-
Win7 system does not come with all the hardware drivers, so when reinstalling the system, it is best to have your own graphics card, network card and other hardware drivers, and then install the drivers one by one through the device manager after installing the system.
-
If the system disk is faulty, it is recommended to reinstall it.
-
If the message says that the driver cannot be found, it may be because your computer does not have some driver software installed, or your computer does not have an optical drive.
-
Go to Bois and press the left and right arrow keys to move to Options"boot", press the up and down arrow keys to move to the second option, change UEFI FIRST to Legacy FIRST, press F10 to save, and it should be installed successfully.
Principle: Replace UEFI boot with MBR boot.
PS: This issue should only occur on Win732-bit and XP and previous systems.
Pure hand-hitting, give it a thumbs up.
-
After using the optical drive to load the image,Open the setup program to install it,You don't need a USB flash drive (remember to plug it in),Unless it's a downgrade But as long as the image file is written to the USB flash drive,You don't need to choose like the landlord。 As shown in Fig.1:
Whether it's win7 or win8, it's pretty much the same.,If the landlord doesn't understand, feel free to contact me.。
-
After making the boot USB flash drive for installing win7,Put the win7 installation image file,Use the virtual optical drive to restore,And then the restored installation files,Copy all to that boot USB flash drive,Then use this USB flash drive to install,There will be no prompt that the driver cannot be found。 I have verified.
-
I'm having the same issue. In the end, I found out that it was due to a lack of drivers. There is no problem with the interface to install it.
-
The previous step is not to choose not to install the driver directly to install it, I remember,I never had this interface when I installed it.。
-
Yesterday I got it for a day and finally installed it successfully -
-
You don't need to choose to install a driver, you can install the system directly, the system contains the necessary drivers for Windows, and there is no problem with normal use
-
It is a question of which software to make a USB flash drive system. Just change the production software.
-
Install the system first; After installing the next driver wizard, what less driver is it, just install it yourself!
-
Is your problem solved? I'm also having this problem and would like to find a solution...
-
You can install the driver wizard, which has everything in the driver, and will automatically recognize the latest driver, which is very convenient and fool-proof software.
-
I also encountered the same problem,After the actual test belongs to the U disk model is different,I first use eaget8gU disk to install win732-bit system,There will always be no device driver can be found,Do not display the hard disk option,How to install the motherboard driver can't work,Finally, I pressed the kingston T3's U disk,After starting, it entered the installation interface,And the hard disk partition option appeared,Everything is normal,Depressed for 2 days,Finally solve the problem!
-
Just plug in the USB flash drive with another port, don't plug it in (don't plug in the blue one).
-
Your U disk has not yet made a boot item, first of all, you have to make the U disk into a boot U disk, you can only do that hard disk installation, directly boot the system and then install.
-
Try the interface position of the U disk, I also have this situation when I plug the U disk in, just plug it in!
-
I feel that there is no problem with your USB flash drive, it seems to be a problem with your notebook. Try a different U port?
-
If the original computer system is win10,win8 so,Then this problem may occur when installing win7,This motherboard chip is caused,If the notebook,You can ask the manufacturer's customer service to solve,Probably to install the driver that supports win7,It's troublesome,You can also install the ghost version directly (not recommended)。 The method of answering upstairs may not necessarily work, but it can be tried.
There are many netizens in the home of Windows 7, among which there is no shortage of local tyrant netizens who buy Apple's Mac, and Mac uses Mac OS. Although the Mac OS system is strong, Microsoft's operating system has made the Chinese people accustomed to it, and it feels like the Win7 system is still grounded. Therefore, many Mac users want to install the computer as a win7 system, this article brings how to install win7 system with a USB flash drive to serve these tyrant friends. >>>More
The "Error 651" displayed on broadband Internet access is mainly caused by the failure to connect the user's terminal computer with the Netcom central office equipment, which is generally divided into five situations: "network cable failure", "modem failure", "network card failure", "modem itself setting", and "network operator problem". Here's how to deal with such cases: >>>More
It shows that the SSD hard disk is not partitioned, and there is generally a partition tool when installing the win7 system, first partition and format the hard disk, and then install the system. >>>More
The premise of my method is that the C drive of your original machine is very large, and later the C disk has become smaller because of the reinstallation of the system!! >>>More
1. Install XP with Ghost and install it on the C drive;
2、Install win7 in the XP system,Don't use the ghost method,The next Microsoft original,Honestly install step by step,Pay attention to install the system with a non-C disk,Such as a D disk。 >>>More