What should I do if my iPhone 12 gets water?

iphone12 mobile phone into the water, do not turn on immediately, the water into the mobile phone will be short-circuited immediately, should immediately put the mobile phone into the rice tank, wait for half an hour and then take it out, if it still can't be turned on, you can only get after-sales service maintenance.

Don't turn on the mobile phone when the water enters, go to the nearby mobile phone store to clean and dry, the water is generally a little more problematic with the display.

The phone case should be removed immediately, the screen facing down, and taken to the phone store for repair as soon as possible.

I've also been exposed to water on your phone, so don't be in a hurry to turn it on, as it may be easier to burn your phone.

And you don't have to go to the store, because many stores give you advice on changing the screen or something, in fact, this is not needed, and it will cost you a lot of money.

According to what my fathers said, if the phone is not turned on, leave the phone in the sun for a day or two, or bury it in dry rice, so that the water inside can be dried or absorbed.

That's how my phone was saved.,You can try it.,Anyway, if it's useless, you can go to the store again.,But it's just a personal opinion.,You can think about it yourself.。

What should I do if I inquire about the water again?

1.When the phone accidentally falls into the water, you should pick it up instantly.

2.The first thing you do when you pick up your phone is not to turn it on or off. Water can conduct electricity, and after the phone falls into the water, the whole phone will become a conductor. Plugging it on or pressing any button can cause a short circuit in your phone.

3.If the mobile phone battery can be removed, remove the battery as soon as possible, and remove the SIM card and memory card successively to avoid further damage to the original and battery.

4.Do not use your hands to shake off the water on your phone, as this will allow the water to enter the inside of the phone, because the exit inside the phone is not in the same direction. To suck the water out as much as possible, you can borrow a vacuum cleaner and dry a rag.

His mobile phone is already waterproof, and it's okay to put it 30 meters underwater, so it doesn't matter if you just drop it.

Q: Can I charge it?

No, it won't.

iPhone 12 is IP68 waterproof, etc., that is, soaking in water within 2 meters for half an hour will not enter the water.

I don't know how you can get IP68 into the water.

If there is really water, shut down the machine as soon as possible to avoid short circuit. Wipe the body and use a hair dryer to dry the data cable port. Place the data port facing down vertically and let it dry, as there is a possibility that water has entered the screen.

In the past, there was some truth in saying that the method of throwing rice bags was a little bit true, but it didn't work for eggs.

Let it sit overnight and try to turn it on again.

If you still can't turn on the machine, go to Apple after-sales maintenance, just say that you can't turn on the machine, don't tell him that it is in the water. Water ingress is not warranted.

Generally, it will be solved for you for free, even if it really gets into the water, then IP68 is false propaganda, and Apple will not make trouble for itself. The same will be solved for you for free.

iphone12 itself should have a waterproof function, if not, you don't turn on the phone after entering the water, take the phone to the desk lamp or other places that are not vigorously baked to let it dissipate moisture, it is best to take it to a special repair shop for professionals to take a look, otherwise the motherboard inside is not good after alkalizing.

1. Do not shake the fuselage when it is turned on. Your iPhone should be powered off as soon as it gets water. Keeping the computer on in the case of water ingress will cause a short circuit in the motherboard.

2. After shutting down, first wipe off the water on the phone case.

3. Don't use a hair dryer to quickly dry the moisture in your phone. The battery of the iPhone is built-in, and the heat fraction of the hair dryer may age the battery and cause the phone to malfunction.

4. Go to the accessory repair shop to disassemble and clean up.

How to deal with the Apple 12 mobile phone after water ingress.

1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.

2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.

3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.

4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.

Don't try the following wrong methods after your phone gets into water.

If there is any water in the mobile phone, immediately open the lid and dry the water inside. Otherwise, send it to a mobile phone repair shop immediately.

It is recommended not to turn on the machine and go directly to the official after-sales service to deal with it, the cost may be a bit ghost, but rest assured, don't believe in what home remedies are put in the rice, there is no use.

The Apple 12 is IP68 waterproof, and if there is not much water intake, it is completely fine, such as when you take it back, there is nothing that can be ignored.

However, if you soak in water for a long time or have dismantled the machine before to destroy the watertightness, it will definitely not work.

If there is a black screen, no boot, restart, and the screen does not move after entering the water, it is likely that there is a problem with the screen or motherboard.

Since water ingress is not covered by the after-sales warranty, it can only be repaired at a cost.

Pay special attention to motherboard maintenance, and don't replace the entire motherboard as soon as you hear that the motherboard is broken.

If the motherboard is broken, don't be afraid, the motherboard is not a whole piece, there are many small chips in it, including baseband, CPU, hard disk, WiFi module, touch screen IC and so on.

Many small local masters don't know how to repair chips, so they let the entire motherboard be replaced, which is very expensive.

In fact, you only need to change the chip, which can save more than half.

The yellow chip in the picture below is the most common power supply IC, and if it is burned, the screen will be black and will not turn on, just change it. The cost is 23 hundred, don't listen to what the small store says, change the motherboard of 23 thousand at every turn.

I have been doing mobile phone chip repair, and I know these very well.

His mobile phone is already waterproof, and it's okay to put it 30 meters underwater, so it doesn't matter if you just drop it.

Q: Can I charge it?

No, it won't.

Dry it with a hair dryer first, and then go to the local after-sales service place to see if it's broken!

It seems that you got the phone that only left the factory next year into the water, how did you cross the past.

What can I do if something that doesn't exist yet gets into the water?

Now the iPhone is fine to rinse with water, and you can take out all the water.

11 hasn't come out yet, just watch out for 12, or let Apple out of the waterproof function will be fine.

Dry it with a hair dryer and put it in a rice bag for a while.

You blow the hair dryer dry first, and then you see which one is not broken.

Anyway, if it gets water, let it soak for a while.

It is best to go to the local after-sales service.

When is the iphone 12 out? Am I lonely?

I'm an Apple maintenance engineer, so let's talk about a few points.

1. Apple X has a partial waterproof function, and daily splashing can be waterproof, 2Apple X really can't be replaced with a new one if it gets water, and it's not covered by the warranty.

3.There are several waterproof test strips in the iPhone, which turn red when exposed to water or water vapor. There is no warranty.

4。Daily use is not only water, water vapor into the inside of the phone will also cause the motherboard to short-circuit and not turn on.

5. If you don't turn it on, you won't turn it on, but the individual chips on the motherboard are short-circuited, and you don't need to replace the entire motherboard, let alone replace the phone. Of course, if you can provide a free warranty, it will be free, otherwise you will go to repair, and you must not listen to the tricks of a small shop without technology, and you must change the motherboard.

6.The chip on the motherboard is generally a few hundred yuan, and it costs 23 thousand to replace the motherboard.

7.If there is not much water intake, you can wipe off the water and enlarge the rice to absorb water, and take it out the next day. It is good individually.

8.If there is a lot of water, even if it is normal for the time being, it is recommended that you disassemble the machine to clean up the water, otherwise there is a dark disease, and the parts inside are all metal structures, and there will definitely be problems if the corrosion rusts to a certain extent.

Let's talk so much first, and then ask if you don't understand.

01 Generally speaking, if your iphone12 is newly bought and has not been used for a long time, then its waterproof ability is generally relatively strong, so he doesn't have to worry too much if he falls into the water, because he has the effect of waterproofing.

02Although the iphone12 has the function of waterproof, you can't soak it in water all the time, so if the iphone12 falls into the water, it still needs to be fished out of the water in time.

03 If it is an iPhone12 that has been used for a relatively long time, then its waterproof ability may be relatively weak, so after it is fished out of the water, if it is said that it is turned off, do not turn it on immediately, and let it stand for a period of time.

04 We can find a small box full of desiccant, if the desiccant is not easy to find, you can also put rice and put the mobile phone in, during this period, you must not turn on the phone, and then go to a special Apple store to find a special Apple repair specialist to take a look at the mobile phone, to avoid blindly turning on the phone, resulting in damage to the mobile phone. Otherwise, the motherboard will be burned out.

If the phone gets into the water, disassemble it immediately and then dry it.

If the water enters after a long time, the circuit board will become moldy, and the wet one will break.

Now in this case, let's go to repair it quickly.

1. Apple 12 has a partial waterproof function, and daily splashing can be waterproof, 2Apple X really can't be replaced with a new one if it gets water, and it's not covered by the warranty.

3.There are several waterproof test strips in the iPhone, which turn red when exposed to water or water vapor. There is no warranty.

Don't be afraid of water ingress into the Apple 12, the Apple 12 is waterproof and will not damage the phone.

What should I do if the Apple 12 phone gets into the water, it can still be used.

1. It is very important to take the mobile phone out of the water as soon as possible, and immediately shut down the power off, whether the screen has turned black or not, please shut down quickly to prevent the motherboard from being short-circuited and burned out, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system is turned off. 2. Take out the SIM card, remove the mobile phone case and other objects, use a paper towel or cloth to remove the water outside the fuselage and in the gaps, and wipe the SIM card as soon as possible after taking it out. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip.

3. Wrap the body with a towel or paper towel with good water absorption to absorb the water. Don't use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results.

4. If it is mild water ingress, you can wrap the fuselage with a paper towel, put it into a small bag of desiccant (often attached to food) while putting it into a bag, or you can put it into a bag full of rice, try to empty the air and seal it. Then put the whole set in a slightly heated place, such as a computer heat. Note:

Do not place in a hot environment, nor blow with a hot air dryer, as doing so will damage the internal components. Wait until there is no fog, preferably more.

Mobile phone water treatment method:

1.Shut down immediately.

If your phone has fallen into the water. Guess the stove needs to immediately salvage the phone, and quickly press the power off button to turn off, if it is a detachable phone, then we can first put the battery, memory card.

Wait to take it out. Powering off your phone first will prevent your phone's battery from being short-circuited**. If the hand disturbs the selling machine and falls vertically, it is best to pick it up vertically.

2.Remove moisture.

After the phone is scooped up, you need to wipe the surface of the phone with a clean towel and other items, and then wipe the earphone jack and other parts with a fine cotton swab. Do not shake your phone dry too hard, as this may allow water from the surface of the phone to seep deeper into the area.

3.Blow dry with a hair dryer.

For the moisture inside the phone, we can use a hair dryer to dry it. Do not use hot air while using the hair dryer.

The hair dryer and the phone need to be kept at a certain distance, and it is best to let the wind blowing from it be close to the normal temperature. Don't tease the hair dryer directly at your phone. Usually a hair dryer blows the phone for about twenty minutes.

There are 3 types of situations:

1. Drop into clean water when the power is on;

2. Fall into non-corrosive liquid in the case of power failure;

3. Drop into non-clean water when energized, or fall into corrosive liquid or viscous liquid or other clean liquid regardless of whether it is energized or not. First of all, for the first and second cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately.

The following I would like to put forward my personal suggestion for various situations, in the case of power-on, it falls into clean water, which generally does not need to be disassembled. Turn off the power as soon as possible and shake it dry, but don't shake off the machine, the idea is to throw the screen out like water in the curtain. If there are water droplets left on the screen, there will be traces after drying.

Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

After these three steps of processing, the power supply can basically work normally. 3. In the case of power failure, fall into non-corrosive liquid. In this case, it can be assumed that the machine is not damaged.

But maybe the LCD screen will be more ugly. Shake it dry, but don't shake it off. If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

If there is something left on the screen and it is very serious, do not deal with it according to the first point 3, because although the electronic circuit after this treatment can work normally, the opening of the screen cavity state may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself. 4. When the power is on, it falls into non-clean water, or whether it is powered on or not, it falls into corrosive liquid or viscous liquid or other clean liquids.

This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment. Turn off the power as soon as possible, and if it falls into a corrosive liquid (such as seawater), rinse the machine with clean water immediately.

Or immerse the machine in clean water and try to dilute the corrosive liquid inside, and disassemble the machine as soon as possible. But when disassembling the machine, you should take it slowly, clean it with alcohol or professional washing water, or hand over the whole pile of things you dismantled to the maintenance point, and let the maintenance point clean and assemble it for you again.