What to do if your Breitling watch is not on time

Five common reasons for watch time error and watch time inaccuracy:

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.

5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.

1. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise of the automatic watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. The watch is magnetized: If the hairspring of the mechanical watch is magnetized, the watch will not be accurate.

3. Need for maintenance: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, and it needs to be sent to the designated maintenance point for maintenance services.

4. Hit or impacted: The watch is very precise, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

5. In addition to the above common situations, the influence of some ambient temperature and the wearer's usage habits may cause an increase in the timing error. But you don't need to worry, please send the watch to the designated repair point for professional inspection and adjustment, and the watch can be restored to the normal error range.

The above 5 situations are usually the reasons that may cause the watch to have a time error, once the watch has a time error, we must find the reason, so as to find the corresponding solution, to avoid other reasons can not be solved in time and cause the watch to appear more serious.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

The inaccuracy of the watch may be caused by the following reasons: the watch is magnetized: there is a part in the watch called the hairspring, which is most afraid of the magnetic field, and the watch will be magnetized after it is close to the magnet.

When the hairspring is magnetized, the hairspring is bonded to each other, which can improve the accuracy of the image watch at least and stop at worst. After the watch balance spring is magnetized, it is necessary to find a watchmaker to demagnetize it with a degaussing instrument before the watch can return to normal.

Lack of maintenance: every 2-3 years, every 4-5 years for the watch. Watch maintenance requires the movement to be completely disassembled, cleaned, oiled, reassembled, adjusted, and functionally checked; Repair or replace any worn or malfunctioning movement components.

If the watch lacks maintenance, it will cause the parts to wear out, the sludge will dry up, affect the normal running time of the watch, and make the watch appear fast and slow. Regular maintenance of the whole machine can effectively prevent the occurrence of various failures of the watch.

Summary. 1.Lack of power.

Lack of power is the biggest reason why Breitling watches go and stop. In the case of a mechanical watch, insufficient power means that the watch is not winding enough, resulting in insufficient kinetic energy. Automatic watches, in particular, require the wearer's arm to move at a sufficient level and for a sufficient amount of time.

If you wind it manually, it is because you forgot to wind it manually, which leads to a lack of ability. Therefore, as long as you increase the amount of activity and wind it in time, you can solve this problem.

Why doesn't the second hand of a Breitling watch move?

2.Gear component failure.

There are delicate parts and gears inside the watch, and their normal operation is related to whether the watch runs normally. If you accidentally bump or drop the watch, it will lead to problems such as partial wheels, center wheel failures, and wheel train failures, and the second hand will not go. Such problems are usually not easy to detect, and the watch needs to be disassembled and carefully inspected and tested to find out the problem and solve the problem.

Breitling's watch adjusts the date and the second hand doesn't go.

1.Lack of powerLack of power is the biggest reason why Breitling watches go to a stop. In the case of a mechanical watch, insufficient power means that the watch is not winding enough, resulting in insufficient kinetic energy.

Automatic watches, in particular, require the wearer's arm to move at a sufficient level and for a sufficient amount of time. If you wind it manually, it is because you forgot to wind it manually, which leads to a lack of ability. Therefore, as long as you increase the amount of activity and wind it in time, you can solve this problem.

Why doesn't the second hand of a Breitling watch move? 2.Gear parts failureThere are delicate parts and gears inside the watch, and their normal operation is related to whether the watch is running normally.

If you don't knock or let the watch go, it will lead to problems such as partial wheels, center wheel failures, and wheel train failures, and the second hand will not go. Such problems are usually not easy to find, and the watch needs to be disassembled and carefully inspected and tested in order to find out the problem and solve the problem.

3.Lack of maintenance may not be known to many people, watches also need maintenance, especially mechanical watches. The mechanical Nazen watch should be professionally maintained every 2 to about 3 years after the completion of the socks.

Because if it is not maintained for a long time, dust accumulates and the movement dries up, which will seriously affect the movement of the second hand. To sum up, in the event that the second hand of a Breitling watch does not move, the wearer must first determine whether it is within the scope of the above reasons, and if so, prescribe the right medicine and solve it in time. If not, it is advisable to seek the help of a Breitling Professional Maintenance Center.

Please give a thumbs up

Summary. Hello, glad to answer for you. Pro, the cause of Breitling watches does not go to failure according to the structure of mechanical watches is mainly divided into two aspects:

Failure of the kinetic and transmission systems of a mechanical watch is a failure of the clock's barrel or winding system, resulting in the watch not having enough power to drive the entire system. This caused the Breitling watch to stop. In addition, the failure of the gears of the watch transmission system will also cause the watch to stop.

For example, the teeth are jammed, or the gears cannot be meshed. These are the main reasons for the watch to stop. The solution to the Breitling watch not going away:

Most of the above situations are caused by the lack of maintenance of the watch, as long as the watch movement parts are re-oiled once. Regular maintenance of the watch is a problem that many watch friends will ignore, which will invisibly damage the service life of the watch, so it is recommended that you must not forget to maintain the watch in use.

Hello, glad to answer for you. According to the structure of the mechanical watch, it is mainly divided into two aspects: the failure of the kinetic energy system and the transmission system of the mechanical watch, and the failure of the power system is the failure of the barrel or winding system of the watch, resulting in the watch not having enough power to drive the operation of the whole system.

This caused the Breitling watch to stop. In addition, the failure of the gears of the watch transmission system will also cause the watch to stop. For example, the teeth are jammed, or the gears cannot be meshed.

These are the main reasons for the watch to stop. The solution to the Breitling Dousen watch is not leaving: Most of the above situations are caused by the lack of maintenance of the watch, as long as the watch movement parts are re-oiled once.

Regular maintenance of the watch is a problem that many watch friends will ignore, which will invisibly damage the service life of the watch, so it is recommended that you must not forget to maintain the watch in use.

It's the outside diving dial, not the watch not leaving.

Oh, I understand, then you have to take it to the after-sales side to deal with it, otherwise the dial will rust, causing the watch not to go.

1. How to adjust the mechanical watch:

1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards in 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

3 pull lightly, and it is 1 gear to screw up to adjust the day, and to screw down to adjust the calendar.

4 in the pull, is 2 gears can adjust the time.

Second, how to adjust the quartz watch:

1 For a calendar watch, when the seconds run to 12 o'clock, pull out the stem and rotate clockwise to adjust the time. If there are no seconds, you can adjust the minute hand to the first two minutes of the time you want to adjust the time, and then push it back to the shank after adjusting the time.

2 For watches with a calendar, pull out the handle a little, you can adjust the day clockwise, adjust the date counterclockwise, pull the handle to the outermost, you can adjust the time, the specific operation is the same as the watch without a calendar.

Generally speaking, each style of watch has a different movement, and there are different debugging methods for different movements, Breitling watches are international famous watches, and there is no movement model or physical object, which is really difficult to answer (personal opinion, for reference only).

Mechanical watch date adjustment method:

1: The innermost upspin is the upper spring, the downspin is neutral, and some of the upper and lower spins are neutral, which completely depends on the rotor to work.

2: Pull out a gear, the top spin is to adjust the date, and the bottom spin is to adjust the day.

3: Some are upspin to adjust the date, downspin is neutral, at this time must be clockwise 24 hours to adjust the day of the week, and then adjust the date after the week is adjusted. (The day of the week will be normal after adjustment, because the day of the week is continuous, and the watch must have a dial date because the calendar has the 30th, 31st, and even February has only 28 days).

5: Day-calendar jumping, due to the different frames, it is divided into two kinds of fast and slow, the first is completed within 5 minutes, and the second is completed within 3 hours.

6: Avoid stripping the calendar between 9 pm and 4 pm, because the night is the time period when the calendar system is running, and manual adjustment is easy to cause damage to parts.

7: It is recommended to send it to the brand after-sales service or regular maintenance service center for testing and maintenance.

If the watch needs to be repaired or maintained, or other needs, it is best to go to after-sales, which not only has a more professional technician and better service, but also its instruments will be more precise. ** It will not be reported like other places, there are standards. The after-sales service is on the seventh floor of Tower A on the side of Wanling Hui.

If the back cover is opened in a non-designated place, it will not be eligible for the warranty.

Hello, glad to answer for you.

The main reasons why the watch does not go are the misalignment of the core gear, the magnetism of the watch, bumps, and the long shelving time, and the oil sludge is dry. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

Take a look at the picture above. What features of the watch?

There are many reasons why a mechanical watch does not go or goes slowly, in addition to the lack of power, bumping or falling will not only make the watch slow or not go but also damage the internal movement of the watch; Or the watch has not been cleaned in time due to water ingress, resulting in corrosion of parts in the future and rust and stopping. If the watch has the above situation, be sure to go to the watch service center for inspection and repair in time to avoid irreparable losses.

It is recommended to choose a regular and professional maintenance point, so as not to cause losses to your watch, and one point is also the most important, the cost of different models of the same watch is also different, it is recommended to play ** detailed consultation.