-
Vaillant is a big German brand, and the quality is needless to say. I'm in the heating industry, so I'm familiar with this brand. Floor heating is suitable for the elderly and children who have been at home for a long time and even like to sleep on the floor; Radiators are more suitable for white-collar workers who have a faster pace of life, and they have requirements for heating speed.
If conditions permit, they can be mixed, and Vaillant may also have discounts for supporting facilities.
-
Whether it is suitable to install radiators or floor heating at home, it can also be determined according to the situation of your own house, floor heating occupies a high floor, and radiators occupy space in the house. In general, geothermal heat is more space-saving than radiators, but it takes up part of the floor height. When purchasing, you should choose according to your own living requirements, and you don't need to pursue imported brands excessively, and you can be affordable and practical.
-
Floor heating is the overall ground heating, the heat is from the bottom up, the heat dissipation is more even, and the whole house can be warmed. The radiator is the convection of indoor air to achieve the purpose of heating. The temperature difference in the same room is larger, and the comfort is slightly worse.
In addition, the floor heating is also more space-saving, there is no radiator or fan coil unit and pipe indoors, which increases the indoor area, and the home is also beautiful and tidy. The radiator takes up more space than the radiator, and it is easy to have sanitary dead corners. However, now radiators have a beautiful appearance and can also be matched with home style.
But radiators also have the advantage that floor heating can't be replaced. The radiator heats up quickly, it can be heated in 10-30 minutes, and it can also be heated intermittently, which is relatively more suitable and saves money. But if the floor heating is also used intermittently, it will have no effect, and the heating will be too slow, but it will be a waste of money.
The radiator is relatively simple to maintain and is not easy to block. It's fine if you don't clean it after ten years of installation. If there is a water leak, the pipe fitting is replaced and it is over. And if there is a problem with the floor heating, it takes a lot of effort and costs more money to pry the floor.
Radiators should also be more hygienic. Except for the updraft above the radiator, the rest of the position is a downdraft, which brings up a lot less dust. The bottom-up heat dissipation characteristics of floor heating will activate dust and bacteria on the ground, suspended in the respiratory layer, and the indoor dryness in winter, so it is easy to cause respiratory diseases and dry eyes.
Suggestion: Mix and match is the most practical. Because whether it is installed with floor heating or radiators, they all have their own merits.
In different parts of the house, suitable for different heating methods. Therefore, it is best to lay floor heating in the living room and dining room, because usually staying in the living room for a long time, the floor heating is more mild; Bedrooms are equipped with radiators, which can quickly heat up and make sleeping more comfortable.
-
Underfloor heating and radiators are both good ways to heat your home, and which is more practical depends on which one is more suitable for you.
A comprehensive comparison of underfloor heating and radiators:
1. Comparison of heating and efficacy.
The heat dissipation of floor heating is carried out in the form of radiation, and the ground heat dissipation is relatively uniform, so the human body feels the comfortable feeling of body warmth but not anxiety, foot temperature and cold head, but the heating of floor heating is relatively slow (the heating speed of water floor heating is slower than that of electric floor heating). The heat dissipation method of the radiator is indoor air circulation convection heat dissipation, in terms of comfort, it is definitely not as good as floor heating, but the radiator heats up quickly, and it can reach the ideal temperature within half an hour.
2. Comparison of later maintenance.
Both radiators and floor heating need to lay pipes, and most of the pipes for floor heating are concentrated on the coils on the ground, so extra attention should be paid during construction. From the maintenance point of view, if the floor heating leaks (the water floor heating referred to here, the heating cable electric floor heating is another matter), the entire ground needs to be pried open to replace the pipes, the maintenance cost is high, and it is troublesome. The radiator is much more convenient, and you can change it directly.
3. Comparison of energy saving.
Compared with the radiant heat dissipation mode of radiator convection and floor heating, the thermal efficiency of floor heating is higher, because the heat of floor heating is concentrated in the height of the human body in the process of delivering heat to the human body, so the heat loss of floor heating is less. When turned on for the same time, the energy efficiency of underfloor heating is about 30% higher than that of radiators.
4. Comparison of space occupied.
The floor heating system is a hidden project, which requires the use of various leveling means, and needs to occupy the height of the house 6-8cm, which has a small impact on the spacious house, but may cause a certain depression to some houses with low floor height. Radiators do not occupy the height of the house, but they require space for them, and the pipes that connect them will affect the aesthetics.
5. Comparison of installation requirements.
The installation of underfloor heating is carried out before or together with the renovation of a new house, and it will be more troublesome to install underfloor heating in a renovated house, while the installation of radiators does not have so many restrictions. Compared to installing underfloor heating, it is much easier to pry open a real floor.
-
I think radiators are more suitable for home use. Because it has good temperature control and is easy to maintain. The floor heating is easy to clog after a few years, it is difficult to maintain, the building is high, the temperature is not easy to control, and the air at home is very dry, and the body is uncomfortable.
-
Which is better for home use, underfloor heating or radiators?
-
There are pros and cons. Geothermal heat, in winter, from the sole of the foot evenly on the temperature, good foot feeling, the temperature rises slowly and evenly, does not occupy space to facilitate the layout of furniture and other layouts, the disadvantage is that it is not suitable for continuous heating or poor heating environment, and then once there is a water leakage maintenance is inconvenient, of course, geothermal water leakage is also extremely rare.
Radiators, suitable for not continuous heating or poor heating environment, easy maintenance, the disadvantage is that it occupies space and is inconvenient for furniture and other layouts.
Nowadays, geothermal heating is relatively large compared to radiator heating. Which one is suitable, first depends on the heating conditions, and secondly, your own preferences.
-
Underfloor heating and radiators each have their own benefits and do not take up space. Radiator. It takes up a lot of space.
You look at your own house. Which one is suitable? The small house is suitable for the underfloor heating house.
It is also possible to arrange radiators reasonably. The heat dissipation effect is the same. Nowadays.
Most of the buildings built are underfloor heating.
-
Which is more suitable for the home, floor heating or radiators, I think radiators are more suitable for the home. First of all, the cost of floor heating is relatively high. And radiators are economical and practical.
-
Both are suitable for home use, the floor heating is good-looking, the radiator is easy to maintain, and each has its own strengths.
-
Which is better for home cable or radiator? I think floor heating is more suitable for the home, because floor heating can be evenly distributed to each room from the ground up, while the radiator can only have a partial shape to dissipate heat, which cannot fully make the inability to get a warmer temperature.
-
Personally, I think floor heating is more suitable for settling in the house, this kind of heating will be in every corner, and the radiators are different.
-
Floor heating and radiators are practical at home, or radiators are suitable for small homes
-
Underfloor heating is more suitable because underfloor heating is safe.
-
Specifically, underfloor heating is hotter than radiators and does not take up space.
-
It depends on your own preference, but I personally still like underfloor heating.
-
1. The installation conditions of radiators and floor heating are different.
Radiator installation: more inclusive, whether it is a new house decoration or an old house upgrade can be met, and there is no requirement for floor materials and insulation conduits, just choose the right height and sufficient amount of radiators according to the family space area. As long as there is no large piece of furniture around the radiator to block the heat dissipation, it is fine.
Floor heating installation: The floor heating system is a concealed system, and all pipes are buried in the ground, so it is necessary to design and construct in the early stage of house decoration, which is suitable for new houses without decoration. Moreover, the floor heating will occupy a floor height of about 4cm after being backfilled with dry and wet paving, which will reduce the net height of the room, and the room type with insufficient space height is not suitable for using floor heating.
And after the installation of floor heating, the purchase of the floor also needs to pay more attention, small thermal resistance, low water absorption, small expansion and deformation of ceramic tiles, marble floor materials are more suitable for floor heating families.
2. The heat dissipation effect of radiators and floor heating is different.
Radiator: The heat dissipation method of the radiator is mainly based on air convection, which heats the air around the radiator first, so that the hot air forms convection in the room, so as to achieve the purpose of heating. Therefore, the radiator heats up quickly, and the heating system can reach the preset temperature within half an hour of opening, which can basically be used immediately.
Floor heating: The heat dissipation method of floor heating is radiant heat dissipation, which radiates heat through the hot water in the floor heating pipe, and then conducts upward heat dissipation by the floor. Underfloor heating pipes are located throughout the rooms, so the temperature difference in the room is small.
However, due to the large specific heat of the water, coupled with the need for floor conduction, the floor heating rate is slower, especially when it is turned on for the first time, and it takes a while for the whole room to heat up. In the same way, the floor heating heats up slowly and cools down slowly, and the floor and concrete layers have a strong energy storage capacity, so they can keep the room temperature stable even if they run intermittently.
3. The comfort of radiators and floor heating is different.
Radiator: Because the radiator uses air circulation convection heat dissipation, the room temperature is hot and cold, the closer to the radiator, the higher the temperature, the room temperature gradient changes significantly, and the comfort is different from floor heating, but the room temperature difference can be improved by increasing the number of radiator groups.
Floor heating: The uniform heating method of floor heating from bottom to top is conducive to blood circulation and is suitable for installation in families with elderly and children.
-
If the environment is not particularly cold, you can choose radiators, if the environment is cold, it is best to choose underfloor heating, so that the temperature is more uniform and higher.
-
It is better to choose floor heating, floor heating heat dissipation is more even, which can make the temperature of the home moderate, and floor heating will make the home more beautiful.
-
Personally, I think that the effect of floor heating is better: the heating effect of radiators is far inferior to that of floor heating, and it also takes up space.
-
Underfloor heating is better, but if there is a leak. It is not easy to find the leak point.
-
Underfloor heating is good, but **high.
-
Underfloor heating is more comfortable and radiators are more economical
In some areas, when central heating is stipulated, it is not allowed to change the floor heating, and only radiators can be installed; The installation of underfloor heating will take up about 5 8cm of floor height.
1. Different working and living habits. The biggest advantage of the radiator is that it can be turned on and heated, for the ninth night.
Fifth, office workers who go out early and return late are the best choice. New landscape radiator, the whole house heats up quickly. Heating is convenient, no need to wait.
If there are permanent residents such as babies and the elderly, the demand for instant heating is not obvious, and the family needs to be heated for a long time, then it is recommended to choose floor heating, continuous warmth, and the longer it is opened, the more money it will save. Of course, large villas can directly adopt a mixed installation method, with floor heating in the living room, radiators in the bedroom, study, bathroom and other areas, so that it is more efficient to combine heating.
2. The requirements for home decoration are different. For new home renovations, underfloor heating and radiators can be installed. It needs to be carried out synchronously according to the construction progress, whether it is floor heating or radiators, the ground needs to be grooved, and the floor heating pipes or heating water pipes need to be laid and fixed.
If it is an old house to install heating, you can only choose radiators, because the paving floor heating project is large and burns money. Surface-mounted radiators are more convenient and faster.
3. The installation budget is different. For floor heating, the main choice of pipes also needs to pay attention to water collectors, thermostats, insulation auxiliary materials, etc., and the installation cost is slightly expensive. Radiators, the main selection of radiator equipment, ** and the installation fee is relatively cheap.
In terms of the cost of heating in the later stage of the two, the key depends on whether it is short-term heating or long-term heating. Long-term heating is more economical for underfloor heating, and short-term heating radiators are more economical.
-
1. Comfort.
Radiators are a convection-based heating method. The radiator first heats the surrounding air, so that the air forms a convection flow in the room to achieve the purpose of heating. This heating method is that the temperature around the radiator is high.
With the increase of the distance from the radiator, the temperature decreases, and the temperature difference between the same level is large. This phenomenon is especially noticeable in large rooms, where comfort is poor. Radiators are more suitable for small and medium-sized homes that need quick heating.
Office workers are more suitable for using radiators, floor heating is from the bottom to the top of the heat dissipation, the heat dissipation method is to conduct heat to the entire ground at the same time; The use of low-temperature floor heating, "warm feet and cool roof", warm and comfortable under the feet, suitable for people's body temperature requirements; The temperature is balanced, the heat dissipation is uniform, there is no wind blowing, it is not easy to produce floating dust, no noise, and it is hygienic and environmentally friendly. The temperature inside the house is balanced, so in terms of comfort, the underfloor heating is better. Underfloor heating is more suitable for large apartments and families with elderly and children.
Households that need 24-hour heating in winter prefer underfloor heating.
2. Energy-saving comparison.
Although underfloor heating needs to be heated throughout the day to ensure temperature balance, it is much more energy-efficient than radiators. This is mainly because floor heating uses low temperature radiant heat dissipation, and floor heating has the function of temperature control and temperature regulation. Although it is turned on for a long time, it consumes very little power.
Radiators dissipate heat for air convection. The water temperature is required to reach a certain height, and the radiator has no temperature control device. After the hot water is cooled, it needs to be recycled, so the energy loss is 30% higher than that of underfloor heating.
When it comes to energy saving, underfloor heating has a clear advantage. In the same case, underfloor heating has a higher energy saving than radiators.
3. Construction difficulty.
Floor heating is a concealed project, the amount of work is huge, especially the laying of floor heating pipes, to avoid the huge disaster of water leakage in the later stage, only the rough house can install floor heating heating. There are two ways to install radiators: exposed and concealed. Both methods are suitable for rough rooms.
The concealed pipeline is hidden, and the construction is slightly complicated. Renovated houses can only be installed in the open-mount way. The pipe is installed in the exposed pipe, the construction period is short, convenient, and the radiator installation is more convenient.
4. Comparison of installation.
Underfloor heating or radiators should also be considered. In general, floor heating and radiators are about the same, but in comparison, floor heating is slightly cheaper, and a system may be hundreds to thousands of dollars cheaper. Floor heating or radiator installation, it is said that the ruler has a length and an inch, and an inch is short, each with its own advantages and disadvantages.
First of all, a renovated house can only be fitted with radiators. If it's a humble house, both are fine. Generally speaking, underfloor heating is more comfortable and suitable for residents with long-term elderly and children at home; The radiator heats up as soon as it is turned on, which is more suitable for urban people with a fast-paced life.
Underfloor heating is slightly cheaper.
The installation of kitchen radiators, in terms of material, the kitchen is suitable for choosing steel or copper-aluminum composite radiators, the choice of these two types is for heating considerations, they have a large amount of heat dissipation, rapid heating, open 15 minutes before entering, and when they enter, it is already warm like spring, which will not make people wait too long and avoid the pain of freezing; Second, because the kitchen is full of smoke and dust, the items placed in it are easy to accumulate dust, and it will be difficult to clean up if it is too late to clean for a long time, which requires the radiator installed in it to have a smooth surface and easy to clean and take care of. Among the many product types, steel and copper-aluminum composite meet the above requirements and are deeply loved by users.
Most of the heating in southern cities is self-heating, and floor heating and radiator heating have their own advantages and disadvantages, and they can be selected according to their own needs. >>>More
Copper and aluminum composite is good, let me analyze it with you specifically: >>>More
The convection-based copper-aluminum composite radiator has become one of the hot products in the cold winter because of its outstanding anti-corrosion performance, high calorific price ratio, high value retention rate and beautiful appearance. >>>More
Clean with gauze paper: no oil. Water:
Then just glue it with AB glue! AB glue is another name for two-liquid mixed hardening rubber, one liquid is the glue, one liquid is the hardener, the two liquids can be hardened by mixing, and it is not necessary to rely on temperature to harden and mature, so it is a kind of hardening glue at room temperature, and it is sometimes used to make models. Generally used in industry. >>>More