My neighbor s internet is fast and mine is slow, what s going on, we use a router with 4 megabytes

Restart your computer when you're done. 2 The cat has been left open for a long time, it is very hot and hot, it is recommended to place the cat in a ventilated place as much as possible, and do not overlap with the router. So as not to be too high, otherwise there will be a fake crash, restart the cat is better, it is really not good It is recommended to change a cat with good performance (I hit ** to telecom, free to change).

3 Several computers share the network, because the router is too poor, others use P2P to watch movies, etc., it will drag the router to death, restart the router will be better, the long-term solution is to change to a better enterprise-level router. 4. Change the IP address to static settings to avoid slow computer startup, and after the IP lease expires, the sub-configuration will not be able to IP, and the network will be disconnected. 5 If someone has installed and used rate-limiting software on the network, it is recommended that you enable the ARP firewall (360 has ARP protection).

6 It is recommended to manage the boot startup items and stop the useless startup items, especially those who look at the **, ** software, run in the background at boot, and account for the network speed. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off. You can also use 360 and other software to intelligently optimize boot acceleration.

7 It is recommended to install only one main antivirus software, installing more than one will occupy the computer's resources, which will make the computer slower and the Internet will feel slow. Hope it helps!! I don't understand hi I !!

I can teach you to analyze and solve the problem step by step!!

It's miserable to have the same router with people.,A ** thing from others.,You're on the Internet as if you didn't have the Internet.。。 It is recommended not to link the same route with others, as each is not beneficial. You can also change the bandwidth, how to change it, check it, and find it. Change the bandwidth that was originally limited to zero.

Hopefully, thank you.

Do you have a primary router and a secondary router.

The two routers are set up differently.

1. How to set up the main router:

1. Plug the network cable (bus) into the WAN port of the wireless router, plug one end of the network cable into any LAN port of the wireless router and connect the computer network card at the other end, and turn on the power supply of the router.

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the wireless router setting interface, select the Internet access method according to the setup wizard (different broadband options are also different), and enter the Internet access account and password.

5. Save and continue to set the wireless key, (it is recommended to use a combination of numbers and English for the password, and it is best to use the @ symbol in the middle, so as to prevent others from rubbing the net).

6. After saving, you can surf the Internet normally.

7. If it is abnormal, you may wish to click the reset button of the wireless router and set up the router again.

Second, the setting method of the secondary router:

1. Do not connect the secondary router to the main router first.

2. One end of the network cable is connected to any LAN port of the router, and the other end is connected to the computer.

3. Change the LAN port IP of the login interface through the computer browser to avoid conflicts with the IP segment of the main router;

4. WAN port Internet access mode selection: dynamic IP connection, enable DHCP server.

5. Set the account and key wirelessly, save and log out.

6. Connect a network cable from any LAN port of the main router to the WAN port of the wireless router, and the computer can access the Internet at this time.

This is the receiving and sending bytes, you can't see the network speed, test the network speed, there is a speed test platform on the Internet.

This is just the amount of packets sent and received, you can't see the network speed, the easiest thing is to enter the router or the management interface of the modem, see how much the uplink and downlink of the network is, and ping the DNS address of the local network operator to see the latency.

This is not visible, you need to enter the speed test** to take the speed test.

The computer system, network cable, etc. will affect the network speed, so you can only check them one by one.

There are many reasons why a good copy can cause you to be in this situation:

1. It depends on what kind of broadband you use when you use du, if it is from the Great Wall, it depends on the number of users of the unit you are in.

2. Is the neighbor at home at noon? If it uses P2P technology software like Thunderbolt, it will cause your internet speed to drop.

3. It is the peak period of the network, and the network speed will be very slow at this time.

4. If this happened in a recent period of time, it was caused by other official reasons such as network upgrades!

1.Someone restricts the traffic you copy (no one else has gone online in the morning, so you are fast, and others will automatically limit your traffic as soon as they go online, which is slow, such as P2P, Jusheng network management and other software can be controlled)!

2.Your broadband traffic itself is relatively small, and you can use it very quickly when others are not online, and your network speed will slow down when people go online and take up part of the traffic!

These two possibilities are the kind of ones you can see for yourself!

1. If the length of the network cable exceeds the data transmission range, it will affect the speed (depending on the quality of the network cable, the poor network cable is 50 meters, and the good network cable is 120 meters).

2.Routers generally don't affect the speed of the network, and in my experience, routers either can't implement autodialing (so this can be ruled out).

3.The computer setup problem is more complicated, see if there is a process in your system tasks that is not in use, such as P2P, as long as it is started, even if you don't use it, it will also occupy network resources.

Another point is not knowing what your network is? Telecommunications? Netcom? Trillions. There is a difference between household and commercial use.

1. Maybe your neighbor has recently played some big games and used a lot of bandwidth. 2. It is also possible that the remaining space of the C drive in your computer is too small, and there is some garbage that needs to be cleaned up.

If there is a problem with the network cable, it is basically that you can't connect to the network, upgrade the router, or see if there is a mobile phone nearby, a microwave oven and other machines that just wrap around the signal, you can set it on the computer, and change the default limit of 20% of the network speed to 0