Lenovo A706 brushed the machine and turned bricks, how to save bricks if you can t turn on the machi

Flashing is risky, please pay attention before brushing! However, for some flashing failures, the phone has become bricked, and it is not completely wooden!

Turn off the phone, and press and hold the volume up button + power button + home button at the same time to enter the recovery mode interface (of course, different models of Android phones, the button to enter recovery may be different, please check how your phone enters recovery first).

If the phone can still enter the recovery interface, then congratulations! Your phone hasn't been bricked completely, **official ROM, re-flash in recover mode.

If your phone can't enter recovery mode or your phone doesn't support TF card, then it can only be repaired by the official line brush tool, which is quite different from different mobile phones on different platforms, it is recommended to consult the official website of "Lightning Bee" or consult the "Lightning Bee" store that is closer to you.

Brush the machine with the line brush method, Lenovo mobile phone line brush machine is very simple, 1Install the flashing tool and driver 2Load the flash file into the tool3

Enter the flashing mode and insert the data cable to start flashing, all according to the tutorial. ,If you won't load the file,It is recommended that you go to the official website of the online brush treasure to see,You can choose different types of function types of flash packages according to your needs, such as root streamlined official,Unlock and so on,**Click to achieve flashing,One-click flashing,Just enter the flashing mode according to the prompts,No need for complex flashing operations。

Dear Lenovo users, hello!

We apologize for the inconvenience caused by the use of your mobile phone.

According to the description, the upgraded system cannot be turned on after restarting, here it is recommended that you try to remove the battery first, and then reboot it to see if it can be turned on and used.

At the same time, it is also recommended that you confirm that the place described to repair the phone is**?

If it is an ordinary mobile phone repair shop, it may be caused by flashing third-party firmware. It is recommended that you take the time to go to your local Lenovo after-sales service center and ask an engineer to help you flash your phone and upgrade it to the latest system firmware version. You can log in to the official website to check the address.

The solution to Lenovo A708T flashing machine into bricks and not being able to boot is as follows:

1. Restart your phone and try it;

2. Try to restore the phone to factory settings;

3. Repair the mobile phone for after-sales warranty processing.

The steps to do a factory reset are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, regardless of whether the phone is the recovery that comes with the system or the recovery of a third party, as long as there is [wipe

data/factory

reset] can be used;

4. Select [WIPE].

data/factory

reset], then press the power button to confirm, and then select yesdelete

alldata];

5. Then select [Reboot] again

system

now], press the power button to confirm and start the phone.