Why is only one side of the Japanese style bottom plate glued The reverse side of the Japanese style

There are two reasons why only one side of the Japanese base plate is glued.

1. It is determined by the structure of the daily auction. The appearance of the Japanese table tennis base plate is square, the center of gravity is relatively forward, and it is made of a single piece of cypress, generally 10 mm thick, so that the racket area is large, the thickness is large, the weight is relatively heavy, and the rubber is conducive to reducing the weight of the racket.

2. It is determined by the playing habits of the Japanese. Japanese players generally use the traditional push-and-block and frontal backhand bounces, as well as the mid-to-far platform curve ball, which are all played on one side.

However, there are also Japanese players who use rackets with double-sided glue, and their playing skills are more comprehensive.

1. Performance of Japanese-style table tennis baseplate:

1. The appearance of the Japanese-style table tennis base plate is square, the center of gravity is relatively forward, and it is made of a single piece of cypress, which is generally 10 mm thick, which is conducive to pulling a strong arc ball in the middle and far platform. However, its control is poor, and the technical requirements of the billiard ball are very high.

2. The paddle is generally single-sided because it is too thick, and the backhand technique is monotonous, and it is generally the traditional push-block and frontal backhand bounce.

2. Requirements for Japanese-style table tennis base:

1. The power should be good: because the biggest feature of the Japanese table tennis bottom plate is the arc ball of the COSCO platform, which has very high requirements for power, whether it is a forehand position or a sideways position, there must be the ability to kill the opponent with a board.

2. Flexible footsteps: Since the Japanese-style table tennis bottom plate is generally a one-sided attack, the backhand is generally not pasted with rubber (there are also pasted, Liu Chengmin's backhand is pasted with rubber), so the pace is required to be quite flexible. Table tennis fans with poor pace should be cautious when using Japanese rackets.

3. The technology of the Japanese table tennis base:

1. The compressive pushing technique of the Japanese table tennis baseplate.

When the forehand converts the backhand push, you have to adjust the action of the thumb against the racket, this action is very easy to get used to, the power impact of the backhand of the Japanese racket is greater than the force of the middle straight, but it cannot be played horizontally, but if the oppressive impact of the Japanese straight is practiced well, the threat is great.

2. Easy to control small instantaneous power technology.

Because the grip of the racket is held with the thumb and forefinger to hold the handle of the cork racket, and the rectangular shape of the racket has a large centrifugal force, it is easy to use the wrist to create a small instantaneous acceleration of power, which can be used for changing the serve and handling the ball.

3. The powerful sideways explosion rushed.

When playing against the Japanese racket, be sure to hold down the opponent's backhand, and if you see signs of retreating sideways, you should immediately return the ball to the opponent's forehand position, because the sideways explosion of the Japanese straight is almost a one-hit killing technique.

4. Precautions for Japanese-style table tennis bottom board exercises:

1. Practice the backhand pushing technique after the forehand pulls the ball.

2. Practice the sideways diagonal ball in the backhand position.

3. Practice more serving and attacking skills.

4. Practice the weaknesses of the straight racket and the small ball technique in the table.

Hello! If you only use one side of the rubber to pull the ball, you don't have to spend too much money on the reverse side to buy glue, and most of the long glue is only glued to one side, so it is a waste of points, after all, you only use one side! It is recommended to learn from Korean Yoo Seungmin and other single-sided players, only stick a thin layer of glue on the back, and personally feel that the feeling on the hand will also be affected if the reverse side sticks long glue, it is not recommended, you can also choose to stick a thin layer of sea surface cushion bottom and a thin layer of sea surface, so that it has both a feel, and lightweight, and beautiful, which is your first choice.

Thank you! ~

It is recommended not to use long glue, which is difficult to control. If your technique is very good, use long glue, if it is tender, or use reverse glue, which is easy to control and is also conducive to improvement.

Although long rubber is also difficult for opponents, it is easy to deal with with a slightly experienced golfer, and you are not cheap.

It is recommended to use double-sided tape, on the one hand, to increase the thickness, and feel good. Secondly, different rubbers will have different hitting effects. If you like long glue, it is recommended to use one long and one reverse.

It can be pasted or not. However, the rules of table tennis stipulate that both sides of the racket, whether or not covered, must be matte, and one side must be bright red and the other side black. The edging on the edges of the body should be matte and not white.

Paste a long rubber single rubber, it is better to paste a single sponge, and a sponge on the reverse side not only has the effect of protecting the bottom plate, but also has a microsecond effect on the feel of your play

In the sporting goods store or a simple ** on the sale, it is the bottom plate to protect the sponge, ** expensive to exaggerate 10 yuan, generally 2 yuan.

You can put a piece of pad cotton or a piece of granular monoglue.

For the sake of beauty, you can choose to paste a piece...

Tear off the rubber (pay attention to the wood grain perpendicular to the brand when tearing the glue slowly, and it is easy to draw the wire along the wood grain), and all of them are re-glued.

Approximate steps: Brush special glue on the bottom plate and glue set respectively, and dry it naturally (if you need to fill glue, you can brush it several times on the glue set).

Find a hard transparent plastic paper (such as the film of the liquid crystal display), pad it on the bottom plate, expose a small section of the board surface that has been brushed with glue, take the set of glue and lay it on the bottom plate to align the edges, slowly glue it, pull out a section of the plastic paper, and then stick it well, pay attention to the sticky time, stick it from one end to the other end, and do not leave bubbles. After all the pasting is done, you can press it once or twice with a cylindrical object, and you don't need to use too much force.

You pull the ball means that you are playing arc circles, you should use some very soft bottom plates, and you play single-sided to find the kind of thick and soft bottom plates, thick plates are strong enough to play single-sided, soft is to eat the ball to pull up the arc circle Stica's bottom plate workmanship is the worst, either brushed or cracked, so don't think that imported brands are good Stica's bottom plate performance is super, but the ones suitable for playing single-sided are thick and hard seven clips or carbon plates, and there is no suitable for you Recommended use Shiao De Ziyue, the thickness of this racket, seven layers of pure wood +Two layers of inner reinforcement, the bottom plate is very soft, but there is more strength of the bottom Pu crazy is not bad, but to fill the glue to become a god, if you don't know or don't like to pour, use 729-08 this glue Finally, it is recommended that even if you play single-sided, the backhand position is a piece of glue, because this can enhance the bottom strength of the racket, and at the same time can protect the bottom plate, you can not use it! Tianyi's glue is light and cheap, and the backhand is good.

Rule-wise, yes. According to the regulations, any rubber that complies with the regulations can be glued on both sides, or one side can not be glued. The side used to hit the ball must have rubber.

But even if there is a non-stick side of the skin, it must be colored. Because according to the regulations, both sides of the racket must not be smooth and colorless, one side must be red and the other side black.

In fact, most players don't have adhesive skin on the back. The first is that the handle structure of the Japanese-style straight plate is relatively special, and it is inconvenient to hit the ball on the back. The second is because this kind of racket itself is slightly heavier, and the center is far away, so don't control the ball on the back.

The third reason is that the Japanese-style straight board is generally thicker, the thickest I have ever seen is 12 mm, and the thinnest one is also 8 mm, and the Japanese straight board will be heavier after the back glue, and it will be very tiring after playing for a long time, especially the wrists and fingers will feel particularly tired.

According to the rules, the reverse side of the Japanese straight bottom plate does not need to be glued.

Of course, if you need to paste it, you can also paste it, but the following problems will occur: 1. There is a semicircular boss on the back of the day, which will be made into a rubber and cannot be pasted, which will affect the quality of the shot.

2. Nichichi is generally a 10mm thick plate, and after the rubber is pasted on the reverse side, the shooting is too heavy, which will affect the swing speed.

The reverse side can be glued. However, there is a semicircular boss behind the Japanese-style straight plate, which will cause the rubber to be unable to be filled.

Usually, the reverse side of the Japanese-style straight board is not attached to the rubber, and the whole Taiwan is single-sided. For example: Kim Ze-so, Jiang Penglong, etc.

No. Because the thickness of the Japanese table tennis racket is too thick, it can only be used for frontal strokes, and the world's best Japanese masters use one side.

The glue on the back is estimated to be a snake to add.

The relationship is not very big, it mainly depends on personal habits.

If you weigh it with Focus 3, it doesn't matter. If there is a horizontal hit, it is recommended to change it to Yasaka Zap

Only sticking one side will have an impact on the feeling of the hand.,But as for how much it affects.,It's a matter of your habits.。。。 If you don't use the backhand, you can match it with a sky wing... The words of focus are more important than the wings

Only one side of the ball is thin. If you don't use horizontal punching, just choose a rubber to gain weight. If you practice backhand crossing, focus three is average. Nitaku's rubber is also quite suitable for backhanding, but it is expensive. Just see if you want to use backhand rubber.

Generally with red double happiness G666 (red side), the anti-glue is not commonly used, you can choose the cheaper "Friendship 729" (this is a very classic anti-glue, received a lot of praise back then), such a match is summed up by the predecessors over the years, very popular, the bottom plate with the Galaxy T-2 bottom plate.

Don't buy finished shots. You're a newbie and don't know how bad the finished product is. I guess there is no malice on the first floor, but I just know that the finished product is bad.

One at the same price is hundreds of times stronger than buying a finished product.

The finished product is only 5 or 6 stars for double happiness for two or three hundred yuan, but the performance, I won't say much, I take 40 yuan and I have a racket The performance is much stronger than it.

At this price point, it is recommended that you match it this way.

Base plate: Galaxy Y14

Forehand: Wild Soar 3

Backhand: Galactic Moon.

Directly, because the bottom plate of the galaxy is relatively low-end and has less profits, there is no copycat. You can ask the seller to help you glue it for free, and you can play directly when you send it.

Each has its own characteristics of 5 kinds of rubber Positive rubber Short particle rubber, characterized by good elasticity, fast speed, stable hitting, but not enough strength of the big arm and waist and abdomen, you might as well try the positive rubber racket to win with speed. Anti-glue Anti-glue rubber book.

No, they all use Japanese-style straight boards, and they are all single cypresses, the first two, and the reverse side is only painted according to the rules, and there is no rubber.

Yang Ying is a straight plate with positive glue on the front and reverse glue on the back, like Liu Guoliang, Jiang Penglong and Liu Chengmin are both straight and one-sided anti-glue.

Amateur speaking, it is difficult to practice horizontal playing, but it has a certain effect on making up for the loopholes on the reverse side of the straight board, and you can practice horizontal playing.

After all, the single-sided pull of the straight board requires too much physical strength and pace.

Yang Ying has glue, but Jiang Liu and the others have not.

There are many ways to play on one side of the straight board and paste the glue on the back side. For example, ultra-lightweight rubber sets such as Tianyi and raw rubber are also pasted with single rubber, and there are also special guard sponges, and some Japanese straight backs will be pasted with a small piece of guard cork, and in the early years, there were also painted. Different treatment methods on the reverse side will affect the performance of the whole racket, and it should be handled according to personal playing preferences.

The problem of sweat is unavoidable, and in any case there will be sweat that will wet the wood part, in fact this will not have much effect on the bottom plate. The vast majority of floor damage comes from accidental external forces that are not ping-pong factors, and a large part comes from the gluing process. The effect of sweat will be much less than the impact force of the sphere.

Shande believes that the bottom plate belongs to the category of consumables, and there is no need for transitional maintenance.

Pick up your racket and hit it hard, the moment your racket is soaked with sweat will also be the moment you stand on the World Table Tennis Championships!

Don't stick to the rules, you can design your own beats, and polish them appropriately according to your needs. You can change the light rubber, grind the small racket, and choose a light weight leather for the backhand. Single-sided is not supported, as it will shift the center of gravity of the racket upwards and affect the pumping power.

The regular game stipulates that one side of the red and one side of the black must be used, and the rubber is not pasted, and you can also post a piece of black paper, otherwise the racket shall not be used.

If you don't practice the technique of straight board horizontal play in these years, you will be the same as Zhang Liao who is heads-up - half-disabled.

If the back is not pasted, the center of gravity of the racket is forward, and if you stick rubber on the back in the future, it will not be adaptable.

If the table tennis racket is not a finished racket, it is generally not too heavy, do you tear off the rubber on the finished racket and then paste the rubber?

Only stick one side, if it is a straight shot, and not a straight shot horizontally, you play comfortably, generally it doesn't matter much, horizontal shot, unless you are too afraid of spinning the ball, use a light board on it.

It's just that if you play it normally, it doesn't matter.

Go to a special table tennis shop, buy a board and add two-sided rubber, the cheap one is only about 40, which is better than any one-star and two-star brand.

The bare side will have less power than sticking to both sides, but your racket is heavy and has little impact.

It's okay if you don't stick to the rubber on your backhand, but you can't hit the ball with a backboard in that case, which is a violation.

You can use the long glue on your backhand, sometimes you can't catch the spin ball or play the ball more fiercely, you can turn the racket around, you will have a very magical effect with the long glue, and it is not expensive, just twenty or thirty yuan.

The offensive style of play generally requires that the shot be lighter, and the arc of the ball is large, but the defense will be weak. It is not allowed to stick only one side of rubber in international competitions, it must be red on one side and black on the other, it is recommended that if you want to be light, you can paste thin long rubber on the back side.

The regular game must be black on one side and red on the other.,If the front is red.,Paste a black paper on the back or paint it black.,Straight shot is not straight and horizontal is generally not used on the opposite side.,No impact.,The key is your own comfort.。。。