Samsung G3508 flashed how to recover

Flashing the machine can not restore the previous data, unless the previous data has been backed up, the following is to use the flashing wizard to flash the method to expand (the flashing wizard operation is relatively simple):

How to do it Steps:

1. First open the flash wizard, the flash wizard will automatically install the flash wizard mobile phone driver, to ensure that the phone is turned on the debugging mode, so that the phone remains in a normal boot state, and the data cable is connected to the computer, 2. Then find the rom area of the mobile phone model, select the rom package you want to flash, click **, 3, after selecting the corresponding rom package, wait for the rom package**good, find the **good rom package in the **management interface, click the one-key flash button, 4, click the flash button, Start flashing, 5, the flashing process will be the mobile phone equipment inspection and the flashing package to check, to prevent a parasite, 6, the next device into the automatic flashing mode, it takes 5-15 minutes, this is based on the performance of the mobile phone to decide, after the completion of the flashing prompt success.

Samsung mobile phones are mainly divided into two types of flashing methods, one is the line brushing method, and the other is the card brushing method. 1. Line brush method. The mainstream flashing method on Samsung mobile phones, connect to the computer through the mobile phone, and complete the flashing on the computer, and the ROM package is usually in tar format.

This method is popular because it is simple and reliable. 2. Card swiping method. This method is to flash directly through the mobile phone, which can flash the ROM, beautify the package, baseband, and kernel.

The usual ROM package format is ZIP. 2. Preparation for Samsung mobile phone flashing If you choose the line brushing method, please prepare: 1. Samsung mobile phone driver.

**After unzipping, please do not do anything else yet. 3. ROM bag. The ROM package is "read-only memory", which is commonly known as the mobile phone hard disk that has been written by the ROM developer, and the user can flash in and read, and a large number of ROMs are provided in the Android Chinese network**.

Hello and welcome to the Samsung Digital Services platform.

Hello !

According to your description, the problem after factory reset of your Samsung Galaxy Trend3 G3508 phone does not have to be flashed, it is recommended to try it as follows:

When the device is fully charged, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing so, restart and you're done.

If the problem persists after 2-wipes, it is recommended to press and hold the [Power Button] and [Volume +] buttons for 10 seconds to enter the downloading mode

Connect to your PC and flash the official ROM repair system of your model G3508.

Hope this helps you!!

The system is lost and the computer is re-flashed.

It is recommended that you take it to Samsung Electronics after-sales service to the technician to help you deal with it.

This one is in the factory reset, you can wait and see.

Hello: According to your description, the method of factory resetting this phone is as follows: Settings - Account - Reset - Factory Reset Blind shirt is good.

Precautions: 1. Keep the battery full of > 50%.

2. Before restoring factory settings, please back up the personal information in your phone, such as: **book, text messages, call logs, memos, etc.

3. Do not forcibly cut off the power during the factory reset process.

According to your description, the appearance of a smartphone malfunction can be influenced by a lot of factors. If there is a conflict with third-party software, viruses, or excessive cache usage, it will cause automatic restart. It is recommended that you try the following:

1.Replace the battery to try, or send it to a service center for testing2Uninstall recently installed third-party software to preliminarily eliminate the cause of system software conflicts.

3.After removing the external SD card, test whether there is still reboot phenomenon4Back up your phone's data (**book, text messages, **, etc.), and factory reset your phone (go to phone settings - reset privacy - private - factory reset).

I'm also Samsung, it's always automatically shut down, automatically restart, and I won't use Samsung in the future, and the domestic machine recommends the hammer phone.

Hello dear Samsung users:

According to your description, a factory reset will erase all data from your phone's internal storage, including text messages, contacts, apps, and more. Therefore, before you do a factory reset of your phone, please back up the useful data from your pure selling phone to avoid loss. To do a factory reset, follow these steps:

1.Under the Standby page, tap Applications.

2.Click Settings.

3.Select Reset.

4.Tap Factory reset. Buried tape.

Samsung knows that to provide you with high-quality solutions, to answer your questions attentively, and hope that the bent pants can get your satisfactory evaluation.