-
Don't worry about a clogged toilet? Just a plastic bottle, teach you a quick dredging method, save money and trouble, great life tips, life tips, I hope to help everyone, solve the troubles, thank you.
-
1. Plastic wrap. If the toilet at home is blocked, you can use plastic wrap to completely cover the toilet bowl and close to the edge, then press the button of the toilet flush, wait until the toilet slowly bulges to a certain height, gently flatten it down with your hand, and the blocked toilet can be dredged, which is very simple and trouble-free 2. Baking soda + white vinegar. Place the baking soda and white vinegar as per 1:
1 ratio, pour into the toilet bowl and soak for about 15 minutes. After 15 minutes, pour a pot of hot water into the toilet, close the toilet lid and leave it for a while, and the toilet will dredge itself. Because the reaction between the two will produce carbon dioxide gas, the resulting air pressure can be used to unclog the sewer.
3. Detergent + hot water. Pour some dish soap into the toilet, pour hot water, and then use a leather pin to break down the grease that clogs the toilet bowl, just like dissolving the grease in a kitchen sink. Hot water is used to activate the dish soap and enhance the dissolving effect.
After a while, press the flush switch, and the clogged toilet will naturally be unblocked.
-
If it is caused by soft materials such as rags, women's paper, rags, etc., you must go to a hardware store or supermarket to buy special toilet tools to dredge. This tool is very simple to use, just face the toilet mouth with one end and squeeze it down forcefully to unclog the toilet bowl through pressure.
2. Flush and dredge.
If the toilet paper is causing a blockage, it is relatively easy to deal with it by boiling a pot of boiling water, then pouring it into the toilet and waiting for some time for the toilet paper to soften and decompose. After the breakdown is done, rinse it with a bucket of clean water, so that the problem of toilet blockage is solved.
-
If it is a blockage of soft substances, we don't need to worry, we can pour hot boiling water into the toilet, soften the blockage in the water pipe, and let it soak for a while. When it softens, we can see that the sewage is gradually receding, and we can wash it with a large bucket of water. Or use a special toilet unclogging tool or wire agitation, through the principle of pressure, basically can solve this blockage.
-
How to unblock a clogged toilet quickly? It's easy to do this way, saving you money and time.
-
The toilet bowl is plugged in the drain hole and twitches up and down.
Detergent: Soak for 10 minutes and then pour hot water, use with toilet stopper. White vinegar baking soda:
Pour into the toilet bowl after mixing. Plastic wrap: Wrap the toilet bowl and press the plastic wrap layer to push the air into the water.
Sewer unclogging agent: refer to the instruction manual. Ask a professional to come to your door to dredge.
Nowadays, many hotels, public toilets, and even many families use toilets as toilets, because it can make people more comfortable when solving physiological problems, and it is extremely friendly to some people who are unwell. Although the toilet is good, experienced friends should know that the toilet is easy to block.
If you have exhausted all the above methods and failed to unclog the toilet, then you can only pay a certain amount of money to let a professional dredge person come to unclog the toilet.
-
Clogged toilets are a nuisance that everyone will inevitably encounter. After the toilet brush was covered with a plastic bag, we poked the toilet drain with the toilet brush. The principle of pressure is used to unblock the toilet bowl by draining the blockage in the toilet bowl out of the pipe.
After the toilet is unclogged, we press the toilet flush button again. We can see that the toilet has been dredged and drains smoothly, which solves a lot of troubles in the family. It's just that you should always pay attention when operating, don't get it on yourself, otherwise the picture will be too beautiful.
The simpler ones can be dredged directly with dredging agents, so I rarely do it myself, I use more cloud killing toilet dredging agents, and professional things are left to professional people to do, so that it is more efficient.
-
Buy a bottle of toilet spirit in the supermarket, this is corrosive, you need to be careful, first introduce hot water into the squatting toilet, and then introduce liquid, the amount of introduction needs to read the instructions. After the last half hour, use the leather tiger of method 1 to suction the toilet!
-
To unclog the toilet, you only need two chopsticks to quickly solve the blockage of the toilet.
-
Pour vinegar into the toilet bowl and soak for half an hour, then pour in caustic soda or small soda to soak, and then use a toilet bowl pump or a Mashutong device.
-
Usually dredge the toilet, suck with a special suction, or pour it into the toilet with Ronghuaji, about 30 minutes, and then rinse it with boiling water.
-
Method 1: Use a leather puff or strip of cloth to mop.
If you have a leather puff at home, you can try it a few times, and if you don't have a leather puff, use a cloth strip mop. First find a way to get Sho as far down as possible, then put the mop in the toilet bowl and do a piston movement up and down like a leather piston. It'll be through in a moment!
The reason is estimated to be that the mop enters the water, and after it spreads out, it seems to form a pressure surface when it passes downward, and it is pressed inward, so it is passed!
Note: If there is not much water in the toilet, you can add some boiling water, the effect is better!
Method 2: Large Coke bottles.
There is no leather pouch at home, and there is no cloth mop, so you can find a large Coke bottle and cut it near the bottom. Then, like using a leather pin, aim at the pipe mouth, press down from top to bottom, and press it a few more times to dredge!
Note: Be sure to close the cap.
-
If the bidet toilet in the toilet at home is blocked due to the long-term mixing and sticking of soft substances in the pipe after long-term normal use, then the easiest way is to prepare a bucket full of water, and then flush it into the toilet at one time to see if the material that is stuck in the pipe and causes the blockage can be flushed away or flushed away through the force of a large amount of water. If it works, you can flush it several times, so that you can basically flush the clogged soft mixture in the pipe, so that the toilet will be unclogged.
-
1.Cover the toilet bowl with plastic wrap to achieve the effect of sealing, and it is best to wrap more than two layers so that we can be strong enough when pressing, 2Turn on the flush switch and press the plastic wrap on the toilet mouth.
-
Here's how to unclog the toilet bowl:
1. Baking soda and white vinegar flush the toilet, everyone knows that baking soda and white vinegar have an obvious effect on removing oil stains, in fact, flushing the toilet is also very effective. The method is to mix an appropriate amount of white vinegar with an appropriate amount of baking soda in a container, and wait until a large amount of foam appears to pour it into the toilet, because both baking soda and white vinegar have a certain corrosiveness.
Therefore, the baking soda white vinegar solution needs to be soaked in the toilet bowl for a period of time, and after soaking for five or six hours, it is basically OK, at this time, you need to flush it with water several times, and the blockage can basically be flushed out.
2. Use a toilet stopper, which is a more laborious method, first need to fill the toilet with water, then stretch the toilet stopper into the toilet pipe, squeeze it hard into the depth of the toilet pipe, squeeze it several times, until you feel a little squeezed, and then pull out the toilet plug violently, the speed must be fast.
If you hear the sound of pumping water at this time, then the toilet is opened, if there is no movement, then you need to do it again, and you can open it several times.
3. Use a relatively thin bendable wire to stretch into the toilet pipe and poke it repeatedly, so that the blockage can be broken up or passed down repeatedly, and you can poke a few times to flush the water, so repeatedly until you feel the sound of running water.
If you encounter a particularly difficult passage, you can add some caustic soda to the toilet water, caustic soda is an alkaline chemical, corrosive is relatively strong, after soaking in the toilet for a period of time, caustic soda will also play a role, corroding the blockage in the toilet.
However, because caustic soda is relatively corrosive, you must be careful when operating, never use ** contact, and do not get too close to the toilet with your face.
-
Empty plastic bottles can be used to unclog toilets. Empty plastic bottles can use negative pressure to push all the dirt that clogs the toilet into the sewer pipe, thus playing a role in dredging, and the following are the specific steps:
Tools needed: empty plastic bottles, scissors.
1. First, take an empty plastic bottle and cut it along the middle with scissors.
2. Next, use the cut end to plug it into the drain.
3. After plugging into the drain, push hard so that the blockage can be pushed into the sewer pipe.
4. Finally, rinse with water.
5. In this way, the toilet will be dredged.
Notes:1. Be careful not to throw away toilet paper and other garbage in the toilet to prevent clogging.
2. After the above operations are completed, remember to wash your hands and pay attention to hygiene.
-
The easiest and most effective way to open the toilet is to use a pressure pump.
1. Prepare a toilet brush and 2 white plastic bags, these two materials are basically available at home, and they do not cost money and save costs.
2. The head of the toilet brush begins to be wrapped in a plastic bag, pay attention to be sure to bring some strength, the tighter the winding, the better, and try to ensure that the wrapped bag will not leak.
3. Poke the tied toilet brush into it in the direction shown in the figure below, and try a few more times to get through, it should be noted that there must be water in the toilet, this method is to use the principle of the pressure valve, so that the pressure in the pipe suddenly increases and achieves the purpose of flushing away the blockage.
How to unclog the toilet bowl with plastic wrap
First of all, cover the plastic wrap on the surface of the toilet, try to bend it to form a film layer with good sealing, and you can wrap two more layers if you are not at ease; Then, press the flush button of the toilet, if the sealing is good, you will see the plastic wrap layer bulging, if it is not good, it will not bulge, so try to seal it well.
Finally, press the plastic wrap with the palm of your hand, press down hard, be careful not to press through the plastic wrap, and press a few more times, and you will probably be able to unclog the toilet.
How to unclog the toilet with wire
If a hard object such as a key causes a blockage, you should buy iron wire from a hardware store, and then put the wire into the toilet bowl to stir it, so that the hard object can be dredged through physical action. If it is a relatively large hard object, you need to find a professional to solve it.
-
1. Prepare a large bucket, fill the bucket with water, pour it all into the toilet bowl at one time, and use the momentum of the water to flush the toothbrush down; 2. Fill the toilet with water, then use the toilet to suction the flush port, pump a few times, and wash the toothbrush out; 3. Find a professional sewer maintenance personnel, use professional tools to dredge the sewer, and easily solve the blockage problem.
1. The indoor toilet is blocked, the mop that can be used must be the kind with the dun cloth, use the dun cloth to block the drain of the toilet, and then add water to the toilet until the dun cloth is submerged, and then press down the dun cloth with force, so that it can enter the toilet sewer, and then quickly lift the dun cloth, do it a few more times, and you can suck things out.
2. Buy a relatively long plastic water pipe, connect one end of the water pipe to the faucet, and the other end is plugged into the drain of the toilet, and use rags to block the drain, then open the faucet, let the water flow into the drain, and use the water pressure to achieve the purpose of dredging the drain.
3. The use of manual dredge can also solve the problem of toilet blockage, and the manual dredge is not expensive, you can buy it for a few yuan. If none of the above methods can solve the problem, then it is best to ask a professional construction master to dredge the toilet as soon as possible, so as not to affect the normal use in the later stage.
-
The dredging method is as follows:
1.You can find a half-inch wide bamboo strip and put it into the toilet to dredge it, which can solve the problem.
2.You can make the toilet flush more often, and it will be cleared by itself, especially if it is a soluble or breakable item such as dirt or paper. If it is greasy, then rinse a basin of boiling water to melt it. Half a lemon may not go down well.
3.Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet. After ten minutes, everything will be cleared.
4.Find a property they have the responsibility and obligation to help you.
5.Use an appropriate amount of oxalic acid (you can usually use oxalic acid to clean the toilet, just neutralize with the urine alkali to make the toilet unblocked). The effect on lemons should also be ideal.
6.The kind of old-fashioned mop fills the toilet bowl with half of the spike wide water, and then uses the mop to press the hole a few times, moving quickly, relying on pressure to get it through.
7.You pour half of the water into it, use a round mop, or a round-tipped soft brush, and aim it at the hole in the sewer and poke it hard.
8.Go to the grocery store and buy a simple toilet. The plastic one is only 2 yuan. Fill the toilet with water, then use the toilet bowl to target the mouth of the toilet bowl and pump it a few times. It is made by using its air pressure.
9.The ultimate solution is to find a professional who unclogs the pipes to unclog the toilet imitation lead.
Do it yourself, a bucket of glass glue 5 15 yuan to solve the problem, pry the toilet up, get the clogged things out, and then aim at the drain to put down the toilet, take the glass glue to glue, pay attention to the process of sticking the toilet There should be no water and dirt on the floor and toilet, otherwise it will not stick tightly.
What should I do if my toilet is clogged with poop? An easy way to help you unclog the toilet quickly.
1 Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and feel that the glaze and the feel of the body are very delicate, this indicates that the quality of the toilet is better. >>>More
1. Before choosing a toilet on the market, first determine the size of the water in the seat (i.e., the distance from wall to wall). Before installation, please make sure that the product accessories you choose, completed, please carefully review this manual and learn about some products. >>>More
Here's how to adjust it:
1. You can increase the amount of water, such as putting bottles in the water tank. >>>More