Which is the best textbook for fire engineers?

Hello, glad to answer for you :

Candidates preparing for the first-level fire engineer exam are recommended to start with the two books of "Fire Safety Technology Practice" and "Fire Safety Technology Comprehensive Ability", because the practice and comprehensive ability are relatively involved in more basic content, and the difficulty of the exam is slightly lower.

Characteristics of the three subjects.

2. Comprehensive ability: It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis: It is all about the practical application of real knives and guns, which is more difficult, and must be learned after technical practice and comprehensive ability to learn, not only because there are cases, but after some basic understanding of fire protection, you will also feel that this subject is particularly interesting.

I hope it helps you and I wish you all the best in preparing for the exam.

In 2021, the new edition of the textbook for first-class fire engineers has been published, and the review and preparation are mainly based on the new version of the textbook. The new version of the textbook has changed a lot compared with the old version of the textbook.

The content of the 2021 edition of the textbook has been updated a lot, but the difficulty of the exam will not change much, and it is roughly the same as in previous years.

The change rate of Fire Safety Technical Practice is about 30%, and almost every article has varying degrees of change. The change ratio of "Comprehensive Capacity of Fire Safety Technology" is about 15%, and the "Civil Code", "Regulations on Fire Safety Management of High-rise Civil Buildings", "Technical Appraisal of Fire Protection Products", "Compulsory Product Certification Implementation Rules" for fire alarms, fire extinguishers, and evacuation and escape products, and the relevant content of the "Notice of the Ministry of Emergency Management on Implementing the Newly Revised Fire Protection Law of the People's Republic of China and Fully Implementing the Management of Fire Safety Inspection and Notification Commitments Before Public Gathering Places Are Put into Use". The relevant content of building fireproof sealing inspection has been added. The change rate of the "Fire Safety Case Analysis" is about 35%, and the focus is on newly added case content, such as fire prevention case studies of elderly care facilities, large commercial complexes, and foam fire extinguishing systems.

The textbooks selected by fire engineers must be officially published and the best, that is, the three official textbooks published by the Chinese Personnel Publishing House. Comprehensive capabilities and case studies.

The latest edition of the textbook in 2012 was published by China Planning Press, so you must buy the textbook from China Planning Press. I passed the fire exam in 2018 once, and I have the latest electronic version of the textbook. Link.

The only official textbook for fire engineers must be recognized as being published by China Planning Publishing House, and only this edition is compiled by experts from the Fire and Rescue Bureau of the Ministry of Emergency Management, which is the most authoritative and comprehensive for new fire regulations, policy documents and technical standards.

1. High demand.

In the next few years, we need nearly 500,000 talents with fire engineer qualifications, as long as every industry involves the fire protection agency units, there are vacancies for relevant talents. According to the survey, there are only about 200,000 people who have this certificate, so the loophole in this position is still quite large for the society.

2. The difficulty is relatively small.

After all, this certificate is an examination project introduced in recent years, and the difficulty of the exam questions is not very high, and many of the questions are some very new knowledge points, and there are not many accumulation of questions in previous years like some old certificates, and the threshold of the certificate is not too high.

3. The welfare is better.

In the related industry, and passed the assessment of the fire engineer, then the face is not only the salary has improved, but also means that the choice of career has also expanded, for example, you can be engaged in fire project manager, electrical engineer and other more technical positions.

Among the people who passed the exam, the proportion of candidates with an annual salary of less than 100,000 yuan is not high, estimated at about 20%; Candidates with an annual salary of 10-200,000 yuan should be the main force, accounting for about 50%. Candidates with an annual salary of more than 200,000 yuan account for about 30%.

There are three officially designated textbooks + examination syllabus, namely "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability", "Fire Safety Case Analysis" and "Registered Fire Engineer Qualification Examination Syllabus".

The 2021 edition of the "Tutorial Textbook for the Qualification Examination of Registered Fire Engineers" compiled by relevant experts organized by the Fire and Rescue Bureau of the Ministry of Emergency Management includes the "Registered Fire Engineer Qualification Examination Syllabus", "Fire Safety Technical Practice" (Volume I and II), "Comprehensive Ability of Fire Safety Technology" (Volume I and II), and "Fire Safety Case Analysis", with a full set of 6 volumes.

Registered Fire Engineer Qualification Examination Tutorial Textbook" will be exclusively published by China Planning Press.

At present, the only official textbook for fire engineers in 2022 has been released, and it will be available for purchase soon! However, it should be noted that it is published by China Planning Publishing House, and only this edition is organized and compiled by the Fire and Rescue Bureau of the Ministry of Emergency Management (that is, the organizer of the fire certificate examination), which is the most authoritative and comprehensive for new fire regulations, policy documents and technical standards! Follow the plan and don't get lost!

The "Tutorial Textbook for the Qualification Examination of Registered Fire Engineers", organized and compiled by the Fire and Rescue Bureau of the Ministry of Emergency Management and published by China Planning Press, will be revised soon.

This revision clarifies this textbook.

At the same time, the content of the textbook will be clearly defined in accordance with the examination syllabus and scope of the first-level fire engineer and the second-level fire engineer, so as to facilitate candidates to learn according to their needs. In addition, according to the recent changes in laws, regulations, standards and policies, as well as the feedback from candidates, the content of the 2021 edition will be supplemented, improved and revised as a whole, so as to be closer to the actual work needs and facilitate candidates to prepare for the exam.

At present, there are three designated textbooks for registered fire fighters published by the Machinery Industry Press, which are practice, technical synthesis and cases, with a total of more than 1,000 pages.

3 books, "Fire Safety Technical Practice", "Fire Safety Case Analysis", "Fire Safety Safety Technology Comprehensive Ability".

Application conditions for first-class fire engineer:

1) Obtain a college degree in fire protection engineering, and work for 6 years, including 4 years in fire safety technology; Or obtain a college degree in fire protection engineering or related majors, and work for 7 years, including 5 years in fire safety technology.

2) Obtain a bachelor's degree or degree in fire protection engineering, and work for 4 years, including 3 years in fire safety technology; Or obtain a bachelor's degree in fire protection engineering or related majors, and work for 5 years, including 4 years in fire safety technology.

3) Obtain a double bachelor's degree or graduate degree including fire protection engineering, and work for 3 years, including 2 years in fire safety technology; Or obtain a double bachelor's degree or graduate degree in fire protection engineering related majors, and work for 4 years, including 3 years in fire safety technology.

4) Obtain a master's degree or degree in fire protection engineering, and work for 2 years, including 1 year in fire safety technology; Or obtain a master's degree or degree in fire protection engineering related majors, and have worked for at least 3 years, including 2 years in fire safety technology.

5) Obtain a doctor's degree or degree in fire protection engineering, and have been engaged in fire safety technology for 1 year; Or obtain a doctoral degree or degree in fire protection engineering or related majors, and have been engaged in fire safety technology for at least 2 years.

6) For those who have obtained the corresponding academic qualifications or degrees in other majors, their working years and the working years in fire safety technology will be increased by 1 year.

Registration conditions for the qualification examination of second-class registered fire engineers:

1. Obtained a technical secondary school degree in fire protection engineering, and has been engaged in fire safety technology for 3 years; Or obtain a technical secondary school degree in fire protection engineering related majors, and have been engaged in fire safety technology for 4 years.

2. Obtained a college degree in fire protection engineering, and has been engaged in fire safety technology for 2 years; Or obtain a college degree in fire protection engineering or related majors, and have been engaged in fire safety technology for 3 years.

3. Obtain a bachelor's degree or degree in fire protection engineering, and have been engaged in fire safety technology for 1 year; Or obtain a bachelor's degree or degree in fire protection engineering or related majors, and have been engaged in fire safety technology for at least 2 years.

4. For those who have obtained the corresponding academic qualifications or degrees in other majors, the number of years of work in fire safety technology will be increased by 1 year.

"Registered fire engineer" refers to the professional and technical personnel engaged in fire safety technical work such as fire technical consultation, fire safety assessment, fire safety management, fire safety technical training, fire protection facility testing, fire accident technical analysis, fire protection facility maintenance, fire safety monitoring, fire safety inspection, etc., after obtaining the corresponding level of fire protection engineer qualification certificate through examination and registering in accordance with the law.

1) Fundamentals of "Technical Practice".

It mainly involves combustion foundation, building fire protection, fire protection facilities, fire protection of other buildings, and fire safety assessment.

Mainly focusing on the basic concepts, basic principles, classification and composition, fire extinguishing mechanism, selection and application and related design requirements, it is the most basic entry-level course for the fire engineer examination.

Lay the foundation for learning for "Comprehensive" and "Case". Novices can start with this textbook to fully understand the content of fire protection, and can have a big concept of fire protection from this book.

2) "Comprehensive Ability".

It mainly involves laws and regulations and professional ethics, building fire protection, fire protection facilities, fire safety management, and fire safety assessment. It is mainly aimed at fire prevention inspection, construction acceptance of fire protection facilities, fire detection, fault analysis, maintenance and fire safety management. It is an extension of technical practice, mainly to explain the actual operation experience such as inspection, commissioning, acceptance, etc., there will be a lot of small skills, which is very easy for candidates with practical work experience, and for novices, they need to combine technical practice to learn together.

The characteristics of synthesis are that it involves the specific application of the system, and there are many examination items that need to be memorized, which is a memorize subject.

3) Case Study

It is the integration and application of the first two subjects, and the degree of quality of the first two subjects directly determines the passing of this subject. Fundamentally, this textbook does not need to be studied separately, but the textbook has a super advantage, which is to give an architectural scene or a model, which aspects we should analyze and give a clear learning direction.

1) There is a huge demand for talents.

According to the Ministry of Public Security Fire Bureau, in the next 3 to 5 years, China needs nearly 500,000 registered fire engineers, a wide range of demand, all walks of life, all important fire protection responsibilities of the unit and related intermediaries, all need to be equipped with a corresponding number of fire engineers to obtain qualifications.

2) There are many positions and high salaries.

Registered fire engineers can be engaged in business managers, project managers, fire protection engineers, budget officers, fire engineering project managers, water and electricity engineers, fire protection constructors, constructors, fire protection project managers, fire engineering budget officers, mechanical and electrical engineers, safety directors, safety consultants, etc.

3) The employment situation is good.

Fire engineer is the only one in the country that can be registered to the age of 70 access class certificate, according to the survey of the north including Yinqi, Shanghai, Guangzhou and other first-tier cities affiliated costs are considerable, now.

Second- and third-tier cities are also gradually understanding and implementing, and if you do a full-time job, it is a transformation in many friends' lives.

To take the fire engineering sail skater exam, you need learning materials such as exam syllabus, textbooks, past question sets, and knowledge point summaries. There are three textbooks required for the fire engineer examination, namely "Fire Safety Technical Practice", "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis".

To take the first-level fire engineer examination, you need to read the three sets of textbooks "Fire Safety Technical Practice", "Fire Safety Case Analysis" and "Comprehensive Ability of Fire Safety Technology". These three sets of textbooks are rich in relevant knowledge and cover the key content of the exam.

The three textbooks introduced above are a set of tutorial textbooks commissioned by the Fire Protection Bureau of the Ministry of Public Security and compiled by the China Fire Protection Association, which are applicable to the qualification examination of level 12. Among the several sets of textbooks, "Fire Safety Technical Practice" is the foundation, which mainly includes basic concepts, basic principles and classification, and fire extinguishing principles. "Comprehensive Ability of Fire Safety Technology" mainly involves the content of laws and regulations and professional ethics, and "Fire Safety Case Analysis" is the integration and application of the first two, and the actual situation of the first two determines the passing of this subject.

1. First of all, the content of the first-class fire engineer exam is relatively simple, but the test center is very extensive, basically covering the content of the entire textbook, which requires the candidate to be very familiar with the textbook, at least read it twice, in order to be familiar with the textbook.

2. Secondly, when reading the textbook, pay attention to taking notes on the key content, and take notes on the content that you don't quite understand or difficult to understand when reading, so that you can jump out of the textbook and review the notes directly when you review after reading the book, so as to deepen your impression and understanding.

3. Again, after the foundation has been laid, at this time, you must decide whether you need to learn the fire engineering course of online courses according to your actual situation. Although some candidates prefer self-study, the efficiency of self-study is slower than that of having an online teacher. And if you have procrastination, I'm afraid it's better to find a more executive method, so it is especially recommended to dredge the overall structure of knowledge points through online classes** to deepen understanding and memory.

4. Finally, to review the first-level fire engineer exam, you should carefully practice doing questions, including past real questions and mock questions, and record the questions you did wrong in a notebook, so that you can review them repeatedly when you are close to the exam in a peaceful manner, so as to deepen your impression and avoid making the same mistakes. At the same time, in the process of review, on the one hand, we should pay attention to the integration of the whole textbook and thoroughly understand the content, and on the other hand, we should develop the logical thinking of reading and reviewing the questions, and avoid multiple choices, fewer choices and missing selections.