HOW TO MAKE A FLIPPAGE ANIMATION WITH FLASH

The steps of the flip animation production tutorial are as follows:

How to make a book flip animation in ppt:

Make two pages.

1. Click the small triangle on the right side of "AutoShape", select the "Chamfer" graphic under "Basic Shape", and draw a page-like graphic in PowerPoint, preferably less than half the width of the document.

2. Press and hold the disc on the health plate"Ctrl" key, pull (copy and paste) an identical shape, place it side by side on the left side of the first shape, then click on the small triangle to the right of the "Drawing" and select "Rotate or Flip" - Flip Horizontally.

3. Select the graphic on the right, left-click twice (double-click) to select "Color and Line" - the small black triangle of the color --- fill effect - ** - select ** - insert - OK --- OK, and use the same method to insert ** in the left shape.

Add animations. 1. Select the graphic on the right, add a custom animation (click "Slideshow" - Custom Animation), and in the "Add Effect" in the pop-up custom animation panel, select "Exit" - Cascade effect. Direction: Select "To Left".

2Select the graphic on the left and add an animation. In Add Effect, select "Enter" - Stretch. Start selects After, and Direction selects From Right.

Then select the shape on the left, and then give it an effect "Enter--- gradient," Start and select "Before".

3. At this time, you can show the slides to test the effect and see if there is the effect of flipping the book. If that's right, let's start making a multi-page flipbook effect.

Make a multi-page flipbook effect.

Select the ** on the right first. Copy, paste one. Double-click on this one, select "Color and Line" - the small black triangle of the color --- fill effect - ** - select - insert - OK --- OK. Right-click again and select "Stack Order--- to place on the bottom layer.

Then, select ** on the left. Copy and paste one, double-click this one, and select "Color and Line" - the small black triangle of the color --- the filling effect - ** - Select - Insert - OK --- OK.

Then select ** on the right. Copy, paste one. Double-click on this one, select "Color and Line" - the small black triangle of the color --- fill effect - ** - select - insert - OK --- OK. Hit again and select "Stack Order--- to place on top.

4 Then, select ** on the left. Copy and paste one, double-click this one, and select "Color and Line" - the small black triangle of the color --- the filling effect - ** - Select - Insert - OK --- OK.

And so on and so forth, until you finish the ** you want to insert. )

Flip Animation Tutorial:

1. Open the PPT software, click Insert Menu Bar > click the ** option in the image text box > select this device in the pop-up tab.

2. Select the one that needs to be inserted in the pop-up insert** text box - > click OK to successfully insert**.

3. Create a new fluttering sparrow to make multiple slides, click the start menu bar - > select New Slide in the slide text box.

4. Insert ** in the slideshow in turn, click Insert menu bar - > click the ** option in the image text box - > Insert ** in the slide.

5. Select the transition effect, select the slide you need to operate—> click the switch menu bar—> select the push switch effect in this slide, and you can select the appropriate transition effect according to your needs.

6. Change the animation duration, change the duration to 2 seconds in the timing text box.

The concept of animation is different from animation in the general sense, animation is a comprehensive art, and it is an artistic expression that integrates many artistic categories such as painting, film, digital, photography, and literature.

It first originated in Britain in the first half of the 19th century and flourished in the United States, and Chinese animation originated in the 20s of the 20th century. Animation is a young art, it is the only art with a definite date of birth, and Émile Reynaud is also known as the "father of animation" by showing an optical film to the audience for the first time at the famous Grévin wax museum in Paris.

The tutorial for making a flip animation is as follows:1. Open the PPT software, click Insert Menu Bar > click the ** option in the image text box > select this device in the pop-up tab.

2. Select the one that needs to be inserted in the pop-up insert** text box - > click OK to successfully insert**.

3. Click the start menu bar and select New Slide in the slide text box.

4. Click Insert menu bar, click the ** option in the image text box, and insert ** in the slideshow.

5. Select the slide that needs to be operated, click the switch menu bar, and select the push in switch to this slide, and you can choose the appropriate switch effect according to your needs.

6. Change the duration to 2 seconds in the timing text box.

Material Tool: FLSH

1. First of all, we open the flash software, enter the operation interface of flash2, after opening flash, we find the rectangle tool in the toolbox 3, rotate the rectangle tool, we draw a blue rectangle on the stage4, select the rectangle to draw, we find the window option in the menu, click on the option to find the animation preset option in its child menu, 5, click on the animation preset option, the animation preset panel appears on the right side, and then we find the animation preset folder in the panel.

6. Click on the Animation Presets folder in which we find the Rotation Option7. Select the Rotation OptionWe find the Apply option in the Animation Presets, click on the option and press Ctrl+Enter, at this time our rectangle begins to move.

The radius is converted into a component, and then use the arbitrary deformation tool to adjust the center point of the component to the center of the circle, add a keyframe to a later frame, create a tween, there is a rotation in the motion tween properties, choose forward or reverse time, and turn it once. This will make the radius rotate, but because the first frame is the same as the last frame, it will get stuck, and you need to convert the penultimate frame to a keyframe, and then delete the last frame.

One layer of circles, one layer of radius, one layer of radius, the one layer of radius, aligns the center point to the center of the circle, and then animates the tweens and sets the adjustment keyframes.

1. First of all, we open the flash software, enter the operation interface of flash2, after opening flash, we find the rectangle tool in the toolbox 3, rotate the rectangle tool, we draw a blue rectangle on the stage4, select the rectangle to draw, we find the window option in the menu, click on the option to find the animation preset option in its child menu, 5, click on the animation preset option, the animation preset panel appears on the right side, and then we find the animation preset folder in the panel.

6. Click on the animation preset folder in which we find the rotation option, 7. Select the rotation option, we find the application option in the animation preset, click on the option and then press the Ctrl+Enter key, at this time our rectangle begins to rotate

Page turning effects.

1. Create a new graphic element one, import a ** to the stage in the component, and set the **size to 210*270. In the same way, the ** to be turned separately creates a new graphic element, with a size of 210*270.

2. Create a new symbol, the type is movie clip, and the name is "page turning effect". Drag the graphic symbol onto the Stage at frame 1 of the layer, and use the Arbitrary Morph tool to move the center point left to the control point in the middle of the left, aligned relative to the left of the stage, and centered vertically. Insert a keyframe at 30 frames, open the Warp panel, constrain the checkbox, tilt vertically -60 degrees, and press Enter.

Select the first frame, right-click and select Create Tween.

3. Create a new layer 2, insert keyframes at frame 31, drag Graphic Element 2 from the library to the stage, use the Arbitrary Shape tool to move the center point right to the control point in the middle of the right, align it relative to the right of the stage, and center it vertically. Insert a keyframe at 60 frames, select 31 frames, open the Morph panel, and tilt the constrained checkbox vertically by 60 degrees, and press Enter. Right-click at frame 31 and select Create Tween to insert frame at frame 120.

4. Create a new layer 3, drag layer 3 to the bottom of layer 1, select the first frame, drag the graphic element 3 from the library to the stage, use any deformation tool to move the center point left to the left control point, align it relative to the left of the stage, and center it vertically. Insert keyframes in each frame, select 90 frames, open the Warp panel, constrain the checkbox, tilt vertically -60 degrees, and press Enter. Select 61 frames, right-click and select Create Tween.

5. Create a new layer 4, drag component 4 from the library to the stage, use the arbitrary deformation tool to move the center point right to the control point in the middle of the right, align it relative to the right of the stage, and center it vertically. Insert keyframes at 120 frames, select 91 frames, open the Warp panel, constrain the checkbox, and tilt vertically 60 degrees.

It's a pity that my rank can't be inserted **)

I do it with a mask effect and it is very good soon. Take care to convert ** into the original.

It's really troublesome for beginners to do this, and it's often half the effort. Why don't you go online and search for software to make photo albums.

There are a lot of photo album software on the Internet, and this kind of software has a page-turning effect, and it has a lot of special effects, which is much better than watching the tutorial yourself.

If you want me to see, you don't do it, you just search for a page-turning effect on the Internet, and then you can change it yourself and use it.

Let's make a flipbook effect with 8 sides of paper, which are named separately: "Move", "Painting", "Exhibition", "Stage", "Huan", "Welcome", "You"""!

1. First of all, create 8 components, draw 8 pages respectively, and name them as above.

2. After building 8 elements, create a layer in the main scene, name it "Motion", and drag the element "Motion" to the main screen. Create another layer, name it "Exhibition", drag the "Exhibition" layer below the "Motion" layer, and drag the component "Exhibition" from the library to the main field. Move the art symbol so that it overlaps the moving component, and then move the center of each of the two components to the far left using the Edit Center of Conversion in the Modify menu.

3. Insert a keyframe at the 30th frame of the "Motion" layer, select the "Motion" page at this frame, press the "Rotate" button to pull its rightmost edge up, then select the "Expand" button, pull its rightmost edge to the left until it is condensed into a thin line, and then open the frame panel at the first frame of this layer, select the motion tween animation as movement, press the test video to see the effect, we can see the "Motion" flip and "Spread" look.

4. Click the left mouse button on the "Motion" layer, insert a new layer, and name it "Painting", then press F6 at frame 31 to insert a keyframe, then take the "Painting" page out of the library, and then use the edit center of the conversion in the modification menu to move the center of this component to the far right, note the rightmost side, and then put the "Painting" next to the left side of the "Exhibition", and then press the F6 key at the 60th frame of this layer, insert a keyframe, go back to the 31st frame, and then use the "Rotate" and "Stretch" tools to put the " Draw "make a thin line like "move", then open the frame panel at the first frame of this layer, and select the tween animation as movement, that is, the flipbook effect of the "drawing" page is generated.

5. Let's go back to the "Exhibition" layer and press the F6 key at the 61st frame to insert a keyframe, and start to make a page-turning animation like "Motion" from this frame (the specific method is the same as making the "Motion" page animation), and then build a new layer on this layer, named "Huan", and drag the "Huan" layer below the "Exhibition" layer, so that when the "Exhibition" turns the page, "Huan" will be revealed. Use the same method to animate the other pages.

6. Finally, we put "you" and "! "You can also make a flipbook animation according to the above method, but you need to pay attention to the start and end points of the keyframes of each layer. This animation is not difficult to do, and those who are interested may wish to try it.

Draw an open book first, create a new layer on it, and make a keyframe on the top page of the right side of the book (e.g. in the Frame 30 31 45 60 on the import upload, press Make a keyframe (don't make a component) and use shape to animate them.