How to take the ISO series quality certification exam? Thank you for more information!

Find a training provider to sign up for the training and then take the auditor exam, and then you can do it, and there will be one every once in a while.

Summary. The analysis is as follows: 1. Basic requirements:

1) Education: college degree or above; (2) Work experience: at least four years of work experience in technical or managerial positions; (3) Quality experience:

At least two years of work experience related to quality management; (4) Formal training: Successfully complete the quality management system auditor training course confirmed by the China Certification and Accreditation Association and obtain the "Training Certificate" through evaluation. 2. Examination Procedure:

1) You can participate in the national unified examination every quarter of the year, the examination is divided into two parts, the basic knowledge part and the audit knowledge part, each with a full score of 100 points, and a score of more than 70 points is passed, and both parts are qualified for passing the examination. (2) With the above certificates, you can apply for registration with the National Certification and Accreditation Association through the corresponding certification body, and you can become an intern auditor after approval.

How to get a 9001 quality management system certifier.

The analysis is as follows: 1. Basic requirements: (1) Education:

College degree or above; (2) Work experience: at least four years of work experience in technical or managerial positions; (3) Quality experience: at least two years of work experience related to quality management; (4) Formal training:

Successfully completed the quality management system auditor training course confirmed by the China Certification and Accreditation Association and obtained the "Training Certificate" through the evaluation. 2. Examination procedures: (1) You can participate in the national unified examination every quarter of the year, the examination is two parts, the basic knowledge part and the audit knowledge part, each with a full score of 100 points, and more than 70 points are qualified, and both parts are qualified for passing the examination.

(2) With the above certificates, you can apply for registration with the National Certification and Accreditation Association through the corresponding certification body, and you can become an intern auditor after approval.

1. Trainee auditors are suitable for: all original registered auditors who wish to become full-time auditors or wish to temporarily stop audit activities or transfer from audit positions to management positions The requirements involve: personal quality, education, professional and technical ability 2. Auditors are suitable for:

The requirements for the members of the audit team involve: the ability to carry out audits as a team member 3, the chief auditor is suitable for: the audit team leader, especially those who work in the certification body or carry out the supplier audit for large enterprises The requirements involve:

The ability to manage and lead the audit team 4, the chief auditor is suitable for: (in the form of an independent group) the audit activities alone, experienced auditors The requirements involve: have the experience and ability requirements of any of the following auditors Enterprise consulting background, with the ability to implement the management system and engage in system audit activities The background of the chief auditor, with the ability to audit management and lead the audit team.

1.The supplier confirms that its quality system meets the specified quality system requirements. In the case of a contract, the supplier shall confirm to the specific customer that its quality system meets the quality system requirements specified in the contract.

In the case of third-party certification, the supplier shall confirm to the certification body that its quality system meets the requirements of the applied quality assurance model.

2.In the case of a contract, it serves as a quality assurance agreement between the customer and the supplier. In the contract, when the customer's requirements for the supplier's quality system are appropriate, one of the three models can be directly quoted; If necessary, it can also be tailored appropriately on the basis of a model or supplemented by request.

Which model to use in the contract and how to tailor and supplement should be negotiated between the customer and the supplier, and an agreement should be reached on the basis of mutual benefit. After the contract is signed, the cited quality assurance model standards and the requirements for tailoring and supplementing will be used as the basis for the customer's audit of the supplier's quality system.

3.It is used as a criterion for the pre-contract evaluation of the supplier's quality and malpractice system (in the case of the second party's identification or registration). Before signing a contract, the customer often needs to evaluate the supplier's quality system to determine that the supplier has the ability to meet the technical requirements of the products they order.

Prior to the assessment, the parties should agree on which quality assurance standard to use and, if necessary, additional requirements as the criteria for the assessment (or determination).

4.As a basis for third-party certification. In the case of third-party quality system certification, the supplier and the certification body should agree on which quality assurance standard to use as the certification criterion.

The chosen model should be suitable for the needs of the technical requirements of the product covered and not mislead the supplier's customers. For example, if an organization has a design function, and the products covered by Shenfanlu system certification are designed by the organization's self-judgment, it is particularly important to choose GB1 T19001-ISO9001 or GB1 T19002-ISO9002. When the design quality is particularly important to the formation of product quality, and it is difficult to fully verify the product inspection and testing, GB1 T19001-ISO9001 should be selected.

Friend, I have been doing ISO TS for nearly ten years, and I have never heard that the quality system certification certificate is examined, and the certificate will be issued only after being audited by a qualified third-party certification body.

Our company has recently started the TS16949 course. It will be November 25-27. Interested parties can be contacted.

TS16949 quality system certification certificate is not tested! TS16949 quality system internal auditor certificate is the test! Friends in Guangdong Province can go to the company to get the training exam!

Should I apply for certification or take the auditor certificate?

First, about 16949 certification.

16949 is an abbreviation for a quality management certification system for the automotive industry. The full name is ISO TS16949:2009, which is actually a technical specification for the international automotive industry, which is designed based on ISO9001 and added to the technical specifications of the automotive industry.

This specification is completely consistent with ISO9000:2008, but focuses more on defect prevention and reducing quality fluctuations and waste that are easy to occur in the automotive parts chain. The specificity and applicability of the ISO TS16949 standard is very clear, and it only applies to automotive OEMs and their direct spare parts manufacturers, which means that these manufacturers must be directly related to the production of automobiles, can carry out processing and manufacturing activities, and through such activities, can add value to the products.

Second, the scope of application of 16949 certification The technical specification of 16949 combines ISO9001:2000 to describe the quality system requirements for the design, development, production, installation and service of automobile-related products. ISO TS 16949 applies to suppliers and subcontractors who provide production and service parts for the following items:"Scene"：

Parts or materials. Heat treatment parts, painting, plating, or other final processing services. Other customer-specified products.