How to use the NFC function of mate9 to recharge the bus card

NFC (Near Field Communication) is a technology that enables fast, convenient and secure payments. It can also be transmitted instantly, and you can share your own **, applications, etc. with friends.

There are three main modes of operation for NFC:

The card emulation mode simulates the NFC-enabled device into a smart card to realize functions such as device payment and access control.

The read-write mode supports reading and writing NFC tags, such as topping up a bus card.

The peer-to-peer mode supports the interaction between two NFC devices and enables data transfer between the devices.

1. Transfer files via NFC.

First, you need to turn on the NFC switch on the NFC settings page, and turn on the Huawei Beam switch (if there is a read/write point-to-point switch, please also enable it).

Open a single contact in the gallery or a single contact detail in Contacts. Then place the NFC antennas of the two phones close to each other.

When the phone detects that another NFC phone is approaching, the current** or contact interface will zoom out and show touch send. At this point, tap the scaled down interface to transfer to another phone.

When the transfer starts, you can separate the two phones that are close together.

2. Pay through NFC function.

Open NFC and select the NFC-enabled SIM card under the NFC Security Chip.

Under the default payment application, select the corresponding carrier wallet application, and follow the prompts to bind the card and deposit.

When the payment amount is displayed on a terminal such as a bus card reader or POS machine that supports NFC, you can easily make a payment by touching the device to the terminal sensing area with the touch payment logo.

This mode supports swiping the card when the computer is turned off, please turn on the NFC switch before the shutdown in order to use the payment function normally after the shutdown.

3. Recharge the physical product through NFC.

Locate the NFC sensing area of your phone.

Place the bus card in the NFC sensor area on the back of your phone.

Recharge the physical object through NFC1 to ensure that the NFC function is turned on: Please enter "Settings" NFC to ensure that the switch is turned on. 2. Corresponding applications, such as Alipay, Yipay, etc.

3. Find the sensing area of the NFC of the mobile phone. 4. Place the bus card in the NFC induction area on the back of the mobile phone. 5. Identifiable apps in the pop-up.

The specific steps are as follows:

<>3. Click Install on the page, as shown in the figure below.

4. After returning to the main page, click on the cong friend to open it to use the infiltration locust.

Huawei Mate9 supports NFC function.

The steps to open a bus card are as follows:

Open HUAWEI Wallet.

2.Log in to your HUAWEI ID.

3.Tap swipe, NFC will automatically turn on and automatically set the corresponding security chip.

4.Click Add transit card.

5.Select the region where you want to activate the region.

6.Follow the steps to complete the recharge step by step to successfully open the card.

The steps to recharge the bus card are as follows:

3.Place the bus card in the NFC sensing area on the back of the phone, and select the corresponding application in the pop-up recognizable application (the corresponding application of the bus card is different in different cities).

4.Follow the prompts step by step and successfully deposit the amount.

Step 1: Turn on the NFC function on your phone.

Step 2: When the QQ is running on the mobile phone, post the Shenzhen Pass in the NFC induction area and select "QQ".

Note: Since the HUAWEI Mate8 NFC sensor area is near the camera, please place the bus card this time.

Step 3: Select the deposit amount and pay.

Step 4: After the payment is successful, the Shenzhen Pass will be posted in the NFC induction area, and it is important to write the card: after the payment is successful, you must post the card and write the card again, otherwise the money paid will not be able to go to the Shenzhen Pass.

When writing a card, please keep the card close to the NFC sensor area of your phone!

Step 5: Deposit successfully.

Mate8's NFC is on top of the camera, put the card in this position and pinch it a little harder, and when the balance is displayed, it means that it can be recharged.

The specific steps to use the Huawei Mate9 NFC function are as follows:

1. Open the Huawei Mate9 phone that needs to turn on the NFC function and enter the phone settings page.

2. Scroll down to find the "WLAN" option and turn it on.

3. After opening, find the "NFC" option and open it.

The Huawei Mate9 NFC function can be used as follows:

1. Turn on your Huawei Mate9 phone and turn on the settings function.

2. Then find the Huawei Mate9 phone "Wireless & Network", and find the NFC option.

3. And find the NFC option for Huawei Mate9 mobile phone.

4. Turn on the "NFC" switch option on Huawei Mate9 mobile phone.

HUAWEI MATE9The NFC function has been turned on by default,When you use it, you only need to bring the NFC signal of the mobile phone close to the bus card machine and other devices。

If it is not enabled by default, you can enable it by following the following steps:

1. Mobile phone - settings;

4. Check [NFC] to turn on the NFC function.

What is NFC?

NFC full name Near-Field Communication translates to Chinese called short-field wireless communication technology, which is jointly developed by Philips, Sony and Nokia, and evolved from contactless radio frequency identification, which can exchange information within a few centimeters. NFC provides a simple, touch-based solution that allows consumers to exchange information and access content and services simply and intuitively.

What are the modes of NFC?

There are three main modes of NFC:

1.Read-write mode. The read-write mode, as the name suggests, can realize the function of reading and writing cards;

2.Peer-to-peer mode. It is similar to the function of short-distance wireless communication such as Bluetooth and infrared, and can transmit files such as ** through direct contact with the mobile phone.

3.Card mode. This is advanced, you can turn your mobile phone into a bus card or bank card, and others will swipe your mobile phone if you swipe the card, think about it is much taller!

What are the functions of NFC?

According to these modes that NFC can achieve, the app can achieve many functions on mobile phones:

1.Swipe the bus card;

2.mobile payments;

3.file transfer;

4.Other cool features, such as swiping access control, swiping campus card, etc.

Go to HUAWEI Wallet.

Find the Huawei Wallet on the Mate 9 desktop and click to enter.

Log in to your HUAWEI ID.

In the dialog box that pops up, enter your HUAWEI ID and password. If you do not have a HUAWEI ID and password, please complete the registration first.

Add a transit card.

Tap to swipe NFC and it will automatically turn on and automatically set the corresponding security chip. Click Add Bus Card, select the corresponding opening area, learn about the relevant policies and choose to accept.

Open and top up your card.

Select the recharge amount, such as 50 RMB, click Confirm to activate, enable HUAWEI Pay, and follow the step-by-step instructions (add a new bank card and complete the recharge) to open the card.

Swipe your card in the car. If you've done all of the above, you'll be able to travel without your transit card. Please pay attention to the location of the card when using it.

After the NFC switch is turned on, the front and back of the bank card sticker mobile phone are all beautiful reactions, and the previous note3 sticker on the back is good.