What to do if the white wall is moldy

The beauty of the wall is the key to the aesthetics of the interior, and many families will paint the wall into a large white wall, not only for the interior to be more environmentally friendly, but also to make the interior look more spacious and bright. But the white wall also has disadvantages, that is, it is easy to appear moldy, what should I do if the white wall at home is moldy? Don't re-brush it, teach you a few tricks to solve it easily.

Tools Raw materials.

Alcohol, 84 disinfectant, bleaching powder, mold remover.

Method steps.

1 4 Step by Step Reading.

Use alcohol or 84 disinfectant to treat moldy walls.

If the mold on the wall is not serious, first use a brush or dry rag to remove the mildew on the wall, and it must be a dry brush or rag, otherwise it will easily lead to more serious mold on the wall. Once you have brushed the mold on the wall, wipe the wall with a towel dipped in alcohol.

Use bleaching powder.

If there is a lot of mildew, you can wipe it clean with alcohol, use bleach powder with water, the ratio of bleach powder to water is 1:99, and spray the bleach powder mixed with good water on the moldy wall.

Use a mold remover.

MEIBOSS mold remover can completely kill and quickly decompose the mold generated on the surface of the white wall within a few minutes, restore the original color of the wall within 1-5 minutes, restore the moldy wall to its original state without damaging the wall, and inhibit the regeneration of mildew for a long time.

Do a good job of waterproofing and moisture-proof walls.

Our wall mold is because the wall at home is not waterproof, moisture-proof, or the wall has water seepage, so we can paint a layer of waterproof paint on the wall after cleaning the mold on the wall, so as to prevent the wall from mold again. In addition, we should always open windows in our homes for ventilation.

Frequent ventilation, white tile walls or white plaster walls.

What should I do if my walls are moldy?

1. If the area of mold is not large and the mold is presented as some small dots, rather than one by one, then it is recommended to use a small brush to brush off the mildew spots on the wall. After painting, you should also pay more attention to the ventilation of the house, otherwise the white wall will still be moldy. 2. You can use a hair dryer to blow, preferably with hot air.

Drying the mold on the wall can fade or eliminate the mold marks. 3. If the moldy area of the white wall is too large, then it is recommended to re-paint it comprehensively. It is best to ventilate for a while before painting, and wait until the moldy parts are dry before repainting.

Reasons for this:

1. It is likely that the location of the house is not so sunny, and the ventilation of the house is not often maintained. Especially in some renovated houses that no one lives in all year round, such houses are often not breathable, and it is easy to have moldy walls.

2. It is also possible that the insulation of the dry wall of the house is not done well, which will lead to cold penetration.

3. It may also be due to the aging or damage of the pipes inside the house. Because the pipes surround the whole house, once the pipes are aging, then there will be dripping or leaking. Then the whole house will be damp, and the wall skin will be easily moldy.