Will it affect if the Mate 30 falls into the water and takes it out immediately?

As long as you don't turn it on right away, it doesn't matter much, but remember to wait until it's completely dry before turning it on. Here's how to deal with it:

Remove your phone from the water, quickly dry the water on the surface of your phone, and remember not to try to turn it on. Regardless of whether the phone is on before it is dropped, quickly remove the battery. Then throw a few times at the side with more openings on the phone (such as the data cable interface), or the side with a large gap, and throw out the water in the phone.

If you feel that the water in your phone is almost gone, don't try to turn it on. Dispose of any remaining water stains in your phone. These water stains are usually left inside the phone, and if you try to turn it on, there is still a risk of burning the motherboard.

After blowing the phone, you still can't try to turn on the phone, because at this time you don't know if there is water in the phone, and then you can dry the phone.

If you bury your phone in rice, it will help to absorb all the water and vapor that remains inside the phone.

At this time, you can try to turn on the mobile phone, if the water into the mobile phone is not serious, it should be able to turn on normally. If you still can't turn it on, you can only ask for after-sales customer service.

If the phone can be turned on, don't be too happy, you need to check the parts of the phone to see if it works.

First of all, check the screen of the mobile phone to see if there will be traces on the screen, sometimes the mobile phone has been soaked in water, and the screen will not display normally after being affected. Then check whether the handset and microphone of the mobile phone can be used normally, and you can test it by dialing **.

Check whether the speaker of the mobile phone can make sound normally, after soaking in water, the speaker may not sound or the speaker does not make sound. Check if your phone's camera is capable of taking photos, including the front camera as well as the main camera.

You can choose a waterproof case to protect your phone, so that your phone is completely free from the danger of blisters in your daily life.

There are two main types of waterproof protective covers, one is universal and the other is exclusive to the model. The so-called universal, is suitable for most mobile phones, not so much a protective case as a protective bag, this waterproof mobile phone bag can make your mobile phone can be used normally underwater, because the appearance is not very beautiful, so more users may only use it in special circumstances, such as going to the beach to play or when it rains heavily, with it you don't have to worry about the problem of water in the mobile phone.

The longer the phone is immersed in water, the more harmful it will be to the phone's earpiece, microphone, screen, and motherboard.

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

HUAWEI MATE30 series are all waterproof, HUAWEI MATE30 5G supports IP53 waterproofing, and HUAWEI Mate30 Pro5G supports IP68 waterproofing. The higher the waterproof level, the better the waterproof performance, so obviously, the IP68 level of the Mate30 Pro is better.

If the phone falls into the toilet, take it out immediately, and if the screen can be turned on normally, turn off the phone immediately and dry it with a hair dryer, and there will be no effect. It's best not to turn it on for a few days.

The impact is not great, and it is best to put it in a rice bag and blow it with a hair dryer.

Will it affect if the Mate 30 falls into the water and takes it out immediately? There won't be any big problems.

Huawei Mate30 is dust and water resistant, and its protection level is IP53. However, the Mate30 mobile phone is not a professional waterproof mobile phone, and it can be splash-proof, water-resistant, and dust-proof under normal use, and the splash-proof, water-resistant, and dust-proof functions are not permanently effective, and the protective performance may be reduced due to daily wear and tear.

Huawei Mate30 is a smartphone developed by Huawei, using Kirin 990 processor, running memory 6GB 8GB, body memory 128GB 256GB, built-in 4200mAh battery, pre-installed EMUI10 system, screen fingerprint recognition, IP53 waterproof, rear super sensitive Leica triple camera, 3x optical zoom, 5x hybrid zoom, 30x digital zoom.

We are sorry to hear this, and in order to reduce your losses, we recommend that you deal with it as follows:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

Let's take a look at the methods that we usually use, after many people's mobile phones fall into the water, the first time is to take out the mobile phone and blow it with a hair dryer, and it is blowing on the opening of the mobile phone, thinking that it can be dry by blowing, in fact, the mobile phone itself is waterproof, under normal circumstances, a short period of soaking in water, it will not penetrate into the motherboard, since it will not go to the motherboard, there is no big problem.

However, if you use a hair dryer to blow it, it will cause water droplets to be forced to the motherboard, which is full of hardware and various wiring, and once it encounters water, it will definitely cause a series of problems such as short circuits. But it's not that you can't use a hair dryer, it's that you haven't mastered the method.

The correct way is to first place the hole of the mobile phone, that is, the place where the mobile phone enters the water, vertically downward, so that the water comes in from the **, after fixing the mobile phone, use a hair dryer to blow from the non-porous place to the place with the hole, so as to avoid bringing water droplets to the motherboard, and you can also heat the mobile phone to a certain extent to accelerate the evaporation of the water inside, but the temperature should be controlled well, and the mobile phone should not be excessively high. In addition, the phone is turned off during the whole process.

This is just an indoor practice, if the outdoor sun is very good, it is easier to do, wipe it with paper, and then fix the phone vertically according to the above method, and put it in the sun to expose it, but this process does not need to be turned off, but the whole process is turned on, and the speaker is turned on to the maximum. Wait 15 minutes to 30 minutes.

The principle of this is very simple,Vertical placement of the mobile phone will not let the water droplets flow to the inside of the mobile phone,Exposure to the sun is to accelerate the evaporation of internal moisture,The last speaker is more important,Although the sound of the speaker is not as good as the sound,But we are not for listening**,But in order to bounce the moisture away from the speaker through the speaker vibration,You can also accelerate the flow of air through sound waves,So as to take away the moisture。

However, the waterproof level of mobile phones is very high, under normal circumstances, if the mobile phone falls into the water and picks it up immediately, shake it a few times and then wipe it dry, there will be no problem, even if it enters the water, it is only one drop or two drops, and it has to reach the motherboard through layers of obstacles, even if it reaches the motherboard, it has to pass a distance to various lines, and the water may have evaporated at this time. Friends, have you ever encountered a situation where your mobile phone fell into the water? If so, how do you deal with it?

If you have a better opinion, remember to share it with your friends.

Do not use it immediately and shut it down immediately. When it's dry, go to the repair phone shop to find the master to disassemble it and wipe it with oil.

I don't think to move, hurry up to the repair shop, see if you can take the phone apart, take it apart and blow it with a hair dryer, close the phone after drying, and then use it, otherwise there is a risk, if the motherboard is short-circuited, it will be a big trouble, a mobile phone is thousands of dollars, or be careful. FYI!

Don't turn it on, don't power it on, take it to the after-sales service to explain the situation, let them get it for you, whether it can be used normally, and see if the water is in.

It is recommended to take it to a professional repair shop for inspection.

If the bottom half of your phone falls into the water, even if you take it out immediately, it will have an impact. Because the water has already entered the inside of the phone.

Here's how to deal with a phone falling into the water.

Step 1: Turn off the power.

After the mobile phone falls into the water, it will automatically power off protection, that is, it will automatically shut down, at this time, do not rush to turn on, it is easy to short-circuit and burn the chip and other components on the motherboard. If the phone does not turn off automatically, it means that the motherboard is not deeply watered and the protection is not touched. However, the water is fluid, so quickly shut it down manually to ensure that nothing goes wrong.

Step 2: Rinse dry.

First of all, determine whether the liquid dropped into the phone is corrosive. If you just drop it into clean water, just throw out the moisture in the phone, this step is only applicable to phones with removable back cover and replaceable battery. Open the back cover of the phone, take out the battery, SIM card, and memory card, with the screen facing the palm, and then shake the phone with appropriate force, and use centrifugal force to shake out the water.

You can also try using a cotton swab to absorb excess moisture from the headphone jack and small slits. If you don't have a cotton swab, you can wipe it with a pen tip or toothpick wrapped in a cotton cloth. For mobile phones that cannot remove the back cover and cannot replace the battery, such as the Apple series, it is best to go to a professional repairer for testing and processing as soon as possible after completing the shutdown operation.

If the phone falls into corrosive liquid (such as seawater, toilet, etc.), don't be afraid of getting dirty, immediately open the back cover, remove the battery, immediately rinse the phone with clean water, or immerse the machine in clean water and try to dilute the corrosive liquid inside, this step is very important, because the corrosive liquid may corrode the main board of the mobile phone and cause the phone to be paralyzed, and then carry out the spinning step.

Step 3: Dry your phone.

Once the moisture is thrown out, the hair dryer is ready to go. Be careful when using a hair dryer to dry, and the location of the blowing is mainly in the open part, such as near the battery compartment, headphone jack, earpiece, etc. It is important to keep the hair dryer at a distance from the phone, and never use hot air to avoid damage to the delicate parts inside the phone.

Your phone is ready to use.

This kind of hard to say, it is generally very hanging in the water, and if you pick it up immediately and dry it, you may still be able to use it.

If you can turn on the phone, you need to see if it can be used normally, if it can be used normally, it is not a big problem, but you have to go to the after-sales service of the mobile phone to deal with it, otherwise the water will easily affect the life of the mobile phone parts for a long time.

Meta30 itself has a waterproof effect, take it out directly, for the sake of insurance, it is recommended to turn off the line, and then take the hair dryer to dry before turning it on.

The lower half of the mate30 mobile phone has a charging port, which is easy to enter the water, causing a short circuit in the mobile phone, so that the mobile phone cannot be used.

The lower half of the mate30 mobile phone falls into the water and is taken out immediately, which will have a certain impact, because the lower half of the mate30 mobile phone has a charging port, which is easy to enter the water, causing the mobile phone to short circuit, so that the mobile phone cannot be used.

HUAWEI Mate30 supports IP53 dust and water resistance, of which Level 3 waterproof ability can cope with daily life sweat and short-term light rain and other scenarios, but it cannot cope with the situation that the mobile phone falls into a basin, pool and other entire immersion in water. It shouldn't matter.

Today's mobile phones have the function of waterproof, do not turn on after being fished out of the water, and let it dry naturally, it will not be affected.

If you only fall half into the water, or all of your phone, my personal advice is to turn it off immediately.

Then if it's only the second half, you can try using a hair dryer to blow the microphone underneath or something.

You can also just leave it there and wait for it to dry naturally, but this time will be longer.

There are also some life hacks on the Internet, such as burying your phone in rice and the like, which can indeed speed up drying, but the effect depends on the situation.