Can the fiber broadband cat given by Telecom be used directly as a router?

Hello! Hopefully, the following will be helpful to you.

The wireless broadband cat presented by China Telecom with ** cannot be directly opened to use wireless Internet access, and non-professionals should not change the configuration without authorization. It may cause the device to fail to be used normally, and you need to ask a professional to enter the wireless broadband modem configuration interface to set the route mode before it can be used as a wireless router.

It is recommended that you purchase a wireless router to build a Wi-Fi environment. In this way, mobile phones, tablets, laptops and other devices can be connected and used according to the prompts. At present, Anhui Telecom's broadband cat change routing mode has been liberalized. For details, please consult the local number 10000 or broadband installer.

If you still have questions, please keep asking. Have a great day, thank you!

The telecom optical modem can be used as a wifi router after being cracked.

If the optical modem of China Telecom has a wireless routing function, it can be used as a router, and if the optical modem does not have a wireless routing function, then it can be directly used as an external router.

As a relay transmission equipment for the local network, the optical modem is suitable for optical fiber terminal transmission equipment and leased line equipment of base stations. For multi-port optical transceivers, they are generally called "optical transceivers", and single-port optical transceivers are generally suitable for user terminals, and work similarly to the baseband modem used for WAN private line (circuit) networking, and are called "optical modems" and "optical modems".

OK. However, you need to tell the installer to turn on the router function. You can't set it up yourself. It is recommended to install a separate router. The bandwidth and wifi signal are better.

The optical modem cannot be used as wifi, and the optical modem is used to receive the broadband of telecommunications, so it cannot be used as a wifi to send signals.

The telecom optical modem can be used as a wifi router, and we can connect it.

They said that you are a little bad, and the girls who chase you are very sad, but I will never chase me, I want you to keep your charm charmed, and you will be far away and close to the end of your life.

Of course, the fiber modem can be used as a router.

In the past, ADSL was a simple network access device, which had to provide travel routing and LAN functions through routers. The fiber optic modem is originally a composite device, which integrates the functions of the cat and the router at the same time.

If you look at the interface of the cat, you can know that the fiber optic modem generally provides four LAN interfaces, and if it does not support routing, it cannot be used at all. At the same time, it also provides wireless network function, and of course, it also needs to support routing.

Telecom broadband modems are not supported when used by routers.

The telecom modem itself does not support automatic dialing, so the routing function cannot be implemented. If you want to use a router, you need to connect to the router to transmit a network signal.

The specific steps are as follows:

3. Next, turn on the wireless wifi, and then check "Enable wireless" in the "WLAN settings" of the modem network, as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, set the name of the wireless wifi, enter the name in the SSID as shown in the figure below, and then proceed to the next step.

5. Finally, click the input box behind the wifi password, enter the desired wifi password, and click "Save Settings" to complete the operation, as shown in the figure below. In this way, the problem is solved.