What to do if the toothbrush falls into the toilet and the toilet is blocked

This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

Common methods: 1. Dun cloth method.

Mop the floor with a cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

3. Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

Extended Materials. Post-plugging treatment:

First of all, it is necessary to determine if there is a blockage with a hard object that is difficult to dissolve in water, such as a sanitary napkin.

Towels, vials and jars, etc. If this is the case, you will have to find a special machine to help with a special machine that specializes in unclogging pipes.

Secondly, if the feces are too hard or the paper ball is too large and the clogging occurs, then you can try this small method:

1. There must be a simple toilet at home (that is, a round-tipped brush on one side, and something strung together with an iron rod or glue stick), which is sold in supermarkets and small shops.

2. Prepare a large bucket of water and let the toilet fill with a large amount of water.

3. Generally, water cannot flow down because there are objects blocked between the toilet and the sewer. So, after there is a lot of water in the toilet, you pick up the lachator, aim the round-tipped brush at the toilet drain, and do a piston movement (that is, plug the drain for a while and release it for a while), the principle is: so that the water can form an impact on the blockage in the toilet.

Soon, it will be unobstructed.

4. Pour some toilet cleaners into the toilet bowl often.

Toilet. toilets).

Recently, I saw some netizens share their experience of toilet hygiene at home, because the toilet has some dead corners that cannot be cleaned with a big brush, so I used some useless toothbrushes to scrub, but in the brushing process, I used too much force, and half of the toothbrush accidentally fell into the toilet, and the whole mentality of netizens collapsed. It's funny to know, what if the toilet falls into the toothbrush and is clogged? How do you unclog a toothbrush in the toilet?

If the toothbrush falls into the toilet, don't panic, find some long enough wire at home, and then the head is in the shape of a hook, stretch into the sewer mouth while stirring and slowly lift it up, the toothbrush will be lifted up under the action of the water vortex and hook, and pick it up with your other hand as soon as you can see the toothbrush exposing the sewer pipe; Or use plastic beverage bottles, cut off the bottom of the mouth of the beverage bottle, and then put it upside down at the mouth of the toilet, repeatedly and quickly twitch up and down, and rely on the effect of pressure to suck up or press the toothbrush down, which is the working principle of the toilet plug, so you can also buy a special stopper through the sewer pipe instead of the plastic bottle, and the probability of success will be greater; You can also take a long enough hose, connect the tap water at one end, and wrap the rag at the other end and put it into the sewer pipe, this is to make the pressure of the tap water reach about 4MPa with the help of the rag, and you can have enough power to flush out the sewer and flush out some blockages, but when you put the tap water, you should prevent the two ends from leaking, otherwise the pressure is not high enough.

The above are some of the methods that can help to unclog the toilet in daily life, but if these methods cannot be solved, you can find a professional who has more professional dredging tools.

The shoe brush fell into the toilet bowl and the unclogging method is as follows:

1. The most direct way is to remove the toilet, then take out the shoe brush from the water pipe at the base of the toilet, and finally reinstall the toilet in its original position.

2. If the shoe brush is not particularly deep in the toilet sewer, you can also try to bend the top of the wire into a hook, and then bend the wire according to the shape of the toilet sewer, and finally use the wire to hook out the shoe brush.

3. If the toilet belongs to squatting, it will be more troublesome for the shoe brush to fall into it and block it, and it is necessary to disassemble the sewer pipe from the residents on the lower floor, and only the shoe brush that blocks the sewer can be removed.

Tips for unclogging the toilet:

1. Heat about two liters of water. If you're always throwing things into the toilet and causing it to clog frequently, you can use a combination of hot water, baking soda, and vinegar to unclog the toilet. They work just as well as commercially available water pipe cleaners.

Bring about two litres of water to a boil and let it cool for a while, then pour the other ingredients into the toilet.

1) Use at least two liters of water. Too little water doesn't work because the impulse isn't strong enough to wash away the blockage.

2) The water temperature should not be higher than the hot tea you usually drink. Do not use boiling water to prevent the ceramics of the toilet bowl from being scalded and cracked. Increasing the temperature of the water is mainly to allow the water to pass through or push the blockage.

2. Pour 1 cup of baking soda and 2 cups of vinegar into the toilet. The chemical reaction between baking soda and vinegar helps dissolve the blockage. Any type of vinegar will work, though distilled white vinegar is most commonly used. The two will continue to hiss and bubble when mixed.

1) If you don't have baking soda and vinegar handy, try pouring a few drops of dishwashing essence into the toilet, which may help unclog the toilet.

2) This method cannot solve the toilet blockage caused by hard objects such as toys.

3. Pour hot water into the toilet. Pour water from the opening, not from the seat of the toilet. This way the water has enough momentum to clear the blockage.

4. Leave it overnight. The next morning, the water should have been emptied. This homemade water pipe cleaner removes clogages caused by organic matter.

If you can't unblock the toilet after two attempts, the blockage may be caused by a hard object. Try using hangers, wire hangers, or serpentine tubes.

Summary. The toothbrush fell into the toilet and blocked the toilet, and the solution is as follows.

What to do if the toothbrush falls into the toilet and the toilet is blocked

The toothbrush fell into the toilet and blocked the toilet, and the solution is as follows.

1.If the toothbrush is off the toilet, if it can still be seen, you can directly use the clamp to fish it out. 2.

It doesn't matter if you can't see it, because the toothbrush handle is relatively long, so it usually doesn't flow into the sink of the toilet. 3.At this time, you can use a manual flow device to gently dredge it.

4.Once the toothbrush comes out, just fish it out with a tong.

1. Prepare a large bucket, fill the bucket with water, pour it all into the toilet bowl at one time, and use the momentum of the water to flush the toothbrush down; 2. Fill the toilet with water, then use the toilet to suction the flush port, pump a few times, and wash the toothbrush out; 3. Find a professional sewer maintenance personnel, use professional tools to dredge the sewer, and easily solve the blockage problem.

Several common methods for dredging the toilet 1, indoor toilet blockage, the mop that can be used, must be the kind with a dun cloth, use the dun cloth to block the toilet drain, and then add water to the toilet until the dun cloth is submerged, and then press down the dun cloth with force, so that it can enter the toilet sewer, and then quickly lift the dun cloth, do it a few more times, and you can suck things out.

2. Buy a relatively long plastic water pipe, connect one end of the water pipe to the faucet, and the other end is plugged into the drain of the toilet, and use rags to block the drain, then open the faucet, let the water flow into the drain, and use the water pressure to achieve the purpose of dredging the drain. 3. The use of manual dredge can also solve the problem of toilet blockage, and the manual dredge is not expensive, you can buy it for a few yuan. If none of the above methods can solve the problem, then it is best to ask a professional construction master to dredge the toilet as soon as possible, so as not to affect the normal use in the later stage.

Hello dear, if the toothbrush is flushed, the toilet will not be clogged immediately. Generally speaking, the drainage system inside the toilet bowl is designed to prevent this from happening. However, if the toothbrush is not completely flushed and is hanging from the pipe**, then it will block the flow of water, causing the water level to rise from disturbing the land wax and potentially causing the toilet to become clogged.

If you're worried that this will happen, you can consider using a hail toilet pass. A toilet pass is a special tool that is used to solve the problem of blockage. It can eliminate blockages in a very effective way while reducing the risk of blockages due to toothbrushes or other solid substances that are gently gliding.

Dear, I'm glad to answer for you: What to do if the toothbrush falls into the toilet and the toilet is blockedAnswer: There are two ways, first, if you can see the toothbrush in the toilet, then you can wear disposable gloves.

Match it like it. If that doesn't work, use the second method, use a wallpaper knife to remove the toilet bowl and find a toothbrush. Then buy a toilet with rubber to connect the toilet to the drain.

After straightening. The floor where the toilet is connected is covered with glass glue. Glass glue is only used to stabilize the toilet.

It takes twenty seeps to sell and slip for four hours to use. So be sure to test the water when installing the toilet. It can only be fixed if the clump wax is not leaking.