How to install the sanitary partition board, and what is the sanitary partition called?

The lower part of the toilet should be designed to have a certain distance from the ground, there is no hard rule, 10-15cm, which is conducive to the mop cleaning height. The partition distance, to be considered together with the total length, is generally 80-100cm. The distance of the ceiling, it does not matter, is mixed room, only consider the height from the ground to the top of the partition, generally 240-280cm.

If men and women are separated independently, then consider the height from the ground to the top of the partition, generally 180-210cm.

1. Construction preparation.

1.Material Components.

2.Main tools: electric hammers, taps, screwdrivers, glass glue guns.

3.Working conditions: The installation of floor materials and wall materials in the toilet is completed.

Second, the process flow.

1.Process flow: on-site pay-off, factory processing, on-site installation, glue closing.

2.On-site pay-off: According to the requirements of the design and construction drawings, according to the location of the site, prepare the processing list of compartment plate sizes. The processing list should compile the building number, the number of floors, the room number and the bathroom number.

3.Factory processing: The manufacturer processes according to the processing list of compartment plate products, the material requirements of the design and the processing requirements of the design drawings. After processing, a number consistent with the processing list number is prepared.

4.On-site installation: Before on-site installation, first check the processing number of the factory's compartment plate products, and then pay off the wall and ground of the bathroom, and draw the position of the installation compartment plate fixtures for drilling; The compartment plate is in place to correct the position; Install compartment plates and fixtures.

5.Glass glue: For fixed compartment panels, make transparent acid-free glass after installing the fixtures.

3. Quality standards.

1.The variety, specification and performance of the materials used in the partition wall project of the partition board. The pattern and color should meet the design requirements.

2.The surface of the compartment board should be consistent in color, smooth and clean, clear and beautiful.

3.The joints of the compartment panels should be horizontal and vertical, and the compartment panels should be free of cracks, chips and scratches.

4.The allowable deviation and inspection method of the installation of the compartment plate shall comply with the provisions of the Code for the Acceptance of Construction Quality of Building Decoration and Decoration Engineering.

Facade verticality: 2mm.

Square yin and yang angle: 2mm.

Fourth, the protection of finished products.

1.After the partition panel is installed, there is only a small amount of hardware, lamps or sanitary ware installation work in the bathroom. A registration system is implemented for the types of work and personnel who need to be constructed to enter the toilet where the partition board has been installed, and the protection of the finished product is implemented to the person.

Unrelated persons are not allowed to enter the restroom site where the cubicle board is installed.

2.Once the compartment board is installed, hang the door lock or latch to prevent the wind from damaging the compartment panel. And close the bathroom door and door lock with your hand.

Home ** Reviews.

When choosing a sanitary partition board, we should pay attention to its quality, and after the installation is completed, it should be repaired regularly to ensure that the sanitary partition board will not be broken for a long time.

Sanitary partitions are made of man-made panels, composite panels, PVC panels, plastics, etc

1. Man-made panels.

No edge tightening is required for integrated molding, chamfering, beautiful and generous, no edge seam treatment, with novel hardware accessories, the appearance is consistent as a whole. 12 or 18mm thick phenolic resin high pressure plate, moisture-proof, crash-resistant, foul-resistant, easy to clean.

2. a composite board.

The honeycomb board is pasted with plywood and Menine board, which is light in weight, easy to be damp and degummed or corroded, aluminum or stainless steel edge strip treatment, easy to deform and oxidize, easy to invade and expand and corrode by water vapor, and doors, door posts, and partitions need to be seamed or metal edges, and the overall effect is poor. The cost is low, the durability is poor, and the maintenance and obsolescence are fast.

3. PVC sheet.

Panels made of PVC with a honeycomb mesh cross-section. It is a kind of vacuum blister film, which is used for the surface packaging of various panels, so it is also known as decorative film and adhesive film, which is used in many industries such as building materials, packaging, and medicine. Waterproof, flame retardant, acid and alkali resistant, mothproof, light weight, heat preservation, sound insulation, shock absorption.

4. Plastics. Plastic material, waterproof, but not resistant to high temperature, not scratch-resistant, easy to deform and pollute, plastic or aluminum edging, no overall feeling, poor texture, easy to deform, few color choices.

Dry and wet separation, generally with tempered glass partition and aluminum alloy frame can be customized!

The best sanitary partition is compacted board.

Hello, there are many materials for Camerfot sanitary partitions, and the common ones are:

Compact board: It is made of phenolic resin and wear-resistant kraft paper pressed by high temperature and high pressure.

PVC foam board: It is composed of hollow PVC and fireproof board on the surface.

Aluminum honeycomb panel: a metal material, which is made of aluminum sheet with a middle aluminum honeycomb core and a special surface surface.

Compact honeycomb panel: It is composed of an aluminum honeycomb core in the middle and an compact panel on the surface.

Moisture-proof board: The board is composed of moisture-proof particles.

Filament board: composed of phenolic resin and wood fibers.

Generally PVC, material.

Or the finished product of the pressed partition door.

Enter the area and get the decoration for free**].

In addition to the need to do waterproofing in the bathroom, the installation of partitions is also very important, today I want to share with you how to install sanitary partitions and what are the types of sanitary partitions, friends who want to know may wish to take a look at it together! 1. How to install the sanitary partition 1. First of all, according to the size of the drawing, lay the floor tiles of the partition wall and floor in the bathroom, and do a good job of waterproof measures on the ground, so as to avoid the problem of dampness in the bathroom. 2. The next step is to install the partition wall panel of the bathroom, which only needs to be positioned according to the side wall in the top of the ruler.

3. After that, use a percussion drill to drill holes, and install the feet, and then directly install the panel, buckle the horizontal beam, and then find the position of the partition separation, drill the hole, install the corner code, the upper partition, install the hinge, debug the partition door, install the lock and handle. 4. After the partition wall of the bathroom is installed, remember to debug in each squatting position, check whether there is any inconvenient place to use, check that there is no problem, and finally clean it, and you can officially use it after passing the acceptance. 2. What are the types of sanitary partitions 1. Tempered glass This kind of glass is a safe glass, which is widely used in doors and windows of high-rise buildings, glass curtain walls and indoor partition glass, as well as ceilings, sightseeing elevator passages, furniture, glass guardrails, etc.

2. Metal material In addition to playing a good waterproof treatment, the sanitary partition of this material has other advantages, such as: light weight, energy saving, easy installation, maintenance and strong accessibility. It has a good sound insulation effect, and also has the advantages of heat preservation, heat insulation, moisture-proof, fireproof effect, non-toxic, environmental protection and so on.

Summary: The above is to share for you how to install the sanitary partition and what are the types of sanitary partitions, I believe you have a corresponding understanding after reading the above sharing, if you need to know more about it, please continue to pay attention to Qeeka Home**, will answer for you one by one.

Do the math how much it will cost you to renovate your home

Since some bathrooms include showers, it is necessary to make better use of the space. How to install the sanitary partition? Let's take a look.

1. According to the size of the drawing, pave the floor tiles of the sanitary partition wall and floor, and take waterproof measures to avoid moisture and other problems.

2. Install the panel of the sanitary partition wall (the front railing of the door leaf): a small number of squatting partitions (most of them need to use the tie rod), only need to use the inner wall of the ruler to locate (the position of the foot is the depth of the steeplechase size, and the width of the partition).

3. Percussion drill hole, install the foot, directly install the panel on the beam, (divide the width of the door), buckle the upper beam, and then find out the separation position of the partition, drill the hole, install the corner code, install the partition, install the hinge, debug the partition door, install the lock and handle, and it can be completed.

4. After the installation of the sanitary partition wall is completed, remember that each squatting position should be debugged and checked to see if there are errors or inconvenient places to use. After the inspection is completed, it should be cleaned and cleaned, and it can be officially put into use after passing the acceptance.

When decorating the bathroom, in order to ensure the overall aesthetic effect and make the bathroom able to use normally, most people will install partitions in the bathroom. So how to install the toilet partition and how to design the partition in the bathroom, do you understand? Now let's take a look.

1. How to install the sanitary partition.

1. Determine the center line of the fixing piece on the wall first, and install the fixing plate; 2. Install and adjust the base according to the pre-designed construction drawings; 3. After the first two parts are adjusted, the compartment plate can be installed, and the spacing can be controlled at 15cm; 4. Fix the tie rod on the edge of the column with screws; 5. Fix the column on the compartment plate; 6. Install the door leaf and adjust it to satisfaction.

Second, how to design partitions in the bathroom.

1. Build a wall in the bathroom as a partition, which is the standard decoration of a small apartment, which can not only prevent the water from flowing outside, but also is much more handsome than installing a shower room in the bathroom.

2. If it is a closed shower room, then it will be a little stuffy inside, so you can choose a half-type partition and use a glass pane, which can make your bathroom larger.

3. If you design an ordinary partition in the bathroom, it is difficult to prevent water vapor from gradually entering the living room, so why not install a shower room inside? This not only plays a role in separating dry and wet, but also makes the interior more beautiful.

4. In addition to the role of isolating the space, the partition can also be equipped with a towel rack on the wall, so that it reflects a stronger storage function, and at the same time facilitates the daily shower in the bathroom.

5. In addition to installing glass or wall partitions in the bathroom, shower curtains can also play a very big role, according to their own preferences, install different styles of bath towels, and at the same time make a bathroom cabinet on one side of the bathroom cabinet as a partition, the effect is very good.

About how to install the bathroom partition and how to design the partition in the bathroom, it will be introduced here first, do you know about it? Sanitary partitions can not only provide a good separation of wet and dry, but also enhance the overall aesthetic effect and design a satisfactory style according to your preferences.

<> the installation of sanitary partitions should first be based on the design drawings, on the wall side of the bathroom, determine the center line, do a good mark, install the fixed plate, and install the adjustment base; After the base is installed firmly, the installation of the compartment plate is carried out, and the spacing is more appropriate at 15cm; Determine the position of the column, on the edge of the column, fix the column with screws, fix the column on the compartment plate, determine the position of the door leaf, and install the door leaf. It should be noted that the bathroom is installed with partitions, to ensure sufficient lighting, and to ensure that the ventilation effect is good, the bathroom partition is generally not set next to the window, which will affect the overall effect of the bathroom. In addition, the partition must be against the wall, otherwise the whole effect will be affected.

The color of the partition is not recommended to be too dark to ensure that the overall effect of the bathroom is better.

The toilet is a toilet and a place for washing. Therefore, some people use sanitary partitions to separate these areas of the bathroom. This is very common.

However, some people do not simply tell how to install the sanitary partition. And what to pay attention to in its process. So, let's talk about how to install the sanitary partition board?

There are also a few things that must be noted.

1. Wall fixing piece, draw a good line on the wall, through the line in three positions, embed the plastic plug and insert it into the hole, and finally fix it on the wall with expansion screws.

2. Adjust the foot base, draw the center line of the adjustment foot position on the floor, adjust the foot base, and fix it on the floor 150 mm away from the front end.

3.Place the partition between the wall fixture and the adjustment footholder, and lift the plate off the ground. The general height is 145 mm. Once determined, secure the partition to the wall fixing with screws. Finally, adjust the footholder.

4.Cut and fix the tie rod according to the actual length of the compartment. When the straight rod connection is flat, the round fitting sleeve and spring plate need to be attached to the tube so that the fitting is flat and firmly fixed on the ground.

For the 90-degree angle tie rod next to the compartment, the 90-degree angle joint of aluminum alloy injection molding is used to connect the rod at the end of the corner. Secure the sleeve with a protruding circular wall and secure the rod to the wall with screws.

5.The door leaf and safety hinge seat are fixed to the upper and lower columns, the hinge part is fixed to the upper and lower leaf doors, and the self-homing nylon seat is placed in the hinge seat, so that the door can be opened and closed at will according to the desired angle.

1.The bathroom should be laid with floor tiles and wall tiles first, and partitions should be made according to the actual size.

2.Install drains and install floor drains before installing floor tiles.

3.The door frame will block the water. If there is no door frame, you will need to install a door stone (cm from the ground). Otherwise, there is a risk that the shower water will not flow out from under the door.

This is how to install the sanitary partition board and its precautions. If you want to install it but don't know how to install the sanitary partition, you can refer to it, it will definitely be useful.

You can get it for free