How do I paste in Excel in the auto filter state?

1.First, select the menu bar, click: 'Filter', then click on the number column drop-down triangle and select 'Number Filter'.

2.Select: Less than or equal to the window to open.

Fill in the number: 40

Click: 'OK'.

Screening complete. 3.After filtering, there are 22 rows of data symbol requirements, start copy-pasting.

Select the filtered data and press the shortcut key: "Alt+; You can quickly locate and select the cell value. Then right-click and select: "Copy" or press the shortcut key: 'Ctrl+C' to copy the cell.

4.Then in the newly opened worksheet, place the mouse in the first cell, right-click and select: "Paste" or press the shortcut key: "Ctrl+V" to paste the data.

The data displayed after pasting is the filtered value.

5.The other is to select the filtered cells, click: "Find & Select" --Positioning Criteria --Visible Cells". Click: 'OK'.

Then copy and paste.

Auto-filtering is sure to hide some cells, and if you post something here, it will definitely do.

If you don't need to process the results of your auto-filter, we recommend that you do it like this:

1.Copy the results of the auto-filter.

2.Create a new worksheet.

3.In the newly created worksheet, right-click, select Paste Special, and then select a value to paste.

4.Then paste the content you want to copy (column f in Table 1).

The above practice is actually to remove the hidden cells in the autofilter.

I suggest you pay attention to "Paste Select" in the future, this thing is very useful, hehe.

Hope it helps!

You'll need to add two secondary columns to do this (you can delete them when you're done).

1. Add the first auxiliary column: Before filtering, use the fill handle to add a column with the same number of series as the row number in the blank column at the back.

2. Perform screening operations.

3. Add a second auxiliary column: select the range of the same row as the blank column and the filter result, enter 1, and press CTRL+Enter. In this case, all the rows of the filtered results are 1, and the rows that are not the filtered results are blank.

4. Cancel the filter, and sort the whole table by the last column. At this point, your filtering results will be concentrated at the front of the table (the last column has a row of 1).

5. Select the data range you want to copy, click "Copy", right-click in the target cell, click "Paste Special", select "Value", and click "OK".

6. Sort the whole table by the penultimate column (the content is the same number of series as the row number).

7. Delete the last two columns.

Is that okay?

1. First of all, open Excel**, and the data cells have been filtered in **.

2. Then select the cells that need to be copied and pasted in another Excel** and press Ctrl+C to copy the operation.

3. Then select the cell range you need to paste and click "Find & Select" in the toolbar to select "Positioning".

4. You can locate the selected cell area.

5. At this time, press Ctrl+V or right-click the mouse button to select Paste Value to paste the copied data into the visible cell.

1. First, create a new data file in the desired location on the computer itself.

2. Fill in the original data in the file.

3. Select the header row of the data table, find [Sort & Filter] in the ribbon of the table, click to open and find [Filter], after clicking, the title item of the table will be in the Filter state.

4. Select the desired filter items, filter out the required data, click [OK], and the required data will be displayed.

5. Select all the data you want to copy, and find [Find & Select] in the functional area of the table''Click to enter, and then find [Targeting].''Then click to enter.

6. Enter the positioning options interface, find "[Visible Cell]", select and click the "Confirm" button below.

7. At this time, you will find that you have only copied the data you need.

1. First of all, in the computer, open an excel**, as shown in the figure below.

2. Then in the Excel** page that opens, click [Filter] in the upper right corner, as shown in the figure below.

3. Then in the open filter window, configure the filter conditions and click [OK], as shown in the following figure.

4. Then select the filtered data, right-click, and select [Copy].

5. Finally, in the new work, right-click and select [Paste] to complete.

The implementation method and detailed operation steps are as follows:

1. First, use the mouse to select the filtered entries, as shown in the figure below, and then proceed to the next step.

2. Secondly, after completing the above steps, find the "Find & Select" option in the toolbar, and then pop up the drop-down menu, select the "Targeting" option as shown in the image below, and then enter the next step.

3. Then, after completing the above steps, find the "Visible Cells" option among it and click it as below screenshot shown, and then proceed to the next step.

4. Then, after completing the above steps, click "OK", you can see the excel sheet changes to the interface as shown in the picture below, and then enter the next step.

5. Finally, after completing the above steps, use the mouse to select the items you want to copy, right-click, then select the option you want to copy, and then paste them, as shown in the figure below. In this way, the problem is solved.

You insert a column after l, and then the column is fully populated as 1, and then unfilter, sort the column as 1, and then copy it without a problem.

Press alt+; key to select the content you filtered, then copy and paste. You try.

Cause: The function of locating visible cells is not used, resulting in the content of cells hidden after filtering for hail disturbances also pasted.

Solution:

1. Enter a set of data in Excel** and filter the group of data.

2. Select the filtered data cells, and click "Targeting" in "Find and Select" in the "Start" tab.

3. Select the positioning visible cell in the open dialog moderation box.

4. Then use the copy operation to copy the visible cells and paste them to the new cell position, then only the filtered content can be pasted.

1. We select the test path of column F "three networks", and copy this item to column l remarks, first copy the data, select all the data that needs to be copied in the column, and click copy or CTR+C by email;

1) Hold down Ctrl+;

2) Press and hold F5

3) Select, search, and target conditions.

Here are the steps to select F5 and targeting, if it's Ctrl+; Then you can paste it directly into the following column;

3. Select "Visible Cell" in the positioning condition, and the operation of the visible area in the visible cell format is visible;

4. Then right-click in the first row under the remarks column and select the letter to paste, and paste the data in the visible area;

5. Finally, all the data after pasting is copied to the remarks column, and there is no missing row of data.

Pre-Match Exam Materials:

Encyclopedia - Microsoft Office Excel Encyclopedia - Autoslide Bi Dynamic Filter.

When using excel, you will need to use the skills of copying and pasting after screening, if you don't know how to use the skills of copying and pasting after screening, you may wish to study and learn together, the following is the method of copying and pasting after filtering the excel** data shared by me, for everyone to read and learn.

Excel** data filtering and copy-pasting method1.Let's take a simple ** as an example to illustrate the situation where the copy-paste data loses the correspondence in the filtered state. The following chart shows an employee completion rate**, which needs to be listed separately on the right side with a completion rate of more than 80%.

If you have a lot of data, you need to use filtering.

2.Select the source data that needs to be filtered, that is, all the data in the Task Completion Rate column, and then click on the menu above"data"-"Filtering", then click on the inverted triangle (i.e., the filter marker) to the right of the task completion rate, and click in its drop-down menu"Data filtering"—"Greater than", such as a circle search map.

4.In this way, the required data will be filtered out, copied and pasted into the ** on the right, and the pasted data will be found to be incomplete.

5.After the filter is removed, it is found that the pasted data is complete, but the original correspondence is lost.

How to solve this situation?

1.After the user filters out the data they need, they use the formula method to realize the data correspondence. That is, enter "=" in ** on the right, and then click the corresponding data (here is 108%), and press Enter.

2.In this way, you will get the corresponding data, and then place the mouse in the lower right corner of the cell where the formula is located, and when the "+" is displayed, pull down to copy the formula.

3.After the filter status is removed, you can find that the data on the right is not only completely consistent with the filtered data, but also saves the original correspondence.

How to copy and paste excel data after filtering.

Excel** The method of copying data after filtering.

Excel**How to copy and paste the results after filtering.

Tutorial for copying excel data after filtering.

Excel2007 How to copy and paste data after filtering.

excel how to copy and paste filtered cells.

Tutorial for data replication after excel filtering.

How to copy the content after the content is filtered?

var _hmt = hmt ||function()