Shutdown always shows that Windows is shutting down, first aid

What's wrong with this?

As we all know,Now we can install the system at home,The installation system is very fast and the steps are very simple and simple,In fact, some win10 system customers have said that they can be completed,But there are also some users who have installed the driver or some software after the computer can not shut down,So what should I do if there is such a situation,How to solve such a problem? Let me share with you the specific handling method, I hope it will be helpful to you

Win10 computer shutdown keeps showing that it is shutting down, processing method 01: Open this computer.

02Open the C drive.

03Click Manage to find Optimization.

04Turn on optimization.

05Select the C drive and click Optimize.

06Open the "Run" program and enter "regedit" to open the registry.

07Open "HKCY Current User Control Panel Desktop".

You may also like:1Computer shutdown keeps showing that it is shutting down, how to solve 2

When the computer is shut down, it keeps showing that it is shutting down and can't turn off the machine, how to solve it3win7 system computer shutdown has been showing that it is shutting down, how to deal with 4win10 can not be completely shut down after a long time of use, how to deal with 5

The computer shutdown keeps showing how to fix the shutdown.

When the computer is turned off, it always shows that it is shutting down, this kind of thing seems to have happened to everyone, in fact, it is better to feel lucky than a long shutdown time than a long time to turn on. In fact, there are many solutions to the long shutdown time, and we can solve the situation of computer shutdown bloated through these methods.

First, click "Accessories" in the "Start" menu, and then open System Tools", and then click "Disk Defragmenter" under the subfolder to open.

2. After opening the program, select the C drive, and then click the "Disk Defragmentation" button to analyze and organize the disk fragmentation of the C drive, as shown in the figure. After the decluttering is completed, you can fragment the other disks here in the same way.

3. When there are too many programs running in the computer, performing the shutdown operation will make the shutdown very slow, you can close all the running programs, and then click the start menu "Shutdown" operation.

Fourth, we can shorten the waiting time for the automatic shutdown program after shutdown. Click the "Start" button to open the "Run" program, or you can use the key combination Win+R to open it, as shown in the figure.

5. After opening, enter "regedit" in the text box, and then click the "OK" button to open the registry and locate the HKCY Current User Control Panel Desktop node. Then find the waittokillapptimeout key on the right side, and then double-click this key, and enter the numeric data as 3000 in the pop-up form, that is, the waiting time for closing the program is 3000 milliseconds, which is 3 seconds.

There are a lot of computer failures, but it's far more than the above, and then I'll share with you how to deal with the loss of the XP system shutdown button, I hope it will help you

How to deal with the loss of the XP system shutdown button.

1. Use the shortcut key win+r key and enter "command" in the open column.

2. Go to "Group Policy", open "User Configuration - Management Templates - Taskbar and Start Menu" in order, and find "Delete and Block Access Shutdown Command" on the right side.

3. After entering the "Properties" page, we only need to check the "Disabled" option.

The above is how to retrieve the shutdown button. In fact, any system can follow the above steps! I hope that friends who encounter similar problems can try to solve it with the above methods.

You may also like:1The win7 computer can't be turned off, and it's been shutting down.

2.Win7 computer shutdown keeps showing the solution of shutting down.

3.The computer keeps showing how to fix it.

4.The computer shutdown keeps showing how to solve the shutdown.

5.The computer shutdown keeps showing how to fix the shutdown.

One is a hardware problem, and the other is a software problem. Most of the time it's a software issue, you can press and hold the switch for a few seconds and don't let go of the switch and it will automatically shut down. Then reinstall the system, if this problem is still recommended to check the switch jumper on the motherboard or the motherboard.

If it often happens that the computer cannot be shut down, you can try it as follows:

1. Use the latest version of anti-virus software to conduct a comprehensive investigation and kill to determine whether it is caused by a virus.

2. The software or driver is not compatible with the system, reinstall or upgrade the driver.

3. Faults such as memory, graphics card, hard disk bad sector, etc., in addition, voltage instability can also cause crash failures (if the memory is too small, upgrade the memory).

4. Incompatibility caused by upgrading hardware.

5. Too many junk files, too many disk fragments, etc.

6. If it still doesn't work, it is recommended that you go to the computer maintenance department for testing.

There are too many background programs, right?,Look at how many resident programs there are in the system manager.,Generally more than 33 is a lot.,When you install a new system.,When you don't install any software,It seems to be 26.。

Have you used optimization software to optimize your system, and if you have one, you can restore it. If you have made some optimizations to the system like the Optimizer, it will appear that it will not be able to shut down. There are too many background services, will the hard disk always be on when shutting down, if so, you will wait to see if you can turn off, if not, it is best to re-plug the hardware and try it, and then restore the system or redo it.

Not necessarily. An exception may have occurred in a component in the background. If you fix it, you should be able to solve the problem. It's best to start from scratch with an operating system.

1.Perform a clean boot (1) and first create a restore point; (2) Press the windows function key + R key to open the run dialog box; (3) After entering msconfig, click OK to start the system configuration; (4) In the "General" tab, select "Selective Startup"; (5) Clear the check boxes of "Load System Services" and "Load Startup Items", and keep "Use the original startup configuration"; (6) In the "Services" tab, check "Hide all windows" first

Services, and then select Disable all, OK. 2.If that doesn't solve the problem, one-click recovery or reinstallation of the system is the best way to do it.