Why should the car seat be rear mounted?

In fact, there are two important reasons for rear-facing car seats.

1. Increase the force area, if there is a collision, the child's back and head will collide with the seat, due to the large force area, the force on each part will be reduced. Damage is minimized.

2. We know that eggs are easy to break when they are thrown on the ground, but a few eggs are placed on the ground, which can indeed allow a person to stand up, in the same way, in the process of collision, if the positive installation is carried out, due to inertia, the child's neck and head are easily injured, but when the reverse installation is reversed, due to inertia, the child's head is always leaning against the back of the seat.

Tips: According to the Center for Automotive Safety, about 72% of serious accidents are caused by frontal collisions and about 24% of side collisions. Rear-end collisions account for only about 4%.

The NHTSA (National Highway Safety Administration) database shows similar numbers. In a frontal collision, the chances of a person being killed or injured are far greater than being rear-ended.

Not all child safety seats need to be rear-mounted. Group 0+ and Group 0+&1, both types of seats are required.

Group 0+: also known as safety carrycot, it is used at the stage of 13kg at the birth of the baby, about 0 15 months.

Group 0+&1: Rear-facing car seat, used at the age of 18 kg, approx. 0 4 years old.

Group 0+ can only be installed in rear, and Group 0+&1 needs to be installed in reverse before the baby is 13kg.

The reason for the rear-facing installation is to protect the baby's not yet fully developed neck in the event of a collision.

In a collision, the body is restrained by the seat belt and stops moving for a moment, but the head will continue to move forward due to inertia, thus causing an impact on the neck, which is also commonly known as the whiplash effect. You sometimes see some people who have been involved in a collision and have injured their necks for this reason.

In the early stage of infant growth and development, the weight of the head accounts for a larger proportion of the whole body weight, and the influence of inertia will be more obvious. At this stage, the baby's neck bone development is not yet complete, it is very fragile, and if it collides, it is affected by the whiplash effect, which is easy to cause fatal injuries.

The rear-facing car seat provides support for the head and eliminates impact injuries to the neck in a crash.

The safety seat should be chosen according to the age and weight of the child There is no one that is the best, only the most suitable for the child, so you must be cautious when choosing As for** Don't buy too cheap That is a plastic chair It has no effect at all It will only make the child's situation more dangerous.

The brand recommends Kiddy, and many manufacturers in Europe are based on its standards to produce safety seats, and there are examples.

Stiem STM, Broad, Gray, Recaro and many more.

You can take a look at the baby seat to see which one is more suitable for children, and also see what other netizens say about this seat.

Reduces the impact on children during hard braking and impact, reduces head movement and reduces neck injuries.

This refers to car seats for small children.

The car seat is used in reverse for children up to 9 months. It is not safe after this month.

In the EU ECE Regulation, infants and toddlers under the age of 9 months must be rear-facing in a car seat, and in 2013, the new EU regulation i-Size extended the age of rear-facing installation from 9 months to 15 months.

Therefore, for the 0-4 years old group, the child safety seat is required to have a rear-facing installation function, and the child should be rear-mounted until at least 9-15 months without affecting the child's riding comfort.

When the baby is in a smaller stage.

It is best not to use the chair with a relatively large age span in those years, otherwise it is easy to cause danger. In addition, before the baby is 15 months old, it is recommended that parents use a rear-facing safety seat for the baby, and after 15 months, according to the actual development of the baby, consider using a forward-facing safety seat, so as to ensure the safety of the baby.

Each car seat has a different model, different functions, and a different age for the baby. Therefore, when parents buy a safe seat, it is best to choose according to the specific situation of their baby, and protect the baby from all aspects.

There are no more than four places where the seat can be installed: the co-pilot position, the left side of the rear row, the middle of the rear row, and the right side of the rear row. The car seat is placed on the left because:

Seat belts are best fastened, and the driver instinctively protects the left side to give way to the right.

However, it is highly discouraged to install the car seat in the passenger seat. While it may be convenient to keep your baby in this way, this position is the least safe. In addition, the third row of a seven-seater car is less safe, and it should also be avoided as much as possible to be installed in the third row.

The maintenance method of leather seats is:1. Keep away from the heat source, too close to the heat source will cause the leather to dry out;

2. Do not expose to the sun for a long time to avoid the fading of the leather;

3. Carry out regular cleaning and maintenance, wipe off dust with a semi-dry wet rag to keep it dry and tidy;

4. Clean a small amount with multi-functional foam cleaning agent to keep the skin surface dry.

The car seat is placed on the left because the seat belt is best secured, and the driver instinctively protects the left side and gives way to the right side.

Now most riders have a strong sense of safety and will take the initiative to buy and install child safety seats, but have you considered this question of which position is suitable for the safety seat in the car?

In fact, I have always thought that the safest place to install a child seat in the car is the seat behind the main driver's seat, because in the event of a traffic accident, the driver will subconsciously avoid the position on his side to prevent collision damage.

Before the traffic police department did a safety index statistics, respectively, pointed out the danger index of each position in the car, the highest danger index is the co-driver, its danger index reached 101, in turn for the driver's seat 100, the co-driver back seat, the main driver's back seat, the lowest risk factor is the middle of the rear row, its danger index is.

So let's analyze the installation position of the safety seat:

1. Co-pilot position.

This location is very special, due to the airbag, it is not recommended to install it here, because in case the airbag pops out, it may shock the child's head. In order to have some interaction with the child, some parents will install safety seats here to keep an eye on the child all the time, but the safety is low, and staring at the baby will lead to a greater chance of accidents.

2. Middle position in the back row.

Theoretically speaking, this position is indeed a relatively inward position, and this position is the best in terms of safety factor alone, but the safety index of the safety seat is not only a distance factor, but also the interface and the vehicle environment and other factors. There is only one situation in this position where a safety seat can be installed, that is, the middle seat has a three-point seat belt (with an oblique seat belt + horizontal seat belt), and only the seat belt installation is an installation method, but most cars only have a horizontal two-point seat belt in this position, and there is no blocking buffer in front of it, in case the child flies out and will hit the glass, so on the whole, the middle position is not the best choice.

3. Behind the main driver.

This position is a relatively safe position, and there is a seat in front of the secondary protection buffer, but the only drawback is that when you put in or take out the baby, your position is on the left side of the car, that is, near the side of the road, not on the side of the road, so there will also be potential traffic safety risks, so when using this position, you must ensure the safety of getting on and off the car.

4. Behind the co-pilot.

This position is the best choice, this position is convenient for the driver to observe the baby through the rearview mirror, especially to see if the buckle is untied by the baby, and the baby is also on the sidewalk side of the car to get on and off, very safe, this position is also the mainstream installation method.

Therefore, based on the above situation, the safest position should be behind the co-pilot, because this position can be convenient for picking up and dropping off the baby on the right side, and it can also be convenient to observe the baby's situation while driving.

Exactly install a child safety seat, first see which position on the car is the safest.

It is generally recommended that the child safety seat be placed in the rear door position of the car, that is, the position on both sides of the rear row, which are the safest positions for the car. Of these, the position directly behind the driver is the safest.

It is recommended not to place the rear middle seat as illustrated in the question, as this position is not supported on either side and will make the child seat unstable.

to install the Mercedes E200 seat belt.

child safety seats.

As an example, the installation method is as follows:

1. The ISO interface of the Mercedes-Benz E200 child safety seat is in the gap under the rear seat;

2. When installing, move the safety seat to the back seat and connect the safety seat interface, so that the safety seat will be more stable;

3. Then wrap it with a seat belt, which is connected to make the top of the safety seat more snug;

Fourth, after the seat belt is tied, the baby will be able to travel safely, as shown in the figure below

Usually families with babies and cars will install a car seat for their baby.

Generally speaking, when it comes to installing a safety seat, most people will think that it should be facing forward, but some people have heard that it is going to be backwards, so when should the safety seat be installed facing forward? Is it better to install the car seat in the forward or reverse direction? Let's take a look.

It is recommended that the car seat do not start facing forward until the baby is 2 years old. Many parents will feel that the safety seat is installed forward, so that it is convenient for them to see the baby's situation anytime and anywhere, and can let the baby see a good scenery, but in fact, when the baby is still young, the safety seat is installed backwards to protect him.

Therefore, it is recommended that when installing a car seat for your baby, you should decide whether to install it in the forward or reverse direction according to his age. If you want to install it in the opposite direction, you should buy a rear-facing safety seat, or a dual-purpose safety seat, and do not buy a forward safety seat to install it in the opposite direction, which will cause other safety risks due to incorrect installation.

It can't get a good protection effect on the baby's safety, and it's very dangerous.

Regarding the rear-facing installation of child seats, although the general view is that the baby can use the forward-mounted seat after 9 months, and the seats in the 0-1 group under many brands are also designed in this way, the European Union's new i-size (also known as UN R129) child safety seat standard in 2013, one of the obvious changes is to require the baby to use the backward installed seat until 15 months. Many countries in Europe also have a lot of rear-facing seats that can be used up to 5 years of age or more.

No, the first thing is to buy a big brand of seats, and then you have to choose some, the safety factor is relatively high, and you must choose the right position to install the child seat on it.

Yes, if it is installed in reverse, it can better protect the safety of the child, and the child will not be thrown out in the event of a sudden braking, which is generally installed in the back seat, and then installed in reverse.

Children under the age of 9 months need to go for reverse mounting. There is no need for children over 9 months. When using a child seat, be sure to remember the seat belt to make it safer.

Depending on the type of child seat, some can be installed backwards, while others must be installed on the front. Be sure to install the seat correctly according to the type of child seat.

Summary. If the family car does not have an ISOFIX interface, how to fix the car seat is divided into two situations:

1. If the baby's weight is less than 18kg (about 4 years old), it is recommended to install a set of reliable ISOFIX interface device in the 4S store; After fixing the car seat with the added ISOFIX connector, it is also necessary to reinforce the car seat with a seat belt; After all, it is an additional ISOFIX interface, which makes it more reassuring to have an extra layer of protection.

Alternatively, you can do it yourself and buy an ISOFIX bracket:

2. If the baby weighs more than 18kg, then it doesn't matter if there is an isofix interface, just fix it directly with a seat belt. Due to the load-bearing limit of the ISOFIX interface, when the baby weighs more than 18kg, there is a risk of breaking the ISOFIX interface; In this case, the car seat needs to be secured with the vehicle's seat belt, and some car seats have an isofix interface that can continue to be used, but only as an auxiliary connection.

Can a child safety seat be installed without a guide slot.

If there is no ISOFIX interface in the car at home, how to fix the safety seat should be divided into two situations: 1. If the baby weighs less than 18kg (about 4 years old), it is recommended to install a set of reliable ISOFIX interface device in the 4S store; After fixing the car seat through the installed ISOFIX interface, it is necessary to carry and bury the car seat with a seat belt; After all, it is the ISOFIX interface installed by Zhima, which is more assured with an extra layer of protection. Alternatively, you can do it yourself and buy an ISOFIX bracket:

2. If the baby's weight has exceeded 18kg, then it is of little significance to have an isofix interface, and it is good to fix it directly with a seat belt. Due to the load-bearing limit of the ISOFIX interface, when the baby weighs more than 18kg, there is a risk of breaking the ISOFIX interface; In this case, the car seat needs to be secured with the vehicle's seat belt, and some car seats have an isofix interface that can continue to be used, but only as an auxiliary connection.

If there is no ISOFIX interface in the car at home, how to fix the safety seat should be divided into two situations: 1. If the baby weighs less than 18kg (about 4 years old), it is recommended to install a set of reliable ISOFIX interface device in the 4S store; After fixing the car seat through the installed ISOFIX interface, it is necessary to carry and bury the car seat with a seat belt; After all, it is the ISOFIX interface installed by Zhima, which is more assured with an extra layer of protection. Alternatively, you can do it yourself and buy an ISOFIX bracket:

2. If the baby's weight has exceeded 18kg, then it is of little significance to have an isofix interface, and it is good to fix it directly with a seat belt. Due to the load-bearing limit of the ISOFIX interface, when the baby weighs more than 18kg, there is a risk of breaking the ISOFIX interface; In this case, the car seat needs to be secured with the vehicle's seat belt, and some car seats have an isofix interface that can continue to be used, but only as an auxiliary connection.