The phone screen is out of order. It doesn t work even after rebooting. I will also keep restarting

Many friends' machines are parallel goods, is the merchant's brush system, many merchants should not have double clear before flashing, so there will be screen failure, automatic restart, error, unexpected stop shutdown and other problems, so if there are friends with the above problems.

I suggest (just suggest) that you flash into the new system after double clearing:

Step 1, Double Clearing, Teleport.

Step 2, Flash, Teleport.

Step 3: Double clear again.

In order to brush the machine without problems and be safe, develop a good habit of double cleaning before and after brushing. The first boot is slow, and it's best to turn it off immediately after booting up. Just reboot it.

I hope it can help you and I wish you a happy life!

If you are using a Huawei phone.

If the touch screen fails on your phone, you can troubleshoot it by following the steps below:

1.If the ambient temperature of your phone is too low, the touch screen may malfunction, which is affected by the physical characteristics of the screen device itself, and it is recommended that you try to keep your phone at an ambient temperature of 0 -35.

2.If the problem persists, we recommend that you bring your phone to a Huawei Customer Service Center with your proof of purchase.

If you haven't backed up your data before.

There is a risk of data loss at the time of detection.

The common causes of smartphone screen failure and how to fix them are as follows:

1. There is static electricity on the mobile phone screen.

You need to clean the mobile phone screen, and the static electricity of the mobile phone screen may also cause the touch screen to fail, so you only need to gently wipe the entire screen with your hands.

2. Software conflicts or incompatibilities.

You can try pressing the lock screen key back and forth a few more times. In many cases, the phone's touch screen fails because of a slow response caused by software conflicts or incompatibilities, so it is possible to recover by pressing the lock screen button back and forth a few times.

3. There is water on your hands or on the screen of your phone.

Wipe your phone and hands clean of water. Nowadays, most mobile phones support wet water operation, but there are also many mobile phones that will cause the mobile phone operation to fail as long as there are water droplets on the mobile phone screen or the mobile phone has water. If you're not sure if that's the cause, you can wipe your phone's screen clean immediately and see if it's back to normal.

Fourth, the mobile phone is stuck.

Because the mobile phone is stuck, the running memory is too small, etc., the mobile phone screen operation is slow, and it is mistaken for the result of the mobile phone screen failure. At this time, you need to turn off or restart the mobile phone to check whether the mobile phone screen can be used normally.

5. Mobile phone hardware problems.

External force or damage caused by the failure of the mobile phone touch screen, which is generally due to the failure of the mobile phone screen caused by the hardware problem of the mobile phone, in this case, the mobile phone can be sent to repair, try to replace the new mobile phone screen.

Hope it helps.

In this case, you have to go to a professional mobile phone repair to deal with it, it should be a hardware problem.

This is a problem with the mobile phone screen or broken, you can only go to the mobile phone repair shop to let the master show you if there is any value in replacing the screen, if there is value, you can replace the mobile phone screen, if there is no value, you can only replace the new mobile phone, there is no other way.

It should be that the outer screen of the mobile phone is broken. Go to the mobile phone store and change the outer screen of the mobile phone. That is, touchscreen. The touch screen is broken, so it won't respond.

The mobile phone screen fails and there is no response, and there is still no response when the phone is turned off and restarted?

If the touch screen of the mobile phone is not sensitive and malfunctioning, it is recommended that you try the following operations: 1Check if the phone has a film, if there is a suggestion to cancel the screen film and try it. 2.If the touch screen of your phone is completely out of order, it is recommended that you restart it.

Hello, happy with your problem, it is recommended that you go to the nearest repair point to check it.

1. The screen is not sensitive due to the unclean screen: wipe the dirt and water stains on the mobile phone with a clean dust-free cloth;

2. The mobile phone has a film: if the screen fails after confirming whether the film is attached, the film can be removed and then used for comparison or sent to the customer service center to re-apply the film.

3. The screen fails when operating a single software: go to Settings - Application and Permissions More Settings - Application Management Application - (All) - Find the software - Clear cache data; Upgrade the software to the latest version, or uninstall and reinstall it.

4. When charging, the screen is not sensitive: use the original charger to charge the mobile phone or change to a grounded socket to try charging again;

5. Screen failure caused by insufficient running memory: click one key to speed up the cleaning of the background; Restart your phone.

6. If the mobile phone has static electricity and causes the screen to malfunction temporarily, it can be gently wiped with a damp soft cloth;

The phone screen is out of order. Don't be afraid, learn from me and use it for another two years.

1.It is recommended to force restart the phone to see if it can be repaired, [Force Restart Method].

ColorOS or above systems press and hold the power button + volume plus button at the same time for 15 seconds;

ColorOS and below systems press and hold the power button for 10 seconds.

2.Confirm whether the surface of the screen is dirty or has liquid, which makes it impossible to sense touch, if so, wipe the liquid on the screen of the mobile phone with a clean cloth and try to touch it;

3.Whether there is a problem after attaching the protective film, if so, tear off the protective film;

4.If not, if the non-original charger and cable used for charging, or charging under the interfering circuit, may interfere with the touch screen and cause non-function, please replace the original charger and data cable of the mobile phone and try charging in other places;

5.If the mobile phone is rubbed in the pocket and static electricity is generated, causing the touch to fail, if so, it is recommended to try to operate it after a while.

6.If it is still invalid, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing by professional engineers. Before going, please back up and migrate your mobile phone data in advance (the data of the safe and QQ WeChat need to be backed up and migrated separately); If the phone cannot be used normally, the mobile phone data cannot be backed up, and you can recall whether you have migrated the data to other devices or whether you have the function of using cloud services, and if so, you can keep it in advance.

Summary. Hello dear, glad to answer for you!

The answer I have found for you is:

1. The screen is not sensitive due to the unclean screen

Use a clean dust-free cloth to wipe the dirt and water stains on the phone;

2. The mobile phone has a film:

If there is a problem of screen failure after applying the film, you can remove the film and use it again for comparison or send it to the customer service center to reapply the film.

3. The screen fails when operating a single software

Go to Settings - Apps & Permissions More Settings - App Management Apps - (All) - Find the Software - Clear Cache Data; Upgrade the software to the latest version, or uninstall and reinstall it.

4. When charging, the screen is not sensitive:

Use the original charger to charge the phone or change to a grounded socket to try charging again;

5. The screen fails due to insufficient running memory

One-click acceleration to clean up the background; Restart your phone.

6. If the mobile phone has static electricity and causes the screen to malfunction temporarily, it can be gently wiped with a damp soft cloth;

Why did the phone screen suddenly fail, and then it turned off automatically, and then it was fine.

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Hello dear, glad to answer for you! The answer I got for you is: 1. The screen is not sensitive due to the unclean screen

Use a clean dust-free cloth to wipe the dirt and water stains on the phone; 2. There is a film on the mobile phone: whether there is a problem of screen failure after the film, the film can be removed and then used for comparison or sent to the customer service center to re-apply the film. 3. The screen fails when operating a single software

Go to Settings - Apps & Permissions More Settings - App Management Apps - (All) - Find the Software - Clear Cache Data; Upgrade the version of the software to the latest version, or uninstall and reinstall it. 4. When charging, the screen is not sensitive: use the original charger to charge the mobile phone or change to a grounded socket to try charging again; 5. The screen fails due to insufficient running memory

One-click acceleration to clean up the background; Restart your phone. 6. If the mobile phone has static electricity and causes the screen to malfunction temporarily, it can be gently wiped with a damp soft cloth;

Summary. The phone switch fails and sometimes it will automatically restart and then the screen will go black, hello dear, we turn on the phone, and next, we click to open the phone settings.

Next. In the mobile settings interface, we click on the Open Other Settings button.

Next. In the other settings screen, we click on the Open Developer Options button.

Next. In the developer options settings screen, we turned on the switch for automatic system updates.

At last. After we turn on the switch, we click the home button below to return to the desktop of the phone, at this time, our smartphone can be turned on normally.

The phone power off fails, sometimes it will automatically restart and then go black.

The mobile phone power on and off fails, sometimes it will automatically restart and then the screen will go black, hello dear, we turn on the phone, and next, we click to open the phone settings Wang hand. Next, in the mobile settings interface, we click on the Open Other Settings button. Next, in the other settings screen, we click on the Open Developer Options button.

Next, in the developer options settings screen, we will turn on the switch for automatic system updates. Finally, after we turn on the switch, we click the home button at the bottom to return to the desktop of the phone, at this time, our smartphone can be turned on normally. I hope that the sleepy pants are too short to help you.

It's not a problem, it's that the phone will inexplicably go black, and the boot button will fail, sometimes it's good, sometimes it's good.