-
2. Turn off your iPhone immediately. Once your iPhone falls into water or gets into it, disconnect it immediately. Because the damage to mobile phones is often not caused by water itself, but by short circuits of internal components triggered by water, or even further cause the components to burn out or the battery**.
3. Remove all parts of the iPhone that can be removed as much as possible, such as the back cover, SD card, SIM card, headphone jack plug, etc., so that the moisture in the iPhone can be fully dissipated as much as possible. The screen protector can be left unpeeled unless you see visible blisters inside.
-
If the iPhone accidentally gets into the water, you should turn off the phone immediately, place the phone screen down horizontally, wipe the phone with a dry towel, dry it with a hair dryer, and then send the phone to the repair center as soon as possible for a professional to repair.
Friends who have a hair dryer around you can simply blow the iPhone with hot air, pay attention to blowing in all directions, and blow the hair for the headphone jack, speaker and other parts. Be careful to keep a certain distance, and remember not to blow a little too much for too long. The iPhone 4 4S with the back cover removed can also be blown, remember to keep a certain distance and blow evenly.
-
Method 1: Use a hair dryer to blow on the air.
When the screen of the Apple iPhone 11 phone fails in water, do not try to turn it on, but let the phone continue to be taken out of the water, and then use a hair dryer to dry it as soon as possible. After the surface is dry, continue to blow along the gap or jack of the mobile phone to ensure that the dry position is completely done.
Method 2: Dry with an electric heater.
If the problem cannot be solved after using a hair dryer, then it is necessary to use an electric heating treasure.
Prepare two dry towels with good water absorption, wrap the phone with a towel, wrap at least three layers, and then use an electric heating treasure to dry, so that all the water hidden in the phone will seep out, and the problem of the mobile phone entering the water screen can be solved.
Method 3: Send it for repair.
Many screen failures are caused by hardware failures, and if the first two methods cannot be solved, they can only be sent to after-sales maintenance.
-
How to deal with the water after the iPhone is ingressive.
1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.
2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.
3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.
4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.
Don't try the following wrong methods after your phone gets into water.
1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.
2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.
3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.
4.Do not leave your phone in water for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.
-
If only it fell into the water! Normal should be fine!
If the phone has been bumped before, the waterproof performance is not good! Then you have to turn it off, put it in something that absorbs moisture, and put it in for a few days before turning it on! For example, inside the rice!
-
Scoop it up and blow it with a hair dryer, but it's useless to blow it, so you can only send it for repair.
-
Go to the phone repair shop and wipe the water dry.
-
1. The water outside the phone can be dried with toilet paper, and then the screen of the phone can be placed horizontally to prevent the water from flowing to the motherboard, and then the water can be dried at medium and low temperatures.
2. Do not start the machine immediately after water ingress. Since the iPhone's built-in battery cannot be removed, the motherboard will be short-circuited when water is in. If the opportunity is opened, the motherboard will be burned out, with irreparable consequences.
3. Wipe with a towel and quickly dry the water on the surface of the phone!
When there is water on the surface of the mobile phone, do not use the water throwing method, which will accelerate the water into the inside of the mobile phone, but use a dry towel or paper towel to quickly absorb moisture, especially in the open holes such as the interface, and try to wash the water dry.
-
Didn't the iPhone 11 say waterproof? What are you afraid of!
-
iphone12 mobile phone into the water, do not turn on immediately, the water into the mobile phone will be short-circuited immediately, should immediately put the mobile phone into the rice tank, wait for half an hour and then take it out, if it still can't be turned on, you can only get after-sales service maintenance.
-
Don't turn on the mobile phone when the water enters, go to the nearby mobile phone store to clean and dry, the water is generally a little more problematic with the display.
-
The phone case should be removed immediately, the screen facing down, and taken to the phone store for repair as soon as possible.
-
I've also been exposed to water on your phone, so don't be in a hurry to turn it on, as it may be easier to burn your phone.
And you don't have to go to the store, because many stores give you advice on changing the screen or something, in fact, this is not needed, and it will cost you a lot of money.
According to what my fathers said, if the phone is not turned on, leave the phone in the sun for a day or two, or bury it in dry rice, so that the water inside can be dried or absorbed.
That's how my phone was saved.,You can try it.,Anyway, if it's useless, you can go to the store again.,But it's just a personal opinion.,You can think about it yourself.。
-
What should I do if I inquire about the water again?
The three most important things to do when your phone gets into water. >>>More
iphone12 mobile phone into the water, do not turn on immediately, the water into the mobile phone will be short-circuited immediately, should immediately put the mobile phone into the rice tank, wait for half an hour and then take it out, if it still can't be turned on, you can only get after-sales service maintenance.
Go to Settings > General >Devices Storage. You might see a list of device storage optimization recommendations, followed by a list of installed apps and how much storage each app uses. Tap the app's name to get more information about your storage. >>>More
Source 1: Signal baseband.
There is a direct relationship between the signal and the signal baseband. Previously, the iPhone was rarely complained about because of the signal, because it used Qualcomm. >>>More
The headphone hole is flooded, you can use it again after it is cool and dry, and if it does not affect it, it will be fine, it may not be used if the earphones are inserted, or there is a problem of loud and loud earphones.