What should I do if IWC Watch suddenly stops leaving? Where can it be repaired?

Check whether the core stepper motor can not rotate, check whether the rotor of the magnetic stepper motor adsorbs iron filings and sundries, and cannot rotate when stuck, and check whether there are debris and dust between the gear teeth, which affects the normal operation of the gear train. There is also an excess of core oil, which makes the wheels sticky to the splint. The solution was to wash the mechanical components of the quartz watch.

IWC's watch manufacturing process is very precise, in order to make our IWC watch normal operation and accuracy, you can go to the after-sales service or repair shop for repair and maintenance.

In addition to daily maintenance, once the watch has problems that are difficult to solve, it should be sent to the brand for after-sales service and repair in time. Shanghai Hengshida Watch **** is a long-established national chain of watch service companies. We specialize in the repair of watches from the world's top brands such as Patek Philippe, Vacheron Constantin, IWC, Audemars Piguet, Piaget, Breguet, Zenith, Glashütte, Rolex, Tudor, Omega, Chopard, Longines and other top brands, as well as antique timepieces and custom-made high-end straps, and can provide regular maintenance for your watch.

IWC Watch Repair Center is located in Room 2606, Block B, China Resources Building, Vientiane City, No. 1366 Qianjiang Road, Jianggan District, Hangzhou.

1. Toothpaste restoration.

If there are scratches or scratches on the mirror of the watch, you can first drop one or two drops of water on the mirror surface, and then use a little toothpaste, the abrasive agent in the toothpaste has a repair function, gently coat the surface of the traces, and then use a cotton ball or tablecloth to wipe the scratches repeatedly, pay attention not to wipe in one direction at all, choose more, and wipe in different directions.

That is, the scratches can be removed and the mirror surface is as good as new.

2. Sandpaper repair method.

Another method is sandpaper wiping. You can choose a piece of 1200 sandpaper, which is not easy to damage the mirror, try to use relatively clean pliers when taking the sandpaper, and then, use pliers or other tools to clamp the selected sandpaper, find the texture of the glass surface of the watch, and then wipe gently, when operating, you must pay attention to the steel ring around the watch do not touch, because the sandpaper will damage the watch steel ring.

3. Burning money repair method.

If your watch is a sapphire crystal imported from Switzerland, if you want to change it, it is about 30% of the watch price. It is recommended to send it to the repair shop designated by the original factory for maintenance. Many Swiss watches have confidential intellectual property rights, and there is also sealing technology, so if your watch has a large and serious scratch, you can send it back to Switzerland for repair.

Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

1. Determine whether the watch is wound; 2. Detect whether the watch hands rub against each other and collide together; 3. Detect whether the watch is magnetic; 4. Detect whether the movement gear is misaligned; 5. Leaving it for too long will cause the oil sludge to dry up; It is conceivable that the only way to wear the watch on your hand is to move with your arm

1.Magnetization of the watch: The watch is exposed to items with magnetic fields too much, which leads to the phenomenon of magnetization of the watch, causing the watch to run inaccurately.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to return to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

Mechanical watch or battery? Go to the mall or the place that sells watches to deal with it

Watch suspension: Anyone who knows a little about mechanical watches knows that fully automatic mechanical watches are wound entirely by the swing of the arm.

Therefore, if the watch is left for too long or the amount of arm activity does not meet the requirements of the watch winding every day, the watch will cause the mainspring to be winding and the potential energy is insufficient, which will cause the watch to be unstable or stop when it is not worn at night.

If this happens, we can manually do an arc movement before the watch is placed. Or use the manual winding function to wind the watch. This keeps the watch with enough kinetic energy storage to keep it running until the next day.

Hello, it may be a lack of power Generally, the normal winding is 30 times, which is basically full, (provided that you want to be full) The watch on your hand does not matter, as long as you keep it up until you can't turn it, the mainspring is full.

For automatic watches, because most automatic watches can be wound by hand, especially when worn for the first time or after stopping, you need to start the winding with your hand first. (It is recommended that you do not rely on the rotor to wind the full string at the beginning) everyone also knows that because the automatic watch is "not up to the string", it is recommended that the number of winding times of the automatic watch should be more than less, and you may wish to put a few more, such as up to 40 times, it is basically guaranteed to be full.

If your mechanical watch accidentally falls to the ground and the watch does not go, it is likely that the internal parts of the watch are damaged, and it will be sent to a professional repair shop for repair.

So how much does it cost to repair a mechanical watch if it doesn't go away? The cost of maintenance of mechanical watches is probably hundreds to thousands of yuan, and the specific ** depends on the complexity of the mechanical watch movement, the degree of watch damage and the ** of the watch, which will affect the maintenance cost.

Watch stealing is related to problems such as watch stoppage, watch bumps, and hairspring failures. Watch steal stop is when the watch has enough power, the watch stops, and after a period of time it starts to move again, so that the watch will slow down, that is, the watch steal stop phenomenon.

Watch stopping: Anyone who understands mechanical watches knows that fully automatic mechanical watches are wound by swinging on the arm, if the watch is placed for too long and the arm movement is insufficient, the watch will be insufficient in potential energy, and the watch will be unstable when it travels, and there may be a sneak stop at night. If this is the case, you can manually perform an arc motion before placing the watch.

Watch bumps: In the process of wearing the watch, because you may accidentally bump into some hard objects, if you accidentally bump the watch in daily use, it will cause the parts in the watch to loosen, resulting in the watch stopping. After such a situation, it is recommended that you go to the after-sales service for maintenance in time to avoid more serious damage.

Hairspring failure: hairspring failure will also cause the watch to stop, if the usual amount of activity is too large, the watch will be particularly tight, the spring will produce a malfunction, and there will also be a lack of power. This usually happens at night.

If the watch stops or the time is inaccurate, it is recommended to overhaul the watch in time.

1. Insufficient power: Generally speaking, automatic mechanical watches only need to be worn for eight hours a day and sufficient wrist activity to provide sufficient power, and if IWC watches are not gone, then the general situation is caused by insufficient power, and only need to make up for the kinetic energy by manual winding. If it is a manual mechanical watch, it needs to be wound regularly every day, if you accidentally forget, it will also cause stopping, as long as you wind it again to make up for the kinetic energy.

2. External force: mechanical watches contain a variety of parts, which can easily cause damage if they are violently collided, which will cause IWC watches to not go.

3. Water ingress into the watch: When the watch is flooded, if it is not treated in time, it will cause rust, which will cause the watch to freeze and stop.

4. Other reasons: gear misalignment, hairspring breakage, watch magnetization, etc. will also cause the watch to stop. It is recommended that you go to the maintenance service center, Block C, Hangzhou Building, Kunhe Center 3006 for inspection and maintenance.

Common reasons for watch stop-and-go:

1. Insufficient power reserve of the watch: You need to check whether your watch has sufficient power, if the amount of exercise in the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. The watch has been hit or impacted: the watch is very precise, if the watch is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. At this time, it is necessary to deal with it in time.

3. The lack of oil in the movement of the watch or the wear and aging of the internal parts may cause the problem of running time, which needs to be sent to the Piaget service center for maintenance services.

In addition to the above common situations, the watch is affected by some ambient temperatures: if the balance spring of the watch is magnetized, the watch will not be accurate.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

IWC Watch suddenly stopped leaving the maintenance location in Room 707, 7th Floor, Building 1, Grand Gateway Center, No. 1 Hongqiao Road, Xuhui District, Shanghai.

The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight. With these designs, the watch is waterproof.

But whether the watch can forever. Absolutely waterproof? No.

Originally, it was absolutely waterproof according to the design requirements, but because we have to wind it every day. It is necessary to dial the needle frequently, for a long time, the waterproof ring will be worn and there will be gaps, and the sweat on our hands and necks will also corrode the waterproof rubber ring on the back cover, even if there is no sweat corrosion, the rubber ring itself will age and loosen with time.

First of all, you need to see if your watch is manually wound or automatic, there are several reasons why the watch does not go in general

First: mechanical watches need to be cleaned and maintained within 2-3 years of wearing.

Second: If the watch is fully automatic, there may be a reason why the watch does not go due to insufficient power.

Third: It is a problem with the internal movement of the watch, and it is recommended to go to the after-sales maintenance center to check it.

Reasons why the mechanical watch stops or goes slowly: If there is a stop without a bump, it is usually due to a lack of power, you can fill the spring every morning to see if there is still such a stoppage. If this is still the case, it is recommended that you go to a professional repair shop and let the master check it.

In addition, the mechanical watch should be fully maintained in 3-5 years, and the oil should be washed and lubricated to ensure that the internal parts of the movement can operate normally.

Insufficient kinetic energy, insufficient winding, insufficient kinetic energy, gear failure, lack of maintenance, etc., will now cause the watch to stop, and you need to go to a professional repair center for testing and processing. The specific situation needs to be tested and processed by a technician, and it is recommended to consult in detail.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.

In general, the watch will not easily malfunction, and most of the malfunction problems are due to the improper use of the watch. Many people know very little about watch maintenance, so they do not do a good job of watch maintenance, which often leads to watch failure.

So, how do you avoid malfunction on your watch? Let's talk about it briefly.

1. During the wearing of the watch, it is inevitable that the sweat on the hands will corrode the case, so it is recommended that you often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat and affecting the appearance.

2. For watches with leather straps, leather will absorb moisture, in order to avoid corrosion, watch leather straps should try to avoid contact with high humidity, water-based or oily substances and cosmetics.

3. Watches and jewelry should be stored separately to avoid wear and tear between them.

Fourth, the watch should also avoid strong impact, but also try to prevent the temperature difference in the environment is too large, even if the watch is waterproof, please do not operate the watch function in water.

5. For watches that are not worn often, they should be stored in a box away from the magnetic field, and the watch should be wound at least once a month to ensure the normal operation of the movement to avoid the lubricating oil drying up.

Therefore, for a famous watch, the quality of maintenance will have a direct impact on its value.