Turn waste into treasure to make small things, turn waste into treasure and make small handmade

Let's make a thousand paper cranes on the paper that you have drawn.

Turning waste into treasure multi-functional mobile phone speaker charging dock. Prepare materials: paper cups, roll paper refills, rulers, pencils, utility knives, mobile phones, glue.

1. First of all, prepare all the materials you need.

2. Then, place the end of the roll paper on the cup and draw the shape with a pencil.

3. Then, cut out the drawn shape.

5. Then, use a utility knife to cut the shape drawn on the roll paper core.

6. Then, put the roll paper core into the hole of the cup, and then glue it in.

8. Then, cut a small opening at the other end of the roll paper core to facilitate the charging cable to pass through.

9. Finally, you can see that the small handmade production of waste into treasure is completed and the problem is solved.

Make a tumbler.

Method 1 [Material]: Ping Pong ball, rubber ball, white latex, rag or shredded colored paper plasticine [Fabrication process].

1) Open a hole with a diameter of 3 cm at the top of the rubber ball, and put about one-third of the plasticine equivalent to the ball from the hole to the bottom of the ball to make the body of the tumbler.

2) Use white latex to make the head of the tumbler on the small round hole of the table tennis ball viscose ball (3) Use a cloth corner or colored paper to cut out the tumbler facial features and limbs respectively on the head and body Method 2 [Materials] rice, bowls, chopsticks, toilet paper, eggs.

Production process]1) Use chopsticks to poke holes in the top of the egg, stir the egg whites and yolks with chopsticks, let the egg yolks and egg whites flow into the bowl, rinse with water, and dry with toilet paper.

2) Pour some rice into the small hole just punctured by the egg, and then pour some glue to fix the inside of the egg (3) Make a round hat with colored paper.

4) Glue the hat to the hole in the top of the egg.

5) Draw a face, eyes, nose, and mouth for the tumbler.

Method 3 [Materials] Cardboard pieces, table tennis balls, steel balls or glass balls, colored pencils, utility knives, latex [production process].

1) Make a cylindrical drum out of a piece of paper.

2) The table tennis ball is divided into two halves first, and the end of the cylinder is half glued first.

3) Steel balls or glass balls (steel balls or glass balls roll freely inside), put the other half of the cylinder, stick the other end of the table tennis ball, and assemble the body of the red panda.

4) Draw a portrait of your favorite animal on the outside of the cylinder.

The small animal that can turn its head is made of a vertical vertical place on the page, and gently pushes it, and it will turn its head and go forward.

You go to the DIY bar to take a look, there are a lot, and there are meat nets.

After the drink bottle has been drunk, you can clean it, cut it from the middle, reduce the thick and hard part of the bottle, and then make it into a small vase or small flower basket according to your preference.

The small production tutorial is as follows:1. Cut off the mouth of the bottle along the edge of the bottle label.

2. Tear off the packaging and use a lighter to quickly crack the hot bottle mouth to make the edge of the bottle mouth less sharp.

3. Use an awl to pierce a circle of small holes on the edge of the bottle mouth, and the distance between the small holes is less than one centimeter.

4. Cut the fabric to a suitable size, select a long side of the fabric, and fold the raw edge inward.

5. Wrap the bottle body with cloth, pay attention to the reverse side outward when wrapping, so that the long side of the wide sewing is towards the flat bottom, and the section of the raw edge is towards the mouth of the bottle.

6. Fold a section of the raw edge of the fabric to prevent it from falling off.

7. After the edge of the cloth is folded, use a needle and thread to sew a circle along the small hole just tied.

8. After sewing the fabric on the edge of the bottle mouth, turn the whole fabric up to the front.

9. Make a small opening on each side of the seam, and use a hairpin to pass through the handbag rope from the opening.

Ways to turn waste into treasure:Change your own attributes. As the saying goes, if this "waste" is reasonably processed, transformed, split or reorganized, it may release the potential use value and become a treasure.

The most typical example is petroleum – freshly mined oil is a mixture of hydrocarbons, black, sticky, and useless – but after layers of sock distillation and vacuum distillation, a variety of gasoline, diesel, lubricating oil, aviation gasoline, polyethylene ...... can be obtainedEven the remaining residue is the main raw material for the production of candles and asphalt.

The practice of turning waste into treasure is as follows:

1. Clean eraser with brush: dig 2 shallow small round holes at one end of the eraser, remove the tip of the waste brush, wash and dry. Disposable masks turn waste into treasure.

Cut off the brush head and turn it into a small brush 100 simple scrap handmade small crafts. Insert the tip of the brush into a small round hole in the eraser and glue it firmly.

In this way, a clean eraser is made. Whenever you finish wiping the eraser, you can use a brush to gently "sweep" the debris from the paper and pour it into the wastebasket.

Second, multi-functional storage box: put Guangming, Yili, or Mengniu. A full carton of milk.

After drinking, don't throw away any of the small boxes. Don't throw away big boxes. Put the large box and lay it horizontally.

Don't cut it all around, cut the top three sides open, like the lid of a small box, and don't cut the big side. The small box inside, the top is cut off and put back into the big box. A multi-purpose storage compartment is complete.

3. Starry sky lamp: cut the tin foil to the size of just enough to fit into a glass jar, and draw a dot matrix diagram of each constellation with a pen on the back of the tin foil. Then use an awl or a sharp needle to poke it out on the tin foil according to the constellation lattice.

Roll the tin foil and stick the ends with transparent glue to make a tin foil cylinder with constellations engraved on it.

4. Carefully put the tin foil cylinder into a glass jar or jar, and then put in a small LED wall lamp with a button battery. If you don't have an LED wall light, you can try to open an opening from the bottom of the jar, then light a small candle on the glass bottle cap, and put the glass jar with tin foil upside down to cover the cap upside down, and you can make a starry sky candle lamp.

Plug in the power, close the bottle and you're done with a handmade starry sky lamp.

Turning waste into treasure to make small table lamps is as follows:Material preparation: scissors, paper cups, brushes, tape.

2. Use an oil-based pen to draw patterns in the cut cup, or you can write.

3. Glue the bracket and base of the lampshade and lamp together.

4. Put the painted cup on top and finish.

Here's how to turn trash into treasure:

1. Make a pen holder from a plastic bottle, prepare an empty water bottle, cut two halves with a knife, then cut the edge with scissors, press down the cut part, and the pen holder is ready.

2. Make an airplane with plastic bottles and colored paper, cut out the shape of the wings and windows with colored paper, glue the wings to the plastic bottle and bottle, and glue the small square windows, and the plane is ready.

3. Make a villain toy in a waste paper box, cut out the express box with scissors and make a support rod for the swing, fix the support rod with tape, and then fix the cut villain shape on the swing with glue tape.

Turn trash into treasure

1. This exhibition introduces the classification and treatment process and results of three typical types of garbage: e-waste, plastics, and Tetra Pak through the exhibition board and physical model.

2. It mainly introduces the garbage treatment process, and the physical model introduces the garbage classification and treatment from the three stages of waste - recycled raw materials - recycled products, and the process of turning waste into treasure. <>

3. Milk carton packaging is separated into pulp, plastic and aluminum powder through the process of pulping and pulping, and pulp can be used to make recycled paper products, and plastic particles can be used to make fibers, spinning and weaving threads and then further make clothes.

4. Aluminum powder is used as a tool for the production of aircraft cannons or daily necessities. For every 1 ton of milk cartons, 510 kg of paper can be made, 120 kg of plastic, and 28 kg of aluminum powder can be refined.