-
There are many reasons for the blue screen of the computer, first, caused by viruses, it is recommended that you boot up and press F8 to the safe mode to fully disinfect, second, system problems, reinstalling the system can be solved, third, there is a conflict between software and hardware, or there are multiple anti-software, fourth, there is dust in the chassis, falling on the memory slot, it is recommended to clean up the dust of the chassis comprehensively, fifth, the CPU temperature is too high, change to a larger fan, sixth, the memory module problem, one is the memory magnetization, wipe it off with a skin, if there are multiple memory sticks, There may also be incompatibility and cause a blue screen, the memory quality is not up to par7 theft board software will also cause the blue screen of the 8BIOS settings are wrong, or the overclocking is unsuccessful, it will also cause the blue screen, the solution, you can remove the motherboard battery and restore the BIOS settings to the default settings through the motherboard discharge, --Fei Ōfei answer--- plagiarism is shameful---d%a supplement: %d%a black screen has a reason very,,One is caused by a virus,Try the full antivirus,The second is a system problem,Or there is a conflict between software and hardware, Reinstalling the system can be solved, the third is the graphics card problem, the graphics card driver is wrong or the graphics card is broken or the graphics card is loose Clean up the dust of the chassis, wipe off the gold finger of the graphics card with a skin to see if it is magnetized, 4 hardware problems, such as memory sticks, CPU graphics card, motherboard, and other hardware, whether there is looseness 5 Display problems The display is broken 6. The hardware acceleration settings are too high and exceed the frequency range , click the Windows "Start" menu - "Control Panel" - double-click the "Show --- troubleshooter" tab, in the " Hardware Acceleration, gradually drag the slider from Full to near None -- click the OK button. 7BIOS settings are incorrect or overclocking is unsuccessful Black screen can be reset to the default value by discharging the motherboard 8 Black screen when opening the program, for example, the game, one is that the graphics card does not meet the requirements of the game and is hacked, and the other is that it conflicts with the program, so it is black and crashes 9 Hit Microsoft's black screen plan It is recommended to reinstall the system --Fei Ōfei Answer--- Plagiarism is shameful--- plagiarism must be reported--- thank you--- I wish you a happy and healthy %d%a+1%d%aLike%%a
-
Use the computer manager hardware to test the temperature of the CPU, graphics card, and hard disk when playing games to see if the temperature is too high and automatically shut down, if the temperature is too high, you need to clean the dust of the host, and place the host in a ventilated place.
Check to see if the memory module is plugged in tightly and if there is too much dust in the memory module slot. Pull out the memory module and wipe the gold finger with an eraser, and clean the memory module slot.
Whether the power supply quota is too small, resulting in insufficient voltage, whether it is too close to the power supply quota or exceeded. If it is a problem with the power supply, the power supply needs to be replaced.
-
Restart the computer and press F8 when the screen is black, until a line and a bunch of English appear, then press Enter
-
I can't turn on the machine, and the ink screen has English.
-
Summary. Hello, the above questions will be answered by me. A bunch of English solutions appear on the black screen of the computer:
1.If the mouse keyboard light does not turn on. Turn off the power cord, unplug the power button, press the power button, and then turn it on.
2.If it is not resolved, it can be judged that it is a memory problem. Reinsert the memory module, clean the cheat, and reinstall it.
3.If it doesn't work, check the graphics card inside the case. Mainboard.
Whether the plug of the power cable is gray or loose. 4.If the mouse and keyboard light is on, the host will work normally, and the internal problems of the host chassis will be basically eliminated.
5.Plug and unplug the monitor data cable and power cord to check. If there is a sound entering the system, the monitor will not be displayed, and the monitor will be connected to another host for testing.
Check the display cable connecting the monitor interface to the display card behind the chassis, and check whether the wiring of the display is broken. 6.It could also be caused by recently installed programs or plugins.
Uninstall, then check for extra startup items and close unnecessary programs and services. Hope it helps!
Hello, the above questions will be answered by me. A bunch of English solutions appear on the black screen of the computer: 1
If the mouse keyboard light does not turn on. Turn off the power cord, unplug the power button, press the power button, and then turn it on. 2.
If it is not resolved, it can be judged that it is a memory problem. Reinsert the memory module, clean the cheat, and reinstall it. 3.
If it doesn't work, check the graphics card inside the case. Mainboard. Whether the plug of the power cable is gray or loose.
4.If the mouse and keyboard light is on, the host will work normally, and the internal problems of the host chassis will be basically eliminated. 5.
Plug and unplug the monitor data cable and power cord to check. If there is a sound entering the system, the monitor will not be displayed, and the monitor will be connected to another host for testing. Check the display cable connecting the monitor interface to the display card behind the chassis, and check whether the wiring of the display is broken.
6.It could also be caused by recently installed programs or plugins. Uninstall, then check for extra startup items and close unnecessary programs and services.
Hope it helps!
As soon as the machine is turned on, how to solve it.
Hello, the above questions will be answered by me. 1. This phenomenon means that the system files are lost or damaged, and the system should be restored before it can be started. 2. The method of system recovery is:
After rebooting, hold down the F8 key to open the boot menu, and select the last normal boot item. You can resume the boot. 3. If this method fails to start the computer successfully, it means that the system is seriously damaged and the system needs to be reinstalled.
4. If the motherboard battery is out of power, this phenomenon will also occur. Let's get a new battery. Note: To update the battery, you need to turn off the power, then unplug the outlet, and then remove the battery.
Hope it helps!
-
Summary. Hello, dear, a bunch of English may be the computer has suffered from an operating system crash, software failure, or hard drive corruption. You can try the following workarounds:
1.Force restart: Press and hold the computer's power button for more than 10 seconds until the computer shuts down.
Wait a few seconds before pressing the power button to restart your computer. 2.Restore the operating system:
If you're still having problems after restarting, you can try using Windows Recovery Environment or using Safe Mode to start up your PC. You can press the F8 key or the Shift key when your computer starts up and select the "Safe Mode" option. 3.
Check for software and hardware failures: If you're still having problems with your PC after it starts up, it could be because of a software error or hardware failure. You can try to check your computer's hardware devices such as RAM, hard drive, graphics card, etc.
You can also try reinstalling the operating system or application software to resolve the software error. 4.Seek professional help:
Hello, dear, a bunch of English may be the computer has suffered from an operating system crash, software failure, or hard drive corruption. You can try the following workarounds:1
Force restart: Press and hold the computer's power button for more than 10 seconds until the computer shuts down. Wait a few seconds before pressing the power button to restart your computer.
2.Restore the operating system: If you're still having problems after restarting, you can try using Windows Recovery Environment or booting your computer in safe mode.
You can press the F8 key or the Shift key when your computer starts up and select the "Safe Mode" option. 3.Check for software and hardware failures:
If you're still having trouble with your computer after starting up, it may be due to a software error or hardware failure. You can try to check your computer's hardware such as memory, hard drives, graphics cards, etc. You can also try reinstalling the operating system or application software to resolve the software error.
Hello dear You follow my steps above to deal with it step by step, do you have a forced shutdown.
-
Dear Hello, glad to answer for you, when the computer appears black screen and a bunch of English appears, it is usually caused by problems such as system file corruption or hardware failure. Here are some possible workarounds:1
Restart your computer: Try pressing the power button on your computer, shutting down your computer, and then restarting your computer. Sometimes, this can solve some temporary problems.
2.Enter Safe Mode: Try to enter the safe mode of your computer, which can be entered by pressing the F8 or Shift+F8 keys when you start up the computer.
In Safe Mode, you can check your computer's hardware and software to find out what's wrong. 3.Restore the system:
If your computer has a black screen and a bunch of English appears, it may be due to corrupted system files. You can try to use a Windows installation disk or a recovery disk to restore the system to the most recent viable state. 4.
Check the hardware: If your computer has a black screen and a bunch of English appears, it may be due to a hardware failure. You can check your computer's hardware, such as memory, hard drive, graphics card, etc., to find out what the problem is.
5.Seek professional help: If none of the above methods can solve the problem, it is recommended that you seek professional computer repair help to find out the problem and fix it.
It should be noted that the black screen and a bunch of English may be caused by different issues, the above methods are just some possible solutions, and the specific solutions may need to be adjusted according to the specific situation. You can follow my steps to try it, and you can give me feedback in time if there is no problem!
-
A bunch of English messages on a black screen on your computer may indicate that something has gone wrong in your system, and these English messages are often referred to as the "Blue Screen of Death" or "BSOD (Blue Screen of Death)". Here are the workarounds you can try:1
Restart the computer: Press the pre-plex loss key and press and hold for a few seconds until the computer shuts down. Wait a few minutes and turn it on again.
2.Check the hardware: Check for loose hardware devices such as memory sticks, graphics cards, hard drives, etc., and plug them back in.
3.Enter Safe Mode: Press the F8 key several times when powering on and select Enter Safe Mode.
If you're able to enter safe mode, the problem might be with a driver or application. 4.Update drivers and operating system:
Update the latest version of drivers and operating system patches to ensure that all software is up to date. 5.Perform a virus scan:
Run antivirus software for virus scanning to make sure your computer hasn't been attacked by Repentant malware. If the above methods cannot solve the problem, please contact a professional technician for diagnosis and repair.
-
Hello dear, I'm sorry to keep you waiting. It may be that the operating system has a question about the empty eye, which causes it to fail to boot normally. In this case, it is recommended to try the following steps:
1.Check whether your computer's hardware is normal, such as memory, SSD, graphics card, etc. 2.
Try starting your PC in Safe Mode, and if the operating system boots up properly, some software or driver might be causing the problem. 3.If neither of the above methods can solve the problem, you can consider reinstalling the operating system or finding a professional computer repairer to diagnose and repair it.
In either case, it is advisable to back up your important data in a timely manner.
The computer is overheated, after the automatic shutdown, it cannot be turned on immediately, this is the computer's self-protection error, wait for the inside of the chassis to cool down, before it can be turned on, the ways to solve the computer overheating are as follows: >>>More
1. Poor heat dissipation, the CPU should maintain good ventilation, which is very important. Working too long can also lead to: CPU heat dissipation problems are also an important cause of computer failures. >>>More
Solution 1: Game acceleration.
Solution 2: Update the graphics card driver. >>>More
Here are a few suggestions for your reference:
1) This feature is available in the ATI graphics driver. The graphics card is reset when it doesn't respond to drivers. In this case, you can try to turn off the vpu The specific operation is to click the advanced button where the resolution is set. >>>More
Comprehensive anti-virus Internet upgrade first.
Install Security Guard 360 >>>More