How to fix a broken SSD, and how to quickly fix the hardware damage of the SSD?

There are two aspects of a broken SSD hard drive, on the one hand, the hard disk is a bad block, and on the other hand, there is physical damage.

1. The SSD has a bad block on the hard disk.

1. If there is a bad block in the SSD, it cannot be repaired.

Note that the SSD hard drive bad block is not a so-called logical bad block. SSD hard drives are filled with transistors inside, and they cannot be restored after being damaged, unlike traditional hard drives. But to find out whether your bad block is a logical bad block at the operating system level or a problem with the SSD particle, usually the internal page space will be fragmented after the SSD is read and written for a period of time, and the speed will decrease.

2. Don't use defragmentation.

Put the HDD.

The "good habits" of the times have been brought to SSDs, which are not necessarily "easy to use". In the past, the system slowed down and generally required the hard disk to be defragmented, and often after the deconsolidation, it was felt that the system was running much faster. But defragmentation is a complete "torture" for SSDs.

Consumer-grade SSDs.

The use of MLC NAND Flash (multi-layer unit flash memory) as the storage medium, this kind of chip generally only has 5000 10000 times of erase life (PE), defragmentation needs to frequently erase and write the hard disk, which will greatly reduce its life.

2. Physical damage.

If the SSD hard drive is physically damaged, it is recommended to take it to the official after-sales service center for repair and replacement.

1. SSD damage is generally due to firmware failure or storage particle damage.

The former uses a mass production tool (i.e., a firmware tool) to reflash the firmware, and there is hope for repair; In the latter, the flash memory particles are damaged, and the stored data is completely scrapped and cannot be recovered.

2. You can first try to find a mass production tool to flash the firmware, and then determine whether it is really a firmware failure.

If the SSD is broken, it can be repaired by itself, and the data can be perfectly repaired by shorting the hard drive.

After the SSD is damaged, if the data is not lost or overwritten, it can generally be repaired, and there are two ways to repair the file, namely the built-in repair of the system and the repair of data recovery software.

Method 1: System Repair Function.

For some damaged and damaged hard disk data files, if you want to repair them, you can generally repair them with the help of the system's built-in repair function, the specific operation steps are as follows:

1. Insert the damaged hard disk into the computer using a card reader to ensure that the computer can read the data files stored on the hard disk.

2. Select the newly inserted SD card, right-click the SD card disk, and click the "Properties" option in the options.

3. After clicking on the attribute option, select "Tools", "Check Errors", and click "Start" in the "Start Checking" option to automatically repair the damaged data in the hard disk.

Method 2: Data recovery software.

1. Open the data recovery software [Hi Format Data Recovery Master], select the "Quick Scan Recovery" mode in the main interface of the software, the Quick Scan Recovery mode is suitable for recovering some accidentally deleted files, such as the Quick Scan Recovery Mode can not retrieve the accidentally deleted files, you can also use the Deep Scan Recovery mode to scan.

2. Select "Where the original data file is stored", here you can directly select the disk where the accidentally deleted data is stored, for example, if it is a mobile hard disk deleted, you also need to select the corresponding newly inserted "mobile hard disk", and click "Start Scan" below to automatically scan the disk where the accidentally deleted data is scanned.

3. Wait for the end of the scan, you can also select the files we need to recover in turn according to the file path or file type, if it is a document, you can directly search for it in the form of the file path, and select the corresponding file, click the "Recover" option below to retrieve the lost files.

You can only find a professional maintenance master to test it.

1. The SSD cannot be repaired if it is broken.

2. Because the SSD has an automatic wear and tear balancing mechanism, as long as it is powered on, it may be defragmented in the background, and once the hard disk is damaged, the data inside can hardly be recovered. The structure of the SSD is special, the integration is very high, and the repair is difficult. Even if it can be repaired, the cost of repairing it is much greater than the cost of buying a new SSD.

If you really need to repair, you can consult the SSD after-sales service or a professional data repair center.

Prepare the tool:1. Computer and SSD waiting to recover data.

2. Hard drive data recovery software diskgenius.

Start recovery: <>

2. Double-click to open the installed hard disk data recovery software diskgenius.

3. Select the partition you want to recover data from, and then click the Recover Files button on the toolbar.

Here, if you only recover deleted files, you can just select the Recover Deleted Files option; However, if the partition has been altered or overwritten after the loss of files, then you can check all the other options so that the software can perform a full deep scan to find more recoverable files.

5. Preview the file.

The scanning process can be previewed when it is running, paused or at the end of the scanning process, and the preview window can be opened by double-clicking on the file on the right side of the software. If the file preview is normal, then the file is not corrupted and can be recovered properly.

6. Copy the file to complete the data recovery.

Copy the data found by the software to other disks, so that the lost data will be truly recovered: check the required file file and copy it to the specified folder by clicking the right mouse button.