What should I do if my vivo phone always shows that it is being upgraded and it is starting, but the

It is recommended to try it out as follows:

1. Press and hold the power button to see if you can restart the phone.

2. Shuangqing try: Press and hold the lock screen button for 10 seconds to restart the phone, then press and hold the lock screen button and the volume plus button at the same time, and release it when the vivo interface appears for the first time.

Continue to press and hold the volume plus button on the lock screen until you enter recovery mode, and then select Wipe Data Factory Reset

Erase all data from factory reset; wipe cache partition clears the cache. Wait for the interface to jump, and then select Reboot System Now

Just restart your phone.

3. If you still can't turn it on, it is recommended to go to our local after-sales service center to test the mobile phone, and the address of the after-sales service center can enter the home page of the vivo official website - service - outlet query - query.

Summary. Then this situation is that the motherboard of your vivo phone is damaged, then when the motherboard of your vivo phone is programmed to be damaged, in this case, it will lead to no way to boot normally and no way to run normally.

Hello, for your problem, if such a situation occurs for a long time, there is no way to solve it if you press and hold the power button to restart.

Then this situation is that the motherboard of your vivo mobile phone is damaged, then the motherboard of your vivo mobile phone is programmed to be damaged, in this case, there will be no way to boot normally, and there is no way to guess the normal operation of the megabyte.

So if your problem is long-term and has always been like this, then in this case you have to check the book from the center of things, and they will check your motherboard on the wheel.

Under normal circumstances, if the head of the line on the motherboard is programmed, it can be programmed to solve the problems on your motherboard, but if it is a hard file on the motherboard, you must replace a mobile phone motherboard.

Therefore, the problem of needle Qing hail oak for you, your long-term situation must be a problem with the mobile phone motherboard, which must be sent to the after-sales center for testing in time, and use professional equipment to detect whether it is a programmatic operation problem or a hardware problem of the motherboard.

The most effective way to do this is to then prescribe the right medicine to solve your problem.

Summary. Press and hold the power button for ten seconds to force restart the phone.

2. You can try the double clear of the mobile phone, but the things saved in the memory of the mobile phone will be deleted, this is the operation method: the mobile phone is turned off and the volume up button and the power button are held at the same time for 3 to 4 seconds, after the vivo mobile phone logo appears on the phone, let go of the button to enter the recovery mode, first select wipe data factory reset, select wipe cache partition after completing the waiting interface jump, and select reboot after completion System Now will do the trick by restarting the phone immediately, and you will lose all the data on your phone.

vivo mobile phone system upgrade can't turn on, keep staying in vivo interface, what's going on?

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello dear, happy to answer for you. This is a system problem, you can flash the machine and try it.

Press and hold the power button for ten seconds to force restart the phone. 2. You can try the double clear of the mobile phone, but the things saved in the memory of the mobile phone will be deleted, this is the operation method: the mobile phone is turned off and the volume up button and the power button are held at the same time for 3 to 4 seconds, after the vivo mobile phone logo appears on the phone, let go of the button to enter the recovery mode, first select wipe data factory reset, select wipe cache partition after completing the waiting interface jump, and select reboot after completion System Now will do the trick by restarting the phone immediately, and you will lose all the data on your phone.

If it doesn't work, you can go to the local after-sales service center for testing and processing, and the address of the after-sales service center can enter the homepage of the vivo official website - service - outlet query - for inquiry.

After upgrading, it has been stuck in the vivo interface and cannot be turned on - it is possible that the upgrade caused a data error, and you need to re-enter the recovery mode to clear all the data to solve it, select Wipe Data Factory Reset

Hello landlord, in this case, it may be caused by the failure of the mobile phone upgrade, it is recommended that you press and hold the power button to see if you can restart the phone. After restarting the phone, if you are still stuck in this interface, you can only be advised to upgrade the package and upgrade the system by manually flashing the phone.