi.

3. Restart the router and connect to the WiFi immediately, or restore the router to factory settings to re-encrypt the WiFi.

4. Try to change the wifi connection in other places.

If you are connected to a data network, you can try the following methods:

1. Please call the SIM card operator first to confirm whether the mobile phone is in arrears.

2. Confirm whether the switch of the data network is turned on.

3. Restart your phone and try to see if you can access the Internet.

4. Enter i Butler - Traffic Monitoring - Network Management - Turn on the networking permission of the software.

5. It is recommended to change the network environment and time period, or change to another SIM card and try again.