-
Only use the SSD to connect it, enter the BIOS, set the hard disk mode to AHCI mode, and then set the U disk as the boot disk, so that you can use the U disk to boot, and you will recognize your SSD when you enter the PE system. This will allow you to do the partitioning operation.
-
You only plug in the SSD to install the system, and after you install it, you can connect it to a normal hard drive.
-
Upgrading the cabbage to the highest version is ok!!
-
The computer has an SSD partition installed, and the specific method is as follows:
1. Right-click the [My Computer] icon on the computer desktop, and click the [Manage] option.
2. Click the [Disk Management] option on the left.
3. Select a partition in your computer, right-click, and click the [Compress Volume] option.
4. Enter the amount of compressed space you need to adjust, and click compress.
5. Then select the format of the disk for your new simple volume, here we generally choose "ntfs".
6. After the setting is completed, the win7 system will give the complete new disk partition information in the "New Simple Volume Wizard", and click the "Finish" button after confirming that it is correct.
7. Done. <>
-
1. Click the mouse in the lower left corner of the desktop, and the following pop-up window appears:
2. Press the K key or click Disk Management (K) with the mouse, and the following window will appear
3. Right-click on the C drive and select the compressed volume
4. Wait patiently for a while
5. The size of the available compressed space appears.
6. If the free space size is compressed, the C disk is too small, and now we are ready to compress 300GB for the D disk, so we fill in 300GB * 1024 = 307200, here on the basis of 307200 add 10MB or 20MB, in order to prevent the full calculation of 307200 by the partition table to occupy the space, and become, so that the capacity is not an integer and not beautiful.
7. After clicking on compression, the black part of the figure below appears, and the unallocated space:
8. Right-click on the unallocated space and select Create Simple Volume
10. If you only divide a D disk, do not change the capacity, if you want to divide the unallocated space into multiple areas, here you will write the capacity required by the D disk.
11. The drive letter here has become E by default, why not the D drive, because the machine has an optical drive, and the D disk has been occupied by the optical drive that came first. Here we will keep the E disk unchanged, if you have obsessive-compulsive friends, you can go back to the disk management page and right-click on the optical drive, choose to change the drive letter and path, change D to the letter after it, leave the position of D out, and then change the current E disk to D disk.
12. The interface in the following picture can name the partition, let's choose the next step first, because the partition is in [This Computer], and the right-click partition can still be renamed.
13. Click Done, and the operation of compressing the volume partition is over.
After following the above steps, you can compress the partition of the volume.
-
1. First install the SSD into the computer, then prepare a boot USB flash drive, then insert the boot USB flash drive into the computer, set the boot to enter the USB flash drive to boot, and then enter the PE tool interface, and then click to open the "partition tool diskgen".
2. After opening the Diskgen partition tool interface, first find the SSD on the left side and click to select it.
3. Then click "Hard Disk" in the Diskgen tool menu, and in the drop-down menu, click "Quick Partition".
4. In the partition operation interface, first select several zones, 240GB SSD, because the capacity is not large, it is recommended to have 3-4 zones. Here I chose to divide into 4 areas,Then you also need to adjust the size of each partition in the advanced settings,Generally the first system C disk,The partition capacity is recommended to be greater than 50GB,Because you want to install Win10,So the C disk is divided into 60GB,The other 3 partitions,Each partition is about more than 50GB,Click "OK" at the bottom after completion。
5. After clicking OK in the previous section, the diskgen tool will partition the SSD according to the requirements, and when it is completed, the hard disk will be automatically formatted, and after it is completed, the SSD will be divided into zones.
-
If the new SSD is only used as a heavy disk, you can boot it into the system, right-click on this computer, select Management, select Disk Management, and then right-click the new SSD to partition it.
-
You can use third-party tools, such as DiskGenius, Partition Assistant, etc., which are free, easy to operate, and easy to use.
-
After installing the SSD, the setup method is instructed by the ants:
1. After installing the hard disk to the computer, the computer will be powered on and enter the desktop, and press the shortcut key "Win + R" to open the running window.
2. In the operation window, enter " " and then click the "OK" button to open the "Computer Management" window.
3. In the "Computer Management" window, click "Disk Management" on the left side.
4. At this time, the window of "Initialize Disk" will pop up, click the "OK" button.
5. Next, in the interface of "Disk Management", you can see that there is a disk that says "Unallocated", which is the newly added SSD, right-click on this hard disk.
6. In the right-click menu, click "New Simple Volume".
7. In the New Simple Volume Wizard window, click the Next button.
8. In the "Simple Volume Size" window, enter the capacity of the partition magnetic travel excitation disk, and then click "Next".
9. After selecting the drive letter (the default is OK), click "Next".
10. Select the default settings and click the "Next" button.
11. Check the settings, and after that's no problem, click the "Done" button to create a new partition. Double-click the computer icon on the desktop to view and use this partition.
12. Return to the "Disk Management" interface and follow the above steps to create other partitions on the remaining disks.
-
The question is what to do, the partition is very simple, directly use the partition that comes with windows or use Diskgenius to partition directly.
-
Self-use computer configuration 3, SSD partitioning method, C disk D disk all use SSD, the best effect.
-
Boot on a USB flash drive or partition the new hard drive on a computer that can be executed with partitioning software such as DiskGenius.
Run the diskgenius software (**The address is in the references), find your hard disk (pay attention to the hard disk model and capacity), right-click on it, select Search for lost partitions (rebuild partition table), and then you will find your previous partition, after the search is completed, right-click on the hard disk again, select Save Partition Table, and then open my computer, your previous partition should come out, and the data is the same as before, you can also use this software to partition, delete the original partition first, Then just create it, it's very simple. Good luck!
Yes, you can partition the hard disk when you reinstall it with a USB flash drive.
Maybe you don't understand a lot, just use a data to say, 1g=1024m know, right? But now the producers are calculated according to 1g=1000m,This is the problem of the base system,All storage products will be like this,The capacity to read on the computer is less than marked,So it's normal for you to have less capacity。。。 As for the black screen you said, Khan. >>>More
In fact, as long as a primary partition is OK,It is recommended to back up the data,C、D two partitions are from the new partition or formatted,It's best to use NTFS format,Only keep a primary partition,In the installation of win7, let yourself format the installed partition。 >>>More
The question of how Samsung SSD compares with other brands of SSDs is that the design concept of the product is different because of different brands, and each has its own advantages, so it is recommended that you choose the right SSD according to your needs and preferences. >>>More