What should I do if my Samsung I9001 phone fails to flash?

Hello, due to the risks of flashing, such as mobile phone problems caused by self-flashing, it may also affect the repair, so it is not recommended that you flash the phone by yourself. If there is a problem with the phone due to flashing the phone by itself, it is recommended that you send the machine to the Samsung after-sales service center for an engineer to help check and deal with it.

Samsung i9001 mobile phone flashing failed to re-flash tutorial: If your mobile phone fails to flash and can't turn on, you can follow the following tutorial to re-flash: 1. Open and select the best ROM; 2. The mobile phone selects the flashing mode to connect to the computer, press start to start the brush, and so on, and the flashing fails or is stuck, at this time, do not use the flashing software, the mobile phone directly unplugs the data cable, removes the battery and then installs and then boots, the mobile phone appears ** and the computer connection icon, at this time, the mobile phone is plugged into the data cable, it will prompt to connect the mobile phone, and then press start to start the brush, so that you can re-flash the phone.

If your Samsung i9001 mobile phone can't enter the flash mode because of the failure to flash, you can refer to the following operations: 1. **, and then unzip it to the root directory of your system disk; 2. Open the command prompt cmd, if it is a win7 system, click start - all programs - accessories - command prompt - right click, run as administrator, if your system disk is c disk, open the command prompt and enter cd c: enter; 3. Then enter the command cd tools enter the tools directory and then enter the command adb devices and press enter, if it is normal, you can see your phone's **, after your phone's driver ** appears; 4. Finally, after entering the command adb reboot download, the phone will automatically reboot into flash mode, at this time, you can open the flashing software, and flash the package to flash again.

Samsung i9001 flashing failed solution:

1.If the situation is better, you can go to recovery: re-brush, or change to another brush.

2.The situation is severe and it is impossible to enter Recovery. You need the official RSD cable flash package and kernel, enter fastboot, use the cable brush to re-flash the official system, and then re-flash the third-party recovery (the same steps as the first flash).

3.The situation deteriorated, the phone did not respond and could not be turned on. This is the standard brick machine.

Don't worry, it may be that the battery is dead, use the universal charger to fully charge the battery. Or replace the battery. As long as you plug in the computer and there is a response, you will be saved.

Wait for the battery to be fully charged, then enter fastboot, use the wire brush to reflash the official system, and then reflash the third-party recovery (the same as the first flash).

No.

There are two kinds of brick machines, real bricks and fake bricks.

Fake bricks: It is a system problem, software, and it is more common when it is swiped. Generally, there is a problem with the flashing package, and after brushing the phone, it can't be turned on.

Or accidentally run out of power when swiping, resulting in unfinished brushing, it will also crash and can't be turned on, but you can generally enter the recovery interface, even if you can't enter the recovery interface, you can also save the phone by line brushing.

Real bricks: Hardware problems, that is, the content of the chip at the lowest level of the system is damaged when the line is brushed, and it is hopeless at this time.

Pay attention to the flashing machine, the line brush is closer to the bottom layer of the system, and the card brush is secondary, so it is recommended to use the card brush, the line brush is easier to become a real brick than the card brush!! (In any case, the probability of becoming a brick is extremely low.) At least I didn't see the phone being wiped out)

You can brush it again according to the original method in this case, if the original method can't be used, please go to the forum to search for the Android phone to brush the brick tutorial, good luck, visual inspection of your character should not be so bad, according to the fake brick treatment.

It is better to ask this kind of question in the forum, where there are masters.