-
To pick up the car, the car inspection generally needs to pay attention to whether the car is a stock car, whether there are sheet metal repair or painting traces on the surface of the car, and whether the car certificate and other procedures are complete.
-
1. First confirm whether it is a new car. When picking up the car, check the production date of the vehicle to be lifted, confirm the certificate, and check the mileage of the odometer, generally 20-80 kilometers are normal mileage. The odometer is more or less indicative of the irregularity of their vehicle.
2. For Xiaobai, it is relatively simple to check the appearance of the vehicle, carefully check whether the overall appearance of the vehicle has bumps and scratches, and see whether the overall paint surface of the vehicle is consistent.
3. Check the interior and lights of the vehicle. Press all the buttons in the interior of the vehicle after powering it on, and see that it can work normally and flexibly, and then one person controls the light switch in the car. One person looks outside to see if all the lights of the vehicle are normal.
4. Finally, check the engine compartment to see if it is clean and tidy, whether there is oil leakage, and whether the various connecting lines are loose.
-
[Pacific Automobile Network] is mainly to check the vehicle and check the information two parts. Check whether the frame number is consistent with the invoice; Inspect the body for scratches; Check whether the on-board tools are complete; Check whether the car maintenance manual is complete; Check that the invoices and other originals are complete.
On the PDI list, there must be the date, mileage, frame number, car model, engine number, gearbox number, interior code and various basic parameters of the car, which can be found on the car for checking.
The exterior and interior inspection is mainly to check whether the exterior is scratched, paint peeling and dents, while the internal inspection is to check whether the items on the vehicle are complete, including the user manual, warranty manual and tools. When conducting internal inspections, it is also necessary to check whether the functions are working properly, and turn on all the lights to check whether they are complete.
In the engine compartment, the main check is whether the amount of oil, cooling water, wiper water, and brake oil is sufficient (between the upper and lower scale marks), and also check whether the pipes and plugs are tightened and will not loosen (especially the negative pole of the battery). Start the engine and turn on the air conditioner on the premise of ensuring safety, generally speaking, as soon as the air conditioner is turned on, the front fan will run.
Ask the 4S shop to raise the car to check the chassis to see if there is oil leakage in the engine gearbox, and check whether the chassis parts are rusty. You can also ask the staff of the 4S shop to tighten the screws of the chassis suspension. (Photo by Pacific Automobile Network Jing Chenchen).
-
Take a look at the appearance.
Generally, from the manufacturer to the first-level dealer to the second-level dealer, after many transfers and then to your hands, so the appearance of the car is not ***, there may be bumps on the way, sometimes in order to save trouble, for some small scratches, you will generally choose to repair it yourself to cover up the past.
It doesn't look out in the dark, but it looks out in the sun. Therefore, when you pick up the car, you must check whether the appearance of the whole car is smooth and whether the color is consistent.
Second, look at the engine nameplate.
If the overall color of the paint surface is dull, the wipers and door seals are aging, and there are rust stains on the brake discs and the bottom of the car, it can be inferred that it has been outdoors for a long time, and it can be judged whether it is a stock car based on the factory date on the vehicle's engine nameplate.
Generally speaking, as long as the domestic car is within three months and the imported car is within half a year, there is no need to worry too much. If the production date is too long, it means that the car is likely to be a test drive or show car, so you don't need to continue to check, just ask for a change of car!
Three look at the interior. After checking the appearance, it is necessary to enter the car to check the interior, such as the vehicle interior, seats and plastic parts, generally there will be no major problems, but it is still necessary to ensure that every function can operate normally, whether the interior is damaged, odor and other problems, and use all the functions that can be used to ensure that everything is foolproof.
Fourth, look at the chassis. Most car owners will not check the chassis when picking up the car, in fact, the 4S store is obliged to cooperate with the consumer to check the chassis when handing over the car, at this time we have to observe whether the chassis is rusty, supporting the bottom or liquid leakage, if there is a change of car immediately.
Five look at the oil. When you first pick up the car, the odometer is mainly within ten kilometers or dozens of kilometers, so pull out the oil dipstick to check and find that the oil dipstick is still relatively transparent, if it turns black or there are impurities, then pay attention.
Six look at the tires. New tires should be normal and undamaged, and the hair of the tires should be visible. If the road conditions in the city where the car is picked up are good, but the tire hair has been worn and cannot be seen, then it may have a problem.
Finally, the car must be driven a few laps, after all the tests are checked, we finally need to drive our own new car on the road to test it, to see if the engine sound is normal, whether the accelerator and brake response is sensitive, if everything is normal, it means that you have a good car can pay to leave, if there is a slow response, abnormal noise, etc., you need to find a sales solution in time.
-
When the new car is delivered for inspection, attention should be paid to the appearance, interior, nameplate, engine, various functions of the vehicle and the vehicle.
Tickets are checked.
1. Appearance: In a sunny environment, check the entire appearance of the vehicle to see whether the paint is complete and whether there is any color difference.
2. Interior: Check whether the interior of the vehicle has traces of use and whether the accessories are missing.
3. Nameplate: The nameplate of the car is generally located on the driver's door or in the engine compartment, check whether the frame number on the nameplate is the same, and leave the factory.
Whether the date is recent.
4. Engine:
Start the car and check whether the engine is shaking abnormally or making abnormal noises.
5. Various functions of the vehicle:
Check whether there are abnormalities in the vehicle's lights, brakes, horns, multi-** systems, window lifting, etc.
6. Vehicle invoice:
Check whether the number on the vehicle invoice and vehicle certificate can correspond to the car to avoid unnecessary trouble when registering.
-
There are two parts: checking the vehicle and checking the information.
The first is to check the vehicle, after starting the engine cold, after about 2 minutes to warm up, such as the engine sound is stable, no strange noise, short-distance test, no special noise in gear change, no abnormal noise in the body, and the use of electronic equipment such as air conditioning and audio is normal.
There are no color difference dimples in the paint surface of the body, especially the front and rear bumpers, the bottom edge of the side of the car, the roof and other parts that are easy to be damaged during transportation, and carefully inspect the windshield; Lift the car to check whether the chassis is rusted or scratched.
-
When you go to pick up the car, you need to pay attention to whether the car is a stock car, whether there are traces of sheet metal repair or painting on the surface of the car, whether the car certificate and other procedures are complete, and whether the interior is worn.
-
Hello, if you pick up the car, first check whether the contract is complete, check whether the relevant things equipped with the vehicle are complete, check whether the exterior paint of the body is damaged, and check whether the functions of the electrical equipment on the car can be used normally.
-
Hello, if you pick up the car, it is recommended to check the paint surface for defects, and the production date of the vehicle should not exceed six months.
It is generally no problem to pay attention to these major items when picking up the car. >>>More
1. Bring all the bills before picking up the car. Such as invoices, factory certificates, insurance policies, warranty policies, and instructions. >>>More
Check whether the car tires are consistent with the car nameplate, etc.
1.Check the exterior paint, glass, tires of the vehicle, and the chassis for oil leakage. >>>More
1. Choose according to the baby's age.
Babies under 7 months old because they can't sit upright, they should choose a stroller with adjustable backrest, this kind of stroller can generally lie flat at a large angle (165 °-170 °), some can even lie flat at 180 °, and some strollers with European and American design concepts have independent bassinets The baby can lie completely flat inside. For babies over 7 months old, the choice of strollers is relatively restrictive, because the baby can sit upright, you can choose a baby umbrella stroller with less function but strong portability, if the economic conditions are better, you can also choose an ordinary baby stroller or a multi-functional baby stroller. >>>More