How to change the system of Samsung notebook R423?

Hello: If you use a USB flash drive to install the operating system, the method is as follows:

1.Press the F2 button to enter the BIOS settings when the computer is turned on, find the Advanced option, turn off the Fast Start BIOS Mode function, and press the F10 key to save and exit. When inserting a USB flash drive and restarting, press the F10 key or ESC key to enter the quick boot settings, and select the USB flash drive to boot up.

2.Use a third-party U disk production software to make a U disk boot disk, and **genuine system image or pure version of the image,**Unzip and find the file package (file suffix: ISO), and copy it to the root directory of the U disk).

3.Insert the U disk and boot it into Windows PE, and use a third-party restoration software to restore the image file to the C disk.

Welcome to Samsung's Digital Services platform.

Samsung notebooks can be installed in the system by following the steps below:

1.First, buy a system disk and put the system disc into the optical drive.

2.Turn on the power and then observe the on-screen prompt to press "F2" for BIOS settings before booting the system.

3.Set the startup mode. Find the boot option, there is the first boot, generally 1st boot device, move the cursor to it, press the enter key to go in and select the item with the word ***, press the enter key to confirm.

4.Some of the key methods for moving the cursor are the arrow keys of the keyboard, and some are f5 and f6, which are prompted by the screen. Then press F10, select Yes, press Enter to confirm, and then the computer will automatically restart.

5.At this time, boot from the disc when starting, enter the installation system interface, follow the system prompts, step by step, and the installation process will be restarted many times.

Go to the BIOS menu as well as change the first driver mode to cdrow

This seems to have a ** tutorial.,It's recommended that you find it.,Otherwise, it's too unsafe to dismantle it yourself.。

Find the fixed latch of the keyboard and push the latch in the surrounding direction, and gently lift the keyboard. Check the position of the bayonet and gently eject the bayonet in the correct direction, which is the position of the bayonet.

Find the other three mounts on the same side and eject them in the same way.

The last bayonet on the long side. Also take it out in the same way.

Nudge the keyboard up to lift the letter keys along the edges.

It's here to disassemble the keyboard and finish.

You'd better think about it carefully before you do it

**There are tutorials.