How does telecom share Internet access over a local area network?

I used a router, and I can use wifi when I buy a wireless one

Sharing can be done using a wireless router.

Telecom full-service wifi Internet sharing time: that is, all telecom products in the ** can be used together with China Telecom's free wifi domestic Internet access time, which can be used in places covered by telecom wifi wireless networks nationwide. For more detailed information, you can call telecom customer service **10000 to understand.

How to use: 1. You can enjoy China Telecom's high-speed wireless network by entering your mobile phone number and SMS verification password in the area covered by China Telecom's wireless hotspot CHINANET. If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom.

2. You can use e-Surfing broadband wifi client for wifi surfing. After confirming that the e-Surfing broadband WiFi client has been successfully installed, you can quickly access the e-Surfing broadband WiFi network by following the following steps:

First, open the client, and the system will automatically search for and connect to China Telecom's e-Surfing broadband WiFi network (a wireless network named "Chinanet"). After setting the e-Surfing broadband wifi and password correctly, you can connect to the network and use it. If you need to check the bill and pay the phone bill, please log in to the Anhui Telecom online camp.

3. In the open web page, Tianyi users, telecom account users, and other users (users on different networks) can log in to China Telecom by accurately entering your account number, password and verification code information in the user login bar according to the page reminder"Wireless broadband"Internet.

This computer that can access the Internet is equipped with dual network cards, and the network card connection for Internet access is set to share. The other piece is set to other PC bar gateway and the DNS settings are ok. There is also the use of third-party software, but each application software needs to set up a server.

It's troublesome.

When the host sets up other automatic acquisition, it is good to actively share the broadband Internet access.

If there is no connection to the Internet, it is a problem with the settings, please use the following method:

After the Telecom Fiber Modem + Wireless Router cannot log in to the routing setting method.

1. First of all, change the wireless router IP: connect your computer with TP-wireless router separately, do not connect the optical modem, so that you can enter the TP settings page, change the router LAN port address in the network settings - LAN port settings to, save, DLINK router is written behind the router Yes, this is no conflict with the default telecom fiber optic modem, you don't need to modify the IP.

2. To the network connection, cancel the "broadband connection" as the default connection; Click Local Join, Right-click, Properties, Select: Automatically get IP address, DNS server, OK; In IE, enter :, account number:

admin password: admin Log in to the router to set up: click the setup wizard, enter the widenet account and password, and select the mode:

pppoe。Save the source and hide the brother.

3. Connect the network cable connected by the optical modem to the WAN port of the router, and continue to set the wireless routing on the TP-Settings page.

4. Fiber Optics Cat Telecom has been set up, and it should not be changed if it can access the Internet;

Now the main thing is to set up a wireless router:

1. Basic settings of wireless network: 1. Turn on the wireless function; 2. Turn on SSID broadcasting. Wireless Network Security Settings:

Turn on the security settings and use the WPA-PSK WPA2-PSK AES encryption method. 1. Selection: WPA-PSK hail attack WPA2-PSK; Type of Certification:

Automatic; Encryption algorithm: AES; Settings: psk password:

Add it yourself; 2. Network parameters: 1. WAN port setting: WAN port connection type: PPPoE; 2. Second connection: disabled; 3. Corresponding connection mode: automatic connection;

3. DHCP server: enabled; Save, restart. It should be possible to access the Internet on computers and wifi.

If you need to buy a machine, please log in to Anhui Telecom Tianyi store, iPhone, Samsung, Xiaomi and other hundreds of mobile phones at low prices on the whole network.

Hope mine can get yours.

1 If you want to be a desktop, you also need a wireless network card, and if you want a laptop, you don't need it.

1. Run the Command Prompt as an administrator, find "Command Prompt" from the start menu, right-click on it, select "Run as Administrator", and click "Yes" in the pop-up user control window.

2. Enable and set the "virtual wifi network card" mode: run the following command to enable the virtual wireless network card: netsh wlan set hostednetwork mode=allow ssid="win7 ap wow!".

key=wifimima。There are three arguments in this command: mode:

Whether to enable the virtual Wi-Fi network card, change it to disallow to disable, and the virtual network card will disappear. SSID: Specifies the name of the wireless network, preferably in English.

key: specifies the password of the wireless network. This password is used to encrypt the wireless network with secure WPA2, which can prevent the network from being rubbed off.

In fact, the above three parameters can be used separately, for example, only mode=disallow can be used to disable the virtual WiFi network card.

3. Enable "Internet Connection Sharing (ICS)" In order to share the connected Internet with other computers or devices, we need to enable the "Internet Connection Sharing" feature. Open the "Network Connection" window, right-click on the network connection that is connected to the Internet, select "Properties", switch to the "Sharing" tab, select the checkbox in it, and select the network connection that allows it to share the Internet Here, that is, our virtual WiFi network card: After confirmation, the "Shared" sign will appear next to the network card icon that provides sharing, indicating that "Internet Connection Sharing" is opened to the virtual wireless network card.

4. Turn on the wireless network, continue to run the following command in the command prompt: netsh wlan start hostednetwork to turn on the wireless network we set up earlier (change start to stop to turn off the wireless network). The virtual wireless network card has turned on the wireless network we specified, and its IP address and other attributes are assigned by the "Internet Connection Sharing" service.

Finally, the landlord notes: If the virtual wireless network card does not appear in the network connection after running the mode=allow command, it means that the real network card does not support this function. You can try upgrading the LAN driver to the latest Windows 7 version, or use an external wireless LAN that supports this feature.

Do you have wireless routing, are you still worried about this problem?

The WAN port of the wireless router is connected to the external network, and the WAN port and wireless are configured in the router, so you can access the Internet with wifi.