What should I do if the USB drive is wet? What should I do if the U disk is flooded

After the U disk is wet, do not use it immediately; It is recommended that the landlord store it in a ventilated and dry place, preferably with the mouth facing down, and open the protective cover of the USB flash drive; Generally, it can be used after 12 hours of standing, for the sake of safety, it is best to shake the U disk twice before use, to see if there is any water thrown out, if not, you can use it.

Usually for various reasons, I accidentally let my USB flash drive fall into the water, what should I do? Shenzhen is good, and the electronics teaches everyone how to deal with it!

Some people will use the hair dryer to forcibly dry the method to deal with the overboard USB flash drive, which is fast, but there are great drawbacks. Heating and drying can certainly shorten the dehydration time of the USB flash drive, but the damp circuit board gene is quickly dried by external heating, and the internal moisture of the USB flash drive cannot be synchronously volatilized, at this time, because the internal stress will cause the circuit board to crack and the circuit is damaged, so simple heating and drying is not advisable.

And many people do not do pre-treatment before drying the U disk, although the U disk will not be short-circuited after falling into the water, but when we use a hair dryer to dry or dry it, with the evaporation of water, the salt and other impurities in the water are attached to the circuit board, these things are often electrical conductors, and it is likely to damage the U disk when it is used with electricity.

At this time, alcohol can play its role, do not rush to dry after the U disk falls into the water, first wash it with industrial alcohol, (do not use medical alcohol, the alcohol content is only more than 30 percent, most of it is water) to ensure that there is no sewage in the U disk, the sooner this work is done, the better. If the USB flash drive has not been treated in time and has been dried naturally, it is recommended to disassemble it, take out the circuit board and clean the board base with anhydrous alcohol and a soft brush, and then dry the USB flash drive naturally. In general, the function of the USB flash drive will not be affected by this treatment.

Be careful not to turn on the power supply first, if there is a fan to dry with a fan, if not, be sure to hold the water first. Then let it dry in the sun for a while.

It couldn't be better to be able to open the shell and blow dry.

If you can't turn it on, blow it down with a hair dryer and shake it off vigorously. If you don't need it urgently, put it in a dry and ventilated place to dry it for a few days before using it.

Dry it, let it dry, and if it doesn't work, replace it with a new one.

Dry it first and try again to see if there is any problem.

Try it again after drying it with a hair dryer and see if it still works.

The USB flash drive is flooded, and it can still be used.

Because first, although the USB flash drive is not sealed, it may not completely soak the inside if it comes into contact with water for a short time; Second, even if it is completely wet, the device and PCB will not be damaged at that time.

When the U disk is flooded, the treatment methods and precautions are as follows, to ensure that the U disk is thoroughly dry and completely free of moisture before it can be connected. Secondly, if it is a laundry detergent or other liquid that may cause corrosion to electronic devices, soak it in anhydrous alcohol and then dry it before use.

Do not use the method of exposure to the sun or hair dryer drying, which will bring two harms, one is that it may cause the deformation of the U disk shell; Second, it has a negative impact on the circuit part.

We are now in the daily office, in order to facilitate the preservation of information, we will copy the relevant documents in the U disk, but sometimes when we get home, we forget about it, and as a result, we wash the clothes with the U disk. At this time, many friends are particularly worried that they have important files in the USB flash drive, can they continue to use it after being blistered? What should I do when I use it?

Today, I will talk to you in detail, what should I do if the USB flash drive is washed? <>

First of all, we are sure that even if the USB flash drive is washed with water, it has no effect and can be used normally. Because the USB flash drive itself is not charged, they are essentially a storage base storage device, especially when it is not in contact with the computer or mobile phone, it will not be burned. However, we must remember that after the USB flash drive has been washed with water, it must be carefully handled, sometimes because the structure of the USB flash drive will be more complicated, and the inside will be completely wet, so we must ensure that the USB flash drive is completely dry before it can be used online.

If it is a USB flash drive soaked in water, our treatment method is relatively simple, put the USB flash drive in a ventilated place, let it dry naturally, and it can be used normally in about one to two days. If the potato boy is in a hurry to use it, we can also open the shell of the USB flash drive and dry it carefully with the hot air mode of the hair dryer, so as to ensure that there is no water inside and can be used normally. However, if it is placed in a USB flash drive that has been soaked in laundry detergent or laundry detergent, we must carefully check whether the USB flash drive is damaged.

It is best to use high-purity alcohol to gently wipe the part of the laundry detergent inside the U disk, and then use the above methods to dry it and dry it to be used normally. <>

To sum up, we should deal with the USB flash drive in time after it has been blistered, so that it can be used normally after it is completely dry, remember not to insert it into the computer with water, otherwise it will damage the hardware of the computer, and even cause the computer motherboard to burn out.

1. The U disk itself is not electrified, so it will not be short-circuited if it falls into the water, and if it can be dehydrated correctly, it will generally not affect the performance and use. Some people will use the hair dryer to forcibly dry the water U disk, although this method is fast, but there are great drawbacks.

Although heating and drying can shorten the dehydration time of the USB flash drive, the damp circuit board base dries quickly due to external heating, and the internal moisture of the USB flash drive cannot volatilize synchronously, at this time, due to the internal stress, the circuit board will crack and the circuit will be damaged, so simple heating and drying is not advisable.

2. And many people do not pre-treat the U disk before drying, although the U disk will not be short-circuited after falling into the water, but when it is dried or dried with a hair dryer, as the water evaporates, the salt and other impurities in the water are attached to the circuit board, these things are often electrical conductors, and it is likely to damage the U disk when it is used with electricity.

3. The correct treatment method should be, do not rush to dry the U disk after it falls into the water, rinse it with clean running water first, ensure that there is no sewage in the U disk, and it is best to use anhydrous alcohol to disturb the rinse if possible. The sooner this is done, the better.

4. If the U disk has not been processed in time and has been dried naturally, it is recommended to disassemble it, take out the circuit board and clean the board base with anhydrous alcohol and a soft brush mold ruler, and then dry the U disk naturally. The performance of the USB flash drive after this treatment will not be affected in general.