The phone is flooded, the screen is still on, but the screen becomes a snowflake screen, what s goin

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Regarding water ingress, I still recommend preparing a set of screwdrivers for iPhone users just in case, the first thing after the machine gets water is that the battery power must be disconnected! Regardless of whether you turn off the computer or not, when there is water on the motherboard, the biggest problem is not whether the water is clean or dirty, nor is it corrosion, but the electrolysis mechanism of copper that I learned in junior high school physics (when the copper-clad circuit board has an electric current in the liquid, especially in the water, it will be electrolyzed, produce a conductive green electrolyte and "melt" the line) shutdown will also produce current! Therefore, when the water is ingress, please find a professional to turn on the machine for power off and repair it as soon as possible, so that there is a great chance of resurrection, but sometimes you can't find a professional outside business hours, so you can only use a spare tool to open the machine and disconnect the battery first!

Another point of attention is that if it is not all in the water, pay attention to the attitude of entering the water after fishing to prevent the liquid in the machine from flowing everywhere!

Summary. 1. If the mobile phone accidentally gets into the water, you can't shake the mobile phone vigorously after the water enters, and shaking it violently at this time will cause the moisture to spread inside the mobile phone.

What should I do if the screen of my mobile phone gets into the water and becomes flowery?

Hello, the following answers to your questions:

After the mobile phone is flooded, the screen is blurred, and the specific repair methods are as follows:

1. If the mobile phone accidentally gets into the water, you can't shake the mobile phone vigorously after the water enters, and shaking it violently at this time will cause the moisture to spread inside the mobile phone.

2. The mobile phone should be turned off immediately after entering the water, and in the case of water ingress, the current is easy to form a vortex when the current is kept on, resulting in a short circuit and a blurred screen of the mobile phone.

3. After shutting down, immediately take out the SIM card and SD card. to protect from moisture damage.

4. Place the mobile phone in the sun, or a place with temperature, and wait for the moisture inside the mobile phone to dry after a few hours. Remember not to use a hair dryer to dry it, to avoid liquid blowing into the inside of the phone and high temperature damage to the parts of the phone, etc.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

2.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Boarding service. Make an appointment for service.

Customer Service Center.

1. How to enter the water, it is necessary to judge the approximate amount of water.

If you get a little bit into it, turn it off first, if you can't remove the battery, if you have a fan (note that it's not a hair dryer) blow it. If you are blowing hair, the hair dryer is half a meter to a meter away. Don't blow it more than the distance to burn the motherboard.

If you don't understand, don't use this step to avoid burning the motherboard).

It's okay if there is not much water, find a ventilated, dry place and put it for a day. Don't turn it on.

2. If there is a lot of water, shut it down immediately. Go to a repair shop to repair it, so that it is not easy to burn out the motherboard and reduce losses.

Hello, I have seen your question and is sending a text, please be patient!

Hello, this is the fault of the screen after the mobile phone enters the water, after the water should be used to absorb the remaining water with a paper towel or towel as soon as possible, and then give the mobile phone to the ventilation, if the mobile phone is still turned on, you must first turn off the mobile phone and then take out the mobile phone card, and then the local mobile phone after-sales service center. If you feel that I have been helpful to you, please give me a thumbs up and I will be happy to help you.

Hello, if it doesn't affect the use of the mobile phone, you can also ignore it, because the current mobile phone is very safe, my mobile phone was the same as you last time, but it doesn't affect the use of me, I don't care, now the water spot is not very obvious but it is still visible, but the impact is not big.

Don't turn it on and turn it off quickly, then dry it, take a hair dryer to dry it, and send it to the repair shop for testing.

It's okay to change the inner screen of your phone.

Summary. Hello! The mobile phone is flooded, the screen is still on, but the screen becomes a snowflake screen, the cause analysis, the mobile phone screen caused by water ingress, for the water inlet machine, the first step is to clean up, and then power on to find the problem after the cleaning is completed.

First, the problem of wiring First of all, we must know that the mobile phone screen has three layers, the first layer is the outer screen, that is, the tempered glass layer, the second layer is the LCD screen + touch function layer, and the innermost layer is the backlight layer. The image displayed on the screen is done by receiving the signal through the LCD screen cable, and then with the inner screen emitter. When the mobile phone screen is blurred, it is generally caused by broken wires or short circuits.

However, the cable is welded together with the screen at high temperature, and professional maintenance equipment is required to re-press the row when it is replaced, so the general ordinary repair shop cannot replace the cable separately, and can only replace the screen.

The phone is flooded, the screen is still on, but the screen becomes a snowflake screen, what's going on

Hello! The mobile phone is flooded, the screen is still on, but the screen becomes a snowflake screen, the cause analysis, the mobile phone screen caused by water ingress, for the water inlet machine, the first step is to clean up, and then power on to find the problem after the cleaning is completed. First, the problem of wiring First of all, we must know that the mobile phone screen has three layers, the first layer is the outer screen, that is, the tempered glass layer, the second layer is the LCD screen + touch function layer, and the innermost layer is the backlight layer.

The image displayed on the screen is done by receiving the signal through the LCD screen cable, and then with the inner screen emitter. When the mobile phone screen is blurred, it is generally caused by broken wires or short circuits. However, the cable is welded together with the screen at high temperature, and it needs to be re-pressed by professional Weiqian repair equipment when it is replaced, so the general ordinary repair shop cannot replace the cable separately, and can only replace the screen.

Second, the screen problem The mobile phone has been flooded for too long, resulting in serious damage to the LCD screen, this is a good way to have no lead, only the screen assembly can be replaced, and the maintenance will be relatively high. Like Huawei Mate40 Pro, the official screen replacement price is as high as 2479 yuan. 3. Motherboard problemIf the problem of the mobile phone screen cannot be solved after replacing the screen, then the problem lies with the motherboard.

Water ingress is easy to corrode the motherboard, focus on checking the water ingress area, CPU logic processing transmission, screen display of the work bar to be cautious and shouting parts are normal, display circuit related components, display wide field sockets, display chips, board lines, etc. There is a short circuit, high current or corrosion, etc., which will cause the mobile phone to become a screen after water ingress.

Hello! The above is the analysis of the reasons why the mobile phone is flooded and the screen is still on, but the screen becomes a snowflake screen.

Thank you. This is much more difficult for ordinary people, you have to find a professional to see, I thought the screen was broken, and you can change the screen.

Hello! Yes, you have to find a professional to check to know what the situation is.

If the mobile phone is in water, the screen is distorted: If the mobile phone is okay in other places, it is just a screen flower, and it is necessary to take it to a professional place to change the light paper in the screen.

If you find that your phone has fallen into the water, you must pick it up in time. Quickly wipe off all moisture from the body. Remove the soft rubber case of the mobile phone, because the soft rubber case will get stuck in the water.

Use a cotton swab or paper towel to quickly drain the water in the earphone hole and the water in the charging hole. Do not turn it on, send it to a professional place for repair.

If the screen of the mobile phone gets into the water and becomes flowery, you use a hair dryer to dry the phone, and if it is dried or flowered, you will take it to the repair shop to repair it, and if it is repaired, it will be broken, so you will go and buy a new one.

Don't turn it on at this time, if you turn it on, it will be very easy to damage your screen, at this time all you have to do is try your best to empty the water in your screen.

Go for repairs as soon as possible, it's still not safe to get into the water and change flowers.

In the later stage, if the motherboard is accidentally burned, it will be very troublesome, and there will be a lot of cost.

Personal advice.

I quickly took a hair dryer and blew it, preferably, and put it in that rice, and then it was ready to use the next day.

Shut down and send it to the maintenance department for maintenance

Take it to a professional for repair and use.

In this case, look for a professional repair cell phone to remove the wet.

What should I do if the screen of the mobile phone is not displayed when the screen is in the water, hello dear, the screen does not display after the mobile phone enters the water, it may be that the LEDs are burned, or the resistors connected in series with them may be burned, or the contact is poor, so the work is unstable. It is recommended to replace the screen with a new screen after the sale. First, after the mobile phone falls into the water, it is also very important to fish out the mobile phone as soon as possible, reducing the time of contact between the mobile phone and water will minimize the damage of the mobile phone.

The longer the phone is immersed in water, the more harmful it will be to the phone's earpiece, microphone, screen, and motherboard. 1.Remove your phone from the water, quickly dry the water on the surface of your phone, and remember not to try to turn it on.

Many users will subconsciously press the power button after taking out the mobile phone to see if the mobile phone can still be turned on, which is very wrong, even if the mobile phone itself is not damaged, once turned on, it may cause the result of burning the motherboard. 2.The correct way to deal with it is to quickly remove the battery after taking out the phone, regardless of whether the phone is turned on before it is dropped.

Then throw a few times at the side with more openings on the phone (such as the data cable interface), or the side with a large gap, and throw out the water in the phone. 3.There is a problem involved here,At present, a considerable number of mobile phones can't open the back shell,What to do if the battery can't be taken out,There is really no particularly good way to do this,Generally, the mobile phone will have a black screen after entering the water,For those mobile phones that can't deduct the battery,Don't try to press the boot button after the black screen,Or throw the water out first。

4.It is not recommended that you take out the battery by disassembling the machine, one is that the disassembly time is relatively long, and the water has already been in contact with the battery at that time, which is of little significance, and the other is that although water ingress will lead to warranty invalidation as private disassembly, but private disassembly may cause more serious damage to the mobile phone than water ingress, so if you are not a master or professional, don't consider the problem of disassembly. Second, if you feel that the water in your phone is almost gone, don't try to turn it on.

As long as the phone is flooded, you should wait at least 24 hours if you want to turn it on. Here what we have to do is to deal with the water stains that remain in the phone. These water stains are usually left inside the phone, and if you try to turn it on, there is still a risk of burning the motherboard.

1.Many people think that after the mobile phone enters the water, use a hair dryer to dry the inside, this method is not impossible, but pay attention to the way of operation, the temperature of the wind blown by the hair dryer is still relatively high, which is basically equivalent to the temperature when the mobile phone is most seriously heated, the closer to the tuyere, the higher the temperature, it is not impossible to be scalded by the hair dryer, so when blowing the mobile phone, you must pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature. Remember not to blow the air vent of the hair dryer directly on the phone, too high a temperature is absolutely not good for the phone.

2.Blow for a few minutes and stop for a while, and then continue to shake the phone, shake it a few times and continue to blow, last 3-5 times It's about the same, the time for the hair dryer to blow the phone should not be too long, 20 minutes is basically fine.

Summary. The mobile phone screen is flooded, what should I do if it becomes flowery, hello! 1. Don't light up the screen, don't press the power button, don't try to shut down, these operations will cause current changes, which may cause a short circuit on the circuit board.

If you can remove the battery, just remove the battery directly. 2. Wipe the water on the surface first, don't move too much, don't shake off, in fact, in the small gap in the mobile phone, there is an air block, simply fall into the water, and it will not enter the water, 3. Remove the back cover, take out the SIM card and TF card, try to wrap the mobile phone with a cloth or tissue for a few minutes, and then put the mobile phone in the heater or under the sun for a few hours. Hope it helps!

What should I do if the screen of my mobile phone gets into the water and becomes flowery?

The mobile phone screen is flooded, what should I do if it becomes flowery, hello! 1. Don't light up the screen, don't press the power button, don't try to shut down, these operations will cause current changes, which may cause a short circuit on the circuit board. If you can remove the battery, just remove the battery directly.

2. Wipe the water on the surface first, don't move too much, don't shake off, in fact, in the small gap in the mobile phone, there is an air block, simply fall into the water, and it will not enter the water, 3. Remove the back cover, take out the SIM card and TF card, try to wrap the mobile phone with a cloth or tissue for a few minutes, and then put the mobile phone in the heater or under the sun for a few hours. Hope it helps!