-
Anonymous users2024-02-07If the win2003 server is configured with a VPN service, if you want to rely on the system firewall to prohibit ping, you must delete the VPN service, otherwise when you start the firewall, it will report an error as shown in the figure Please make sure the background firewall service is enabled Enable the firewall on the local connection Open the control panel -- network connection -- right-click Select Properties Enter the firewall settings as shown in the figure Select Enable Firewall in the General tab Select the settings option of ICMP in the Advanced tab Allow incoming echo requests to check above Remove and then click OK step by step, there is one more small lock for the local connection, no need to restart, it will work immediately, and there is no echo from the outside ping. It's just that the ping doesn't work.
-
Anonymous users2024-02-06Method 1: Command line mode.
Once you're on the server, click Start – Run the Enter command:
netsh firewall set icmpsetting 8 so that it can be pinged externally to the server.
A: It's very simple and practical!
In the same way, if you want to disable ping, you can run the following command:
netsh firewall set icmpsetting 8 disable
Method 2: Firewall Advanced Panel Mode.
1.Go to Control Panel – > Administrative Tools – > find "Advanced Security Windows Firewall".
2.Click Inbound Rules.
3.Locate Echo Request ICMPV4-IN
4.Right-click on the rule and click on "Enable".
The same way to disable ping.
-
Anonymous users2024-02-05netsh firewall set icmpsetting 8 so that you can ping to the server in the external copying department very simple and practical!
The same is true for bai, if you want to disable ping, then run the following command to do it:
netsh firewall set icmpsetting 8 disable
Method 2: Firewall Advanced Panel Way 1Go to Control Panel – > Administrative Tools – > find "Advanced Security Windows Firewall".
2.Click Inbound Rules.
-
Anonymous users2024-02-04Method 1: Command line.
After entering the server in the coming mode, click on it.
Start—bai—run Enter the command: du
netsh firewall set icmpsetting 8 so that you can be outside zhi
-
Anonymous users2024-02-031. Enable the built-in firewall surface of the system or add rules to block or allow ICMP traffic, which seems to be prohibited by default;
2. Some versions of the security software set communication control function can be customized.
Right-and-righteousness rule plane setting;
3. Create a pin icmp traffic IPsec security policy through the set filter operation to allow the implementation of blocking;
Disable or enable ICMP (Inbound Outbound) packets through the Windows built-in firewall.
For detailed instructions, please refer to:
Questions about Windows Server are asked directly by visiting the Microsoft Technet forum
-
Anonymous users2024-02-02No, communication is two-way. Unless you're not connected to the internet.
-
Anonymous users2024-02-01There are two ways to do this:
One is the form of the command line:
Once you're on the server, click Start – Run the Enter command:
Disable ping command: netsh firewall set icmpsetting 8 disable
To enable ping, run the netsh firewall set icmpsetting 8 command
The second is the firewall advanced panel inside the settings:
1.Go to Control Panel – > Administrative Tools – > find "Advanced Security Windows Firewall".
2.Click Inbound Rules.
3.Locate Echo Request ICMPV4-IN
4.Right-click on the rule and click on "Enable".
The same way to disable ping.
-
Anonymous users2024-01-31Method 1: Command line mode.
Once you're on the server, click Start – Run the Enter command:
Netsh Firewall Set ICMPSETTING 8 so you can ping the server externally It's very easy and practical!
In the same way, if you want to disable ping, you can run the following command:
netsh firewall set icmpsetting 8 disable
Method 2: Firewall Advanced Panel Mode.
1.Go to Control Panel – > Administrative Tools – > find "Advanced Security Windows Firewall".
2.Click Inbound Rules.
3.Locate Echo Request ICMPV4-IN
4.Right-click on the rule and click on "Enable".
The same way to disable ping.
-
Anonymous users2024-01-30Method 1: Command line mode.
Once you're on the server, click Start – Run the Enter command:
Netsh Firewall Set ICMPSETTING 8 so you can ping the server externally It's very easy and practical!
In the same way, if you want to disable ping, you can run the following command:
netsh firewall set icmpsetting 8 disable
Method 2: Firewall Advanced Panel Mode.
1.Go to Control Panel – > Administrative Tools – > find "Advanced Security Windows Firewall".
2.Click Inbound Rules.
3.Locate Echo Request ICMPV4-IN
4.Right-click on the rule and click on "Enable".
The same way to disable ping.
With ntbacku, there is a backup of the system state
It's not difficult, the hardware uses a router, the software, and the operating system uses win2003 >>>More
When we talk about web server security, the best advice I can give you is not to be a layman. When hackers start attacking your network, they will first check for general security vulnerabilities before considering more difficult ways to breach your security system. So, for example, when all the data on your server is in a FAT partition, even installing all the security software in the world won't help you much. >>>More
1.At present, foreign bandwidth is cheaper than domestic bandwidth, which is more suitable for enterprise users who expand their business overseas. In addition, foreign servers are exempt from the North Shore, which is more convenient for enterprises to expand their overseas business; >>>More
In the case of a certain hardware configuration of the server, the number of users is too large, which will cause the server load to be too high, if the hardware configuration cannot meet the use, the server configuration can be increased, or the server with a high configuration can be replaced If the bandwidth is small, the bandwidth can be increased Huapu**Xiao Li will answer for you.