What are the rules for the use of forklifts, and what are the prohibited behaviors when driving fork

Forklift operation certificate can drive forklifts. As the name suggests, the forklift driver's license is a necessary professional certificate for forklift drivers. Forklifts play a very important role in the logistics system of enterprises and are the main force in the handling equipment of socks and socks.

It is widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy, and is an efficient equipment for mechanized loading and unloading, stacking and short-distance transportation.

1. It is not allowed to use forks to fork up chemicals directlyDangerous goods such as flammables.

2. Before driving, you need to check the engine oil, hydraulic oil, diesel fuel and coolantWhether the electrolyte and other liquid levels are within the allowable range, when insufficient, they should be added according to the standard requirements before they can be used, and check whether the turn signal, brake, and horn are damaged.

3. The goods transported by forklifts should not be stacked too high, so as not to block the viewlead to the occurrence of an accident; If the load on the fork is high and affects the line of sight, the driver should drive the forklift backwards (except for short distance shifts). ）

Fourth, when the fork is suspendedDrivers are not allowed to leave the forklift.

Fifth, it is not allowed to use forklifts for private purposesIt is work that has nothing to do with the job.

6. It is not allowed to drive the forklift out of the factory without the approval of the person in charge of the department.

7. When you're drivingBe aware of passing pedestrians, reduce your speed when turning and be ready to honk your horn at all times.

8. Do not pull out the key when you stop and leavePrevent others from driving, causing undesirable consequences.

9. When the fork is in the airNo one is allowed to stand under the forks.

10. It is forbidden to be shirtlessWear slippers and sandals to drive.

Ten.

1. The goods cannot be raised or lowered during drivingThe forks should always be around 200mm from the ground.

Ten.

Second, forklift operators should pay attention to what they are doing at any timeAlso pay attention to other tasks going on around him.

Ten.

3. Before starting the forkliftSee if it might affect the safety of others.

Be sure to stay safe!

Precautions for safe operation of forklift workers.

1. Check the condition of the vehicle before driving, oil level, water level, tires, pedals, etc.

2. It is forbidden to overload, eccentric, over-high, over-speeding, and when handling over-long and over-wide goods, drive with special care, slow down, slow steering and lifting;

3. It is strictly forbidden to drink and drive, it is strictly forbidden to pick up and play with mobile phones while driving, 4. It is forbidden to work with fork tips: do not use fork tips to push goods or lift goods, when using fork tips to push goods or lift goods, it may cause forklifts or goods to shake.

5. When the vehicle turns, slow down and sound the horn.

6. Prohibition of pushing and pulling operation: the goods cannot be pushed and pulled by forklifts, otherwise the goods may be damaged or fall off.

7. Avoidance: It is forbidden to stand on the goods or cross under the shelves.

8. Stabilize the goods: when the forklift is driving, the mast tilts back in place to stabilize the goods; When driving (with or without load), the distance between the fork and the ground should be kept at 150-200 mm.

9. It is forbidden to enter the mast mechanism: it is forbidden for any part of the body to enter the mast mechanism or between the mast and the body;

10. It is forbidden to suddenly manipulate the handle: whether in the full load or no-load state, the hydraulic control handle must be operated slowly; When the fork is at a high position, if the handle is suddenly manipulated, it will cause the risk of the goods falling or the forklift tipping; Don't stop or drop the shelves.

An operator's license is required.

Article 38 of the Regulations on the Safety Supervision of Special Equipment: "Operators and their related management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles in the field (factory) shall pass the examination of the special equipment safety supervision and management department in accordance with the relevant provisions of the state and obtain the special operation personnel certificate in a unified national format before they can engage in the corresponding operation or management work." ”

Decision on the Establishment of Administrative Licenses for Administrative Examination and Approval Items that Really Need to Be Retained (Order No. 412) Catalog No. 249: Design, Installation, Use, Inspection Units and Personnel Qualification Determination of Pressure Pipelines.