How to fill in the self assessment report of safety standardization construction

There is no fixed format, and the basic structure is as follows:

Page 1. Cover; Page 2 Introduction (a brief summary of the documents and aspects of the work carried out by the enterprise); Page 3 I. Company profile (date of establishment, assets or capacity, number of employees, number of safety workers and development of the enterprise from beginning to present). 2. Safety production management and performance (from the enterprise's safety production policy and objectives as the entry point combined with the results achieved in safety.

Implement responsibilities, strengthen hidden danger investigation, pay attention to training, strengthen personnel management, strengthen equipment management, and so on. This section will be detailed in the key sections. 3. Project review (1.)

Whether the business meets the level to be achieved. 2.How is the self-inspection of the benchmarking).

Fourth, the main problems and rectification suggestions (1.)The nonconformities will be put forward according to the standards. 2.

List the suggestions and methods for rectifying nonconforming items, the rectification period, and the person in charge in the form of **). 5. On-site review conclusion (summarize experience from the above aspects of work, and finally decide which level you can achieve). 6. Attached table (safety production standardization organization, score schedule, actual score table of benchmarking items).

The above is my personal opinion, I don't know if it will help you. Because the standards required by different industries are also different, just for reference!

I don't know if I can do it for you.,Refer to it.,I'm a set**.,It's different to send to this version.,It's not**Embodyed.,Understand.。

Serial No. On-site review content On-site review review opinions.

1. The main person in charge of the enterprise shall pass the training assessment and obtain the training certificate of the main person in charge (within the validity period);

2. The enterprise shall set up a safety director in accordance with the requirements of the Municipal No. X document, and clarify the relevant responsibilities of the safety director, and appoint a safety director or safety management personnel in accordance with the relevant requirements;

3. The company's safety production training records for employees must cover 100% of all employees of the enterprise;

4. Enterprises must establish and improve the hidden danger investigation record files, and submit the hidden danger investigation and management report to the local safety production supervision and management department according to the regulations;

5. The enterprise shall sign the "Safety Production Responsibility Letter" with the local town (street) or village (residence);

6. The production site and warehouse of the enterprise are clean and tidy, the on-site safety warning signs are complete, and all kinds of equipment, facilities and materials are in a standardized and effective safety management state;

7. The safety management of major hazards, major hazardous processes and equipment of the enterprise shall meet the basic requirements of relevant national safety regulations and standards;

8. The occupational health conditions such as dust, exhaust gas, and noise in the workplace of the enterprise meet the basic requirements of the relevant national occupational health standards;

9. The emergency rescue plan for production safety accidents of the enterprise has been demonstrated, reviewed and recorded, and relevant emergency rescue drills have been organized and recorded, and there are drill records.

10. Problems and rectification opinions in the creation of safety production standardization:

According to the application of the enterprise, our unit in accordance with the standard, the enterprise safety production standardization to create a standard work for on-site review, after review, that the enterprise has reached the standard specified in the standard, it is recommended that the superior safety production supervision and management department to be approved and announced.

Signature of the review member or seal of the unit:

YYYYYYYYYYYYYYYYY

Dear, hello, fill in the self-assessment of safety production standardization I. Enterprise profile.

2. Self-inspection and self-evaluation of safety production standardization activities 1, strengthen leadership and launch 2, self-inspection and rectification are implemented item by item.

3. 230 points for basic management of self-examination and self-assessment, xx points will be deducted from Bisou trembling, and xx points will be obtained; 600 points for equipment and facilities, 355 points for deducting xx points; 170 points for occupational health in the working environment, xx points will be deducted, and xx points will be regretted; A total of xx points will be deducted, and the self-assessment score will be xx points. Fourth, there are problems 1, because the enterprise is in a new unit, so there are some new personnel, new equipment, lack of basic knowledge and management experience accumulation. 2. Individual employees do not have a strong sense of safety production, and the phenomenon of "three violations" still exists in individual positions, so strengthening safety production education and strengthening management is still the work we have to do.

3. Due to the lack of learning and understanding of the standards, coupled with the short time for penetration, we still have a lot of work to do on some specific issues.

Summary. The self-assessment opinion of the self-assessment agency can directly state: in accordance with the requirements of the assessment standards, the self-assessment is in accordance with the regulations.

The enterprise establishes a self-assessment agency, conducts self-assessment in accordance with the requirements of the evaluation standards, and forms a self-assessment report. The enterprise self-assessment can invite professional technical service organizations to provide support. According to the results of the self-assessment, the enterprise shall submit a written review application after being approved by the corresponding safety production supervision and management department (hereinafter referred to as the safety supervision department).

If the application requirements are met, the relevant review unit shall be notified to organize the review; If the application requirements are not met, the applicant shall be notified in writing and the reasons shall be explained. If the application is accepted by the review organization unit, the review organization unit shall conduct a preliminary review of the application and report to the safety supervision department of the audit announcement for approval before notifying the relevant review unit to organize the review.

How to write the self-assessment opinions of the self-assessment agency on the monthly self-assessment form of safety production standardization of construction projects.

The self-assessment opinion of the self-assessment agency can directly state: in accordance with the requirements of the assessment standards, the self-assessment is in accordance with the regulations. The enterprise establishes a self-assessment agency, conducts self-assessment in accordance with the requirements of the evaluation standards, and forms a self-assessment report.

Enterprise self-assessment can invite professional and technical service agencies to provide support. According to the results of the self-assessment, the enterprise shall submit a written review application after being approved by the corresponding safety production supervision and management department (hereinafter referred to as the safety supervision department). If the requirements of the disturbance application are met, the relevant review unit shall be notified to organize the review; If the application requirements are not met, the applicant shall be notified in writing and the reasons shall be explained.

If the application is accepted by the review organization unit, the review organization unit shall conduct a preliminary review of the application and report to the safety supervision department of the audit announcement for approval before notifying the relevant review unit to organize the review.

Extended information: The relevant requirements for the standardization of safety production slag stipulate: 1. All functional departments of the enterprise should timely identify Dong Xinheng and obtain the laws, regulations, standards and specifications of safety production applicable to the department, and track and master the revision of relevant laws, regulations, standards and specifications.

2. The enterprise shall evaluate the work of safety production standardization carried out by the enterprise in accordance with this standard and relevant scoring rules; Apply for external review and grading after self-assessment. 3. The enterprise should revise the safety production management rules and regulations and operating procedures according to the evaluation situation, safety inspection feedback problems, production safety accident cases, performance evaluation results, etc., to ensure that they are effective and applicable, and to ensure that the latest effective version is used for each position.

Summary. What requirements should be met on the basis of self-assessment of safety production standardization?

The above is a relevant information, for your reference.