As soon as the computer is turned on, the blue screen error code ox0000007b is displayed

0x0000007b

This ** has something to do with the hard disk, but don't be afraid, it's not a bad sector, it's a setting problem or a virus that causes the hard disk boot partition error.

If you have this problem when installing the system with the original system disk, it means that your machine configuration is still relatively new, as an old system disk, you don't recognize such a new hard disk interface, so you have to enter the BIOS to change the hard disk mode to IDE compatibility mode. Of course, people now use the ghost version of the operating system, and the newer ghost disk does not have this problem.

If your operating system has been used for a while, and suddenly this problem occurs one day, then sorry, caused by the virus, press F8 on boot, select the last correct configuration, and if you can't restore the normal mode, then please redo the system.

If you are changing to a new motherboard, you have to reinstall the system with PE, because the original system and the new motherboard are not bridged, resulting in a blue screen.

0x0000007b: Inacessible Boot DeviceWindows is unable to access the system partition or boot volume during boot process, which may be caused by viruses or hard drive damage.

1. Antivirus. Unplug the network connection, turn off System Restore, and use the latest version of antivirus software to kill the virus in safe mode, and it is best to change to another antivirus software to kill again.

2. Boot the computer with the installation CD, and then perform the repair installation.

3. Restart your computer. At the boot screen, press F8 to enter "Advanced Boot Options" and select "Last Correct Configuration".

Fourth, it doesn't work, install the hard disk into another computer, and then use it"chkdskr"to check and fix disk errors.

The specific steps to solve the blue screen **ox0000007b on boot are as follows:

1. Restart the computer first, and press the shortcut key F1, F2 or Del to enter the BIOS startup item setting interface when the boot screen appears.

2. Then move the cursor to "Advanced" through the left and right arrow keys on the keyboard in the pop-up window, then press the up and down arrow keys to select "SATA Configuration", and press the Enter key to confirm;

3. Then a mode selection window will pop up, here we move the cursor by moving the cursor up and down the arrow keys to select the "ahci" mode, and then press the enter key to execute.

The reason for the blue screen **ox0000007b on boot may be caused by a system error, and the specific steps to solve it are as follows:

1. First turn on the computer, use the win+r shortcut key in the computer to open the running window, and enter the msconfig command enter.

2. In the pop-up system settings window, switch to the Services tab, select "Hide all Microsoft services", and then click Disable All.

3. Then switch to the "Startup" bar, click "Open Task Manager" in the pop-up interface, click Startup Items, then click Disable, click OK and restart the system to solve the problem of blue screen **ox0000007b at boot.

There is a blue screen when booting up**ox0000007b, there are the following solutions:

1. Install computer protection software, check the security of the system frequently, and repair it in time.

2. Restart your computer, if this screen appears again, follow the steps below.

3. Work to remove any newly installed drivers or driver controllers, check the hard drive to make sure it is properly configured and terminated. Run Chakdsk f to verify the corruption on the hard drive and then restart the computer.

4. Press and hold the win+r key on the keyboard to jump out of the running window, enter, enter.

5. Open Device Manager.

6. Find the graphics card, right-click on the device - properties - driver - rollback driver.

7. Disk self-test: Right-click the Disk Partition Properties tool.

8. Tools - error correction - start checking.

9. After investigation, the reason for the error of this blue screen is:**: 0x0000007b, reason: file name, directory name or storage volume label syntax error.

Blue Screen** 0x0000007b solution.

If you changed msconfig, this will do:

Power on press F8-Repair Computer-Command Prompt, and enter bcdedit deletevalue truncatememory

Execute the bcdedit command (remove the default startup memory settings), noting the spaces and curly braces.