What to do if the wireless network speed is very slow, what to do if the wireless network speed is s

First, see if someone has stolen your wireless network, and now there is a kind of network card that can crack the password, and second, see if the wireless network connection is limited, the connection is limited, or the number of connections is limited.

If you don't have a problem with your router, you can apply to your network operator to increase your speed, but you'll have to pay an extra fee every month.

Reboot your router.

<> wireless routers send signals across the board, and the closer the router is to obstacles, the more easily the signal is suppressed. Therefore, you should choose a high and spacious location in your home to place the router so that the signal can radiate downwards and reduce the blocking of obstacles and signal blind spots.

Routers transmit data information in the form of data packets. Electrical appliances, glass, and metal items will cause obvious interference to the signal, resulting in transmission blockage. Friends can keep the router away from the above categories of items to reduce interference.

1. If the router version is older, then regularly updating the firmware can ensure that the software of the router is in a good and efficient operating state.

2. If the wireless router at home has been used for too long, it will be a good choice to replace it with a new dual-antenna or multi-antenna router.

1. Buy a wifi repeater: plug the repeater into the socket at home, and the signal range and strength can be enhanced after debugging.

2. Reuse of old routers: Set the old router to AP mode, and then connect to the existing main router through the LAN port to expand the signal.

3. Adjust the antenna: Most router antennas are placed in a "ring", and in the vertical direction, the signal coverage will be wider. The antenna can be adjusted appropriately according to the distance and angle.

Usually the router is factory set to mixed mode with a set rate of 75%.

1. Adjust the rate: The partner can enter the security settings and adjust the rate of the router to the maximum.

2. Select Single Protocol: Set the mode to use only protocol.

Open the browser, enter the router address and username and password, check whether there is an unfamiliar device in the corresponding menu, and compare the IP address with your own hardware.

Then send the friends three magic weapons to prevent rubbing the net.

1. Set a complex password.

In the Tab or Security, select the WPA-PSK WPA2-PSK password and set a complex, easy-to-remember, and hard-to-guess password.

2. Disable the DHCP function.

In the Local Area Network (LAN) settings, disable the DHCP function to prevent automatic IP address assignment to wireless clients.

3. Change the default IP address.

If it defaults, it can be changed to prevent easy guessing.