Oaks air conditioner has poor cooling effect after turning on eco mode What is the reason for the co

That's not it, or where does one kilowatt-hour of electricity come from?

The Haier I bought at home, the n series is amazing.

Cause analysis: door-to-door inspection, the heat of the opening machine, the wind speed is very low, the air outlet is very hot, the air conditioning mode is converted, the wind speed can be adjusted high and low in the refrigeration and air supply mode, the high and low wind speed is obvious, which proves that the fan motor is normal, and the characteristics of the indoor pipe temperature sensor are suspected.

Maintenance method: After replacing the indoor tube temperature sensor, everything is normal in the test machine.

Experience: When the air conditioner is heating, due to the function of preventing cold air, the indoor heat exchanger of the indoor temperature sensor works with a breeze when the indoor heat exchanger reaches more than 25 degrees Celsius, and works with the set wind speed when the temperature reaches more than 38 degrees Celsius. The above fault is first observed to find that the wind speed is low, and the air temperature is high, so check whether the fan is normal, when the wind speed is judged to be normal, the analysis may be that the sensor check temperature is incorrect, resulting in the indoor fan can not operate at the set wind speed, so replace the sensor.

Temperature sensor failure occupies a relatively large proportion in the air conditioning failure, to accurately judge the first thing to understand its function, the air conditioning control part is equipped with three temperature sensors: 1. Room temperature sensor: mainly detect the indoor temperature, when the indoor temperature reaches the set requirements, control the operation of the internal and external units, stop the external machine when refrigerating, continue to run the internal machine, and stop after the internal machine blows the residual heat during heating.

2. Indoor tube temperature sensor: It mainly detects the coil temperature of the indoor evaporator, and plays the role of anti-cold wind, anti-overheating protection and automatic temperature control during heating. If the temperature of the coil unit does not reach 25 degrees Celsius, the indoor fan will not operate, and the internal fan will work with a breeze when it reaches more than 25 degrees Celsius and below 38 degrees Celsius, and the set wind speed will work when the temperature reaches more than 38 degrees Celsius; When the temperature of the indoor coil reaches 57 degrees Celsius for 10s, stop the operation of the outdoor fan, when the temperature exceeds 62 degrees Celsius for 10s, the compressor also stops running, and only when the temperature drops to 52 degrees Celsius, the outdoor unit is put into operation, so when the coil resistance is larger than the normal value, the indoor unit may not be able to start or run at a low wind speed, when the coil resistance is small, the outdoor unit frequently stops the indoor unit to blow cool air.

When the temperature of the indoor coil is lower than 2 degrees Celsius for 2 consecutive minutes, the outdoor unit will stop running, and when the temperature of the indoor pipe rises to 7 degrees Celsius or the compressor stops working for more than 6 minutes, the outdoor unit will continue to run, so when the coil resistance value is large, the outdoor unit may stop running, and the indoor unit will blow natural wind and there will be no refrigeration failure. 3. Outdoor defrosting temperature sensor: mainly detect the temperature of the outdoor condenser coil, when the temperature of the outdoor coil is lower than 6 degrees Celsius for 2 minutes, the internal machine will turn to the defrosting state, and when the resistance value of the outdoor coil sensor is large, the indoor unit can not work normally.

The eco mode of Oaks air conditioner is an energy-saving mode that can help users save energy and electricity bills. Here's how to use the Eco mode of your Oaks air conditioner correctly:

1.After turning on the air conditioner, press the ECO button on the remote hall stuffy control to enter ECO mode.

2.In ECO mode, the air conditioner automatically adjusts the temperature and wind speed to achieve the best energy savings. The coarse car can be adjusted according to their own needs.

3.In ECO mode, the air conditioner will automatically stop running, and when the indoor temperature reaches the set temperature, the air conditioner will automatically stop running to avoid wasting energy.

4.In ECO mode, the air conditioner automatically adjusts the cooling and heating modes to accommodate indoor temperature changes.

5.In ECO mode, the air conditioner automatically adjusts the wind direction and volume to achieve the best energy saving effect.

In conclusion, the correct use of Oaks air conditioner ECO mode can help users save energy and electricity bills while maintaining the comfort of the room in the town.

Oaks air conditioner ECO stands for intelligent energy-saving mode.

ECO is mainly an energy-saving mode, and you can achieve the effect of saving energy by starting it. Compared with other traditional cooling and heating modes, the eco mode is more energy-efficient and cost-effective in the long run, and many consumers are very satisfied with this model. ECO mode is very energy-saving, in response to the national requirements for energy conservation, environmental protection and low carbon.

Moreover, the temperature of ECO mode is the most comfortable, which is very suitable for the human body, and will not rely too much on air conditioning, which is good for health.

How to turn on Oaks Air Conditioner ECO

This can be achieved by pressing the ECO button on the remote control. Activate the ECO button, the induction probe on the outdoor unit can automatically enter the power-saving mode according to the outside temperature at that time, and in the first stage of air conditioning energy saving, the air conditioner will run at a high frequency and wind speed to achieve rapid cooling. Once the normal required temperature of the human body is reached, in the second stage of energy saving, the orange temperature controller of the outdoor unit of the round sock air conditioner will automatically detect the outdoor ambient temperature.

Different from other air conditioners that "reduce cooling capacity and comfort in exchange for energy saving", its unique two-stage operation mode will take 30 degrees as the critical point, provide different air conditioning temperatures and provide different cooling capacity for different temperature environments, so as to ensure a win-win situation of comfort and energy saving.

1.Confirm the indoor temperature: Before using ECO mode, make sure that the indoor temperature has reached a comfortable temperature range, if the indoor temperature is too high or too low, it is recommended to use the normal mode to adjust the indoor temperature first.

2.Turn on ECO mode: After confirming that the indoor temperature is suitable, you can choose to turn on ECO mode. Generally speaking, the ECO mode is activated by the "ECO" button on the remote control or the "ECO" button on the air conditioner panel.

3.Adjust the temperature: After turning on the ECO mode, you can further save energy by adjusting the temperature. In general, adjusting the temperature to a comfortable range is sufficient.

4.Turn off other functions: To further save energy, it is recommended to turn off other functions such as wind speed, wind direction, sleep hail collapse mode, etc. when using eco mode.

5.Regular cleaning: Air conditioners using ECO mode need to be cleaned regularly to ensure their proper operation and energy efficiency. It is recommended to clean the air conditioner filter and internal parts once a quarter.

In short, the correct use of ECO mode can effectively save energy, but it is also necessary to pay attention to the indoor temperature and the cleaning and maintenance of the air conditioner.

Summary. Hello, dear. The ECO of the air conditioner's remote control indicates the energy-saving mode.

When this mode is turned on, the fixed-frequency air conditioner reduces the power consumption without affecting the cooling by reducing the frequency of the air conditioner starting and stopping the conditioner. Inverter air conditioners will operate at an appropriate frequency at a reduced operating power after the temperature is reached.

Hello, pro-disturbers. The ECO of the air conditioner's remote control indicates the energy-saving mode. After turning on this mode, the fixed-frequency air conditioner will reduce the frequency of air conditioner start and stop without affecting the refrigeration.

The inverter air conditioner will run at a reduced power after the temperature is reached, and run slowly at an appropriate frequency.

The eco mode of Oaks air conditioner generally refers to the energy-saving operation mode of the air conditioner, when this function is turned on, the air fibrillator will run in a more energy-saving way, which is more energy-saving. In this mode, the air conditioner runs the most healthy and environmentally friendly;

When this mode is turned on, the fixed-frequency air conditioner reduces the power consumption without affecting the cooling by reducing the frequency of the air conditioner starting and stopping the conditioner.

When the indoor temperature reaches the normal required temperature of the human body, the temperature sensor controller of the outdoor unit of the air conditioner will automatically detect the outdoor ambient temperature, and reduce the operating power to operate at an appropriate frequency.

Hello, dear, to sum up, it is recommended that you turn on this mode.

The above is my reply, I hope it can help you, I wish you a happy life If the content of the volt helps you, I hope to get your lack of lead first praise Oh, thank you very much! [Bixin] [Bixin].

The eco mode of the air conditioner is more energy-efficient.

The ECO mode of the air conditioner is an energy-saving mode of the air conditioner, which reduces the power consumption without affecting the cooling by reducing the frequency of the air conditioner starting and stopping the conditioner.

ECO is the abbreviation of economic, which means economical and cost-effective. For example, an air conditioner in normal mode generally needs to consume about 8 hours of electricity when it runs continuously, while an air conditioner with ECO mode on only consumes electricity for 8 hours.

Smart ECO Energy Saving Mode: 1 degree to dawn:

After long-term follow-up research and data summary by the technical department, Oaks has created a patented power-saving mode that not only conforms to the rules of use but also maximizes power saving, that is, the core innovative technology of "1 degree to dawn" - intelligent eco energy-saving mode", users only need to start the ECO button.

The induction probe on the outdoor unit can automatically enter the power-saving mode according to the outside temperature at that time, and unlike other air conditioners that "reduce cooling capacity and comfort in exchange for energy-saving effect", its unique dual-stage operation mode will take 30 degrees as the critical point to provide different cooling capacity for different temperature environments, so as to ensure a win-win situation of comfort and energy saving.

The data of the continuous testing of the China Electrical Equipment Research Institute for a month also verifies the power-saving strength of the "blog": in the case of opening the ECO economic mode, the power consumption of the "blog" series DMA35 inverter for 8 hours a night is only 1 kWh.

In this regard, Chen Gang, secretary general of the China Household Electrical Appliances Association, pointed out that from frequency conversion technology to heating technology to energy-saving technology, in recent years, Oaks has seized the technical highlands of the industry with its professional air conditioning R&D and innovation capabilities, and has built a completely independent intellectual property rights of the inverter air conditioning technology industry chain, so as to win the opportunity in the current and future competition of the air conditioning industry, and lead the transformation of Made in China to Created in China.

The above content reference: People's Daily Online - Smart ECO Energy Saving Mode: 1 degree to dawn

The energy-saving mode reduces the frequency of air conditioning starts and stops, and reduces power consumption without affecting refrigeration.

1. The health, sleep and eco functions of Oaks air conditioner are as follows:

1. Health: Activate health-related functions such as air detection.

2. Sleep: Turn on the sleep mode, and the air conditioner will automatically reduce or raise the temperature according to the indoor and outdoor ambient temperature every once in a while.

3. ECO: It is an intelligent energy-saving mode. Compared with other traditional cooling and heating modes, ECO mode is more energy-saving and power-saving, and the temperature of ECO mode is the most comfortable, which is very suitable for the human body, and will not rely too much on air conditioning, which is good for health.

Sleep opens sleep to improve the user's sleep quality.

Second, the role of other modes:

1. Humidification: increase the humidity of the air (currently only Y6PLUS cabinet with humidification function can be used).

2. Auxiliary heating: Open the auxiliary heating tube of the internal machine, which can quickly increase the air outlet temperature and speed up the heating effect.

3. Screen display: control the on/off of the display board of the internal machine. The light-sensing air conditioner automatically turns on or off the air conditioner screen display by detecting the light intensity.

4. Silence: By reducing the speed of the fan in the air conditioner room to achieve the purpose of reducing noise, the refrigeration effect will be reduced after turning on the mute function.

5. Cleaning: The air conditioner cleans the bacteria and dust on the evaporator in the internal machine through four stages: condensation, condensation, evaporation sterilization, and ventilation.

6. Comfort: The air conditioner automatically adjusts the swing angle and air intensity according to the temperature and ambient temperature set by the remote control. Avoid the problem of cold air blowing and improve the user experience (only the cooling mode can be turned on by non-automatic air).