How can you shoot clearly without turning on the flash when taking photos?

Because if you don't flash it, it will slow down your shutter speed, or you can interpret it as a slower shooting speed, at which point a slight shake will cause you to blur your image.

This depends on whether your camera has an anti-shake function, and the camera without anti-shake is confused in forced no-flash mode, which is a hard flaw of the card machine, and there are 3 ways for you to solve it.

1。Use a tripod, but this method is annoying, who would want to bring a tripod for a card machine.

2。Find supports. You can place the camera against a wall, on a bar, or anywhere it can be stabilized, and gently press the shutter to minimize the shake of the camera.

3。Hold your breath and keep your hands steady after taking a picture". Don't shout about this, you can let the subject do it for you, you just have to stabilize yourself and shoot yourself, of course, this is still likely to be confused, and it is not very comfortable =. =

Let's teach you a simpler, less professional method:

When shooting, press the shutter lightly first, don't press down, and a small box will appear on the screen.

Press the shutter again, and the light will be clear.

This is my experience.

I'm also an i7, and I used to shoot blurry all the time, but now I don't.

In low-light situations, the camera will reduce the shutter speed in exchange for enough exposure, and when the shutter speed is lower than the safe shutter speed (usually considered 1 60s), it may be unclear due to the shake of the photographer's hand!

So, it is recommended to use a tripod stabilization! or increase the ISO value.

dec 06 is the correct explanation.

To add: try to keep only your right index finger moving when you press the shutter, and don't change the strength of the other fingers.

If the shutter is lower than 1 2s, it is better to use a tripod, otherwise you can only take more shots to ensure that you can pick out a satisfactory one from the inside to find a support point.

If you look at the night scene, you must use a tripod, and you can increase the **compensation by illuminating the dusk or dark place, but it is more difficult to control. If your camera has a dusk mode or something like that, you can usually use the camera's maximum capabilities.

If there's enough light, your camera will automatically turn off the flash.

Please switch to a photo mode that supports flash, and the system will automatically disable the use of flash.

If your phone is overheating or the flash is used too often. With some barcode scanning software, the flash will not work.

If the problem persists after trying the above methods, please try again after a period of time. If the flash temperature is too high, you may not be able to use the flash, so please turn it off and turn it on again, such as photo mode. In flash auto mode.

Some photo modes do not enable flash by default, such as time-lapse photography, streamer shutter, etc.

If you have the automatic flash mode turned on, please check to see if the flash mode is turned on. If the flash mode is not turned on, the flash is unusable.

If your phone is charging, unplug the charger and try to see if it works. Some phones can't use flash while charging.

There are many scenes where users need to turn on the flash when taking pictures, how to solve the situation that the iphone12 flash is blurry, and the possible causes and solutions for blurry photos:

1. Insufficient light. Solution: When the current ambient light is low, turn on the flash or use Night mode.

2. Take photos in backlit scenes. Solution: Avoid taking photos in backlit scenes, especially when using the front-facing camera.

3. Shoot through glass or car windows. Solution: In order to obtain high-quality images, it is recommended that you do not shoot through glass or car windows.

4. The subject is in motion. Solution: Click on the subject area when taking a photo to ensure that the focus is clear.

5. The mobile phone holster, fingers, mobile phone film and other objects cover the camera or flash of the mobile phone. Solution: When shooting**, check and keep the camera and flash accessories unobstructed.

6. The camera lens has dust or stains. Solution: Clean the lens and take a new photo.

7. The phone shakes when taking pictures. Solution: Please keep your phone steady.

8. Focus failure when taking photos. Solution: When shooting, please wait for the camera to complete the focus before taking a picture.

9. When shooting macro, due to the shallow depth of field of macro, the foreground will be clear and the background will be blurred. Solution: It is recommended to keep a distance of more than 10 cm when shooting.

What's going on with the blurry photo taken by the iPhone camera?

First, it is recommended that you click on the box in the middle of the screen to focus when taking a photo, which may be clearer.

Second, if it is not blurry caused by no focus, it may be a problem with the mobile phone camera.

If the tempered lens film is attached, the photo will be blurry with a flash, so just remove the lens film.

My S21U took a transparent phone case, and that's it.

1. Turn the flash on or off: When taking photos in a dim environment, you can turn on the flash to increase the ambient brightness. On the camera photo interface, tap to switch between the following four modes:

Auto: The camera automatically determines whether the flash needs to be turned on based on the ambient light. Off:

Do not turn on the flash when taking photos. On: Turn on the flash when taking photos.

2. Open the camera app of your phone and enter the "**" model of the camera. Tap the flash icon in the upper left corner to enter the flash settings page. Select the "On" option to turn on the flash.

3. Taking Huawei P40 and EMUI0 system as an example, the steps on how to turn on the flash for mobile phone photography at night are as follows: turn on the mobile phone and click the button to touch the mobile phone camera. Once you enter the camera, you will see the lightning bolt sign in the upper right corner. That's where the flash comes in.

4. Click the flash switch button in the middle above the photo interface, which is to set the flash switch, which can be adjusted to normally open and normally closed. Basic introduction: Flash: It is a photographic accessory that can emit strong light in a very short time and is photosensitive to photography.

5. To turn on the flash of the Apple hand smile pure machine camera, you need to turn on the camera, click on the symbol, click on the flash, and turn on the flash. First, tap on the desktop of your phone to turn on the camera feature. Click on the " " symbol at the top of the interface.

Then tap the flash icon at the bottom left.

Take Huawei P40 mobile phone, system as an example, how to turn on the flash when the mobile phone takes a photo:

1. Turn on your phone first, and then enter the "Camera" function of your phone.

2. After entering, find a "lightning" shaped icon in the camera interface and click it.

3. Finally, turn on the "flash" function of the mobile phone, or turn on the "automatically turn on the flash" function, and then the mobile phone will automatically judge whether the flash needs to be turned on according to the light of the surrounding environment.

This answer applies to most brands of smartphones, such as Huawei and Apple.

Precautions for using flash on mobile phones:

1. Generally, it is only recommended to use the flashing light in the case of low light, and the effect of the flash is not very strong in the light.

2. It is not recommended to use flash for the bright core in the case of low battery of the mobile phone, and some mobile phones will automatically turn off the "flash" function in the case of low battery.

3. Flash can not be used in all cases, because in some environments there will be a reminder that "it is forbidden to use flash".

Summary. Dear, hello, I'm glad to answer for you, when taking pictures, the flash is good to make + turn on alone, A: If it is in automatic mode and the ambient light can meet the ** needs, the flash will not turn on the fill light; Even when the power is low, it is difficult to start the high-power output.

It should be a problem with the setting of the mobile phone camera, when you set the flash to auto, the flash does not work in a brightly lit place, and only works when the light is dark, and the general automatic mode is a display; In forced flash mode, any light condition works, and the general diagram is a lightning bolt sign; The No Flash mode is also easy to understand, that is, it does not work under any conditions, and the diagram shows a lightning bolt with a slash on it. You open the settings, there are options for the application, and the software about taking pictures is initialized, that is, the cache inside is clear.

When taking pictures, the flash is good to use + it is not good to turn on alone.

Dear, hello, I'm glad to answer for you, when taking pictures, the flash is good to make + turn on alone, A: If it is in the automatic mode state bridge touch pure and the ambient light can meet the ** needs, the flash will not turn on the fill light; Even when the power is low, it is difficult to start the high-power output. It should be a problem with the setting of the mobile phone camera, when you set the flash to auto, the flash does not work in a brightly lit place, and only works when the light is dark, and the general automatic mode is a display; In forced flash mode, any light condition works, and the general diagram is a lightning bolt sign; The No Flash mode is also easy to understand, that is, it does not work under any sensitive conditions, and the diagram shows a lightning bolt with a slash on it.

You open the settings, there are options for the application, and the software about taking pictures is initialized, that is, the cache inside is clear.

It's the flash that is not good to make.

Hello, I'm glad to answer for you, there may be a problem here, generally this kind of fool flash with automatic mode, the flash is also automatic, that is to say, when the light is good, he will not flash, when the light is bad, it will flash automatically, you can try it in the middle of the night, there should be other modes in the scene setting, such as the letter of p, this is the program automatic, this mode can definitely set the flash, if it still can't flash, then the seller will have to take the camera store to warranty.

Summary. When taking pictures, the flash is good + it's not good to turn it on alone, hello! Turn on the camera light can not be turned on Reason 1, it may be because of the flash system damage caused by the problem, when the flash system is chaotic, there will be a phenomenon that the light cannot be turned on normally 2, it may be because the setting prohibits the camera to turn on and cause the problem, when there is an option to prohibit the camera to turn on in the settings, there will be a situation where the flash cannot be turned on 3, it may be due to insufficient memory capacity to cause problems, when the memory capacity is too small, The flash will not turn on properly.

Hope it helps!

When taking pictures, the flash is good to use + it is not good to turn on alone.

When taking pictures, the flash is good + it's not good to turn it on alone, hello! Turn on the camera light can not be turned on Reason 1, it may be because of the flash system damage caused by the problem, when the flash system is chaotic, there will be a phenomenon that the light cannot be turned on normally 2, it may be because the setting prohibits the camera to turn on and cause the problem, when there is an option to prohibit the camera to turn on in the settings, there will be a situation where the flash cannot be turned on 3, it may be due to insufficient memory capacity to cause problems, when the memory capacity is too small, The flash will not turn on properly. Hope it helps!

Hello, dear, thank you for your patience, the answer has been found for you, you check it, thank you!