-
Anonymous users2024-02-06Does the console still work when the monitor is turned off?
-
Anonymous users2024-02-05Some netizens reported that his desktop monitor turned off automatically, so what's going on? Let me briefly introduce to you the reasons and solutions for the automatic shutdown of desktop monitors!
Analysis of the reasons for the automatic shutdown of desktop monitors:
1 Computer host problem because of the black screen shouting Yu Pao.
When it happens in the standby state, the computer will turn off the display after a certain period of standby to enter the energy-saving state, but some hosts can standby normally, and when you want to use the machine, exit the standby state There will be a problem, the computer is unresponsive, that is to say, he can't change back to normal work, and the pure state Of course, the monitor will not light up if the screen is black when standby, you press any key on the keyboard, if the hard disk flashes, etc., it means that the host can switch between normal and standby state, then look down.
2 Graphics card problems Some graphics card problems are frequent black screens No obvious rules It is a hardware problem If the graphics card does not output the normal field signal required by the display normally, the display will change from a green light to a red light standby state, if you are sure of the computer system.
No problem with graphics drivers.
No problem, that is, there is a problem with the graphics card itself, it is recommended that if it is a new computer, go to the dealer as soon as possible to test and replace.
3 In fact, it is a problem with the graphics card or the display, the easiest way is to find a graphics card or monitor to replace it, if you rule out the first point, then it is easy to tell which part of the problem is.
Zheng Chang The solution to the automatic shutdown of the desktop monitor:
Click the Start button, click on the Control Panel.
In the Control Panel, click on "Power Options".
In the Power Options window, click "Choose when to turn off the monitor" on the left.
In the scheduling window, there are 2 settings to turn off the monitor, one is valid for just using the battery, and the other is effective for plugging in the power supply, and you can set the monitor off time according to your preferences.
-
Anonymous users2024-02-04Click on the Start menu, and in the menu that pops up, click on "Control Panel".
After clicking, open the control panel and click "System and Security" on the control panel, if the viewing method on the right side of the control panel is "Category".
After clicking, tap on "Power Options" on the System and Security window
After clicking, open the control panel, if the viewing mode on the right side of the control panel is "small icon" or "large icon", you can directly click "Power Options" on the control panel
After tapping, open the Power Options window and tap on "Change Plan Settings".
Click to open the Bu Li Plan Settings window, and you can set the time to "turn off the monitor".
After setting up, click "Save Modification" to realize the function.
-
Anonymous users2024-02-03Click on the Start menu, and in the menu that pops up, click on "Control Panel".
After clicking, open the control panel and click "System and Security" on the control panel, if the viewing method on the right side of the control panel is "Category".
After clicking, tap on "Power Options" on the System and Security window
After clicking, open the control panel, if the viewing mode on the right side of the control panel is "small icon" or "large icon", you can directly click "Power Options" on the control panel
After tapping, open the Power Options window and tap on "Change Plan Settings".
Click to open the Bu Li Plan Settings window, and you can set the time to "turn off the monitor".
After setting up, click "Save Modification" to realize the function.
-
Anonymous users2024-02-02The first step is to click on the Start menu, and click on "Control Panel" in the pop-up menu, as shown in the figure below.
Step 2, after clicking, open the control panel, if the viewing method on the right side of the control panel is "Category", then click "System and Security" on the control panel as shown in the image below.
Step 3: Click on "Power Options" on the system and security window as shown in the figure below.
Step 4, after clicking, open the control panel, if the viewing method on the right side of the control panel is "small icon" or "big icon", you can directly click "Power Options" on the control panel, as shown in the figure below.
Step 5, after clicking, open the Power Options window and tap "Change Plan Settings" as shown in the image below.
Step 6: After clicking, open the plan setting window, and you can set the time of "turn off the monitor", as shown in the figure below.
Step 7, after setting, click "Save Modification" to achieve the function.
First rule out whether the display problem causes no display, take your monitor to other computers to try if it can be used normally, if you can't check whether the data cable is broken and internal components, if it can work normally on other computers, then you check the hardware in the host Follow-up question: Last month my monitor also had this situation, the monitor suddenly turned off, no response, and then I don't know how to get the monitor indicator light to turn on and you can use it! ： >>>More
1. Problems with the graphics card.
If the graphics card is broken, there will be a blurred screen, and dust will also appear, check the graphics card, open the chassis to remove dust, this reason is the most likely. >>>More
Find the button on the display, press the settings key, and adjust it by selecting the option to adjust the brightness depending on what is displayed.
1. Use win+r keys to bring up the run dialog box, enter the regedit command in the run window to open the registry; >>>More
The motherboard is a little more likely, or it may be a problem with the graphics card, you first unplug the graphics card and clean it up, as well as the memory, and try again.