How to set up AHCI mode in Lenovo notebook

Method steps.

1. Restart the computer or turn on the computer, then press the corresponding shortcut key to enter the BIOS setting window when the boot screen appears, use the arrow keys on the keyboard to select the "Config" option in the BIOS setting window, then select "Serial ATA (SATA)", and press the Enter key to confirm, as shown in the figure below

2. After opening Serial ATA (SATA), you will see "SATA Comtroller Mode Option [Compatibility]", press the Enter key to select it, as shown in the following figure:

3. At this time, a selection window will pop up, switch its mode to "ahci", press the enter key to confirm, as shown in the following figure:

4. After the mode switch, you can see that the parentheses after "SATA Comtroller Mode Option" will be changed to "AHCI", as shown in the following figure

5、The operation will modify the hard disk mode to AHCI mode,Finally, press the F10 key to save the settings just now and exit the BIOS settings,At this time, you can install the Win8 system,So far, the operation of the hard disk mode modification will be introduced here。

Method or step: Restart the computer or turn on the computer, then press the corresponding shortcut key to enter the BIOS setting window when the boot screen appears, use the arrow keys on the keyboard to select the config option in the BIOS settings window, then select Serial ATA, and press the enter key to confirm; After opening Serial Ata, you will see the SATA Comtroller Mode Option, press the Enter key to select it; At this time, a selection window will pop up, switch its mode to ahci, press the enter key to confirm; After the mode switch, you can see that the parentheses after the SATA Comtroller Mode Option are changed to ahci; Modify the hard disk mode to AHCI mode, and finally press the F10 key to save the settings just now and exit the BIOS settings, install the Win8 system.

1. When the Acer computer boots up and displays the LOGO interface, quickly press the F2 key, and then enter the BIOS settings interface.

2. After entering the BIOS settings, first use the arrow arrow keys to switch to the [Main] tab, then use the up and down keys to select SATA mode, and press the enter key to pop up 2 options "IDE" and"achi", use the up and down keys to select the IDE, and then press enter to confirm.

3. Use the right arrow keys to move the current column from [main] to [boot] column, and then use the up and down keys to switch between these 7 options.

Acer: Co., Ltd., a global computer integrated marketing brand, referred to as Acer, with the brand of ACER, is a Taiwanese computer manufacturing company founded by Shi Zhenrong and others in 1976, and is also the fourth largest personal computer manufacturer in the world. Acer mainly manufactures desktop computers and laptops, as well as computer peripherals such as personal digital assistants, servers, monitors and other storage devices.

Acer has an international operation management team, adhering to the corporate philosophy of "innovation and care", its products are sold to more than 100 countries around the world, and its unique new distribution model, as well as the care technology and care culture it represents, have successfully spread the high-quality, easy-to-use, reliable and trustworthy image of the ACER brand to the world and deeply rooted in the hearts of consumers.

ASUS notebooks can change the hard drive mode to AHCI mode by following these steps:

1. After booting up, click the F2 button to enter the BIOS;

2. Under the Advanced tab, move the cursor to SATA Configration and click Enter.

3. You can select IDE mode &AHCI mode in SATA mode selection.

After the modification is completed, you can click the F10 key to save the settings and exit the BIOS interface.

ASUS notebooks can be turned on by clicking the F2 button after booting up to enter the Mingchi BIOS interface and then enabling AHCI modeThe specific setup steps are as follows:

1. Press the power button and click the F2 button on the keyboard to enter the following BIOS interface:

2. In the BIOS interface, select Advanced Pants by pressing the right button on the keyboard

3. Find SATA Configration in the Advanced option and press Enter

4. Select AHCI mode in SATA Mode Seletion.

After the modification is complete, click F9 - Enter - F10 - Enter to save and exit the settings.

How to set AHCI mode on BIOS hard drive? The steps are simple.

At present, most desktop computers are in IDE mode by default, and to enable the HDD AHCI mode, you need to enter the BIOS to set it on. Most notebooks have adopted AHCI mode by default.

The general steps to enter the BIOS to turn on the hard disk AHCI mode are: restart the computer, press the DEL key to enter the BIOS when starting the computer, select Devices ATA Drives Setup Configure SATA as AHCI, and finally press the F10 key to save and exit the BIOS

Method steps.

1. Restart the computer or turn on the computer, then press the corresponding shortcut key to enter the BIOS setting window when the boot screen appears, use the arrow keys on the keyboard to select the "Config" option in the BIOS setting window, then select "Serial ATA (SATA)", press the Enter key to confirm, 2. After opening Serial ATA (SATA), you will see "SATA Comtroller Mode Option [ compatibility]", press the enter key to select it, 3. A selection window will pop up at this time, switch its mode to "ahci", press the enter key to confirm.

4. After the mode switch, you can see that the parentheses behind the "SATA Comtroller Mode Option" will be changed to "AHCI", 5. The operation will modify the hard disk mode to AHCI mode, and finally press the F10 key to save the settings just now and exit the BIOS settings, at this time, you can install the Win8 system, and the operation of the hard disk mode modification will be introduced here.

How to set AHCI mode on BIOS hard drive? The steps are simple.