-
To start the air catch is the layup button + pass button.
The requirement for an empty connection is the accelerator key + layup button. The location should be good. Ask for neutral. Be sure to speed up. Or just pass the ball to you.
-
It's all key combinations, in fact, it's much more interesting than live, which is like a child's toy.
Look at the key settings for yourself.。。。 10 don't understand, 11 has various key combination instructions.
-
The basic keys are: play button + pass button. If you have the ability, it's best to add the arrow keys.
To observe first, to cooperate with the position of the person who is in the air, he must have a tendency to cut in the air, and when he is about to successfully get rid of the defender, press the combination key, which is as long as he has a little dunk ability, he will basically succeed in the air, especially in the fast break, which is the most useful and morale-boosting. The three factors that lead to the unsuccessful air connection are:1
There are defenders jumping up to interfere 2The teammate who is about to dunk has a defender in front of him who can't rush inside 3The dunk player stat is too low or the passer stat is too low.
In short, with a little practice, it is still easy to succeed. But if you used to play nbalive, it will be very uncomfortable to play 2k suddenly, because live's air connection is too easy and fake, and 2k's air connection is relatively real.
That's all, good luck friends
-
2K9 does not have a key that is specifically nullified. In fact, it doesn't have to be fast-breaking, no matter when, as long as someone runs to the basket while you are dribbling, and press the shift and pass buttons at the same time in that direction, it will form an empty catch. But it's hard to get when you're defending, and you can only score goals when you're fast.
-
It is to press and hold the play button and then press the pass to build, for example: I set C to rely on the hit button, S to pass the ball, hold down C when our player (a player with strong bounce and strong dunk ability) plays a fast break, and then press S when the dunk player approaches the basket. Pay attention to try to see the right time before passing, and it is best to have a high chance of receiving the empty receiver when the player "runs" to the basket.
-
It's very simple, press the hit key and the pass button at the same time, I recommend pressing the hit key first, and then press the pass key, pay attention to the play key and don't let go, and don't press the acceleration when there is no time to connect, it's best to stand in place and press again, I hope you adopt.
-
If you don't set the keys, in the keyboard settings, you can play and pass the ball to be empty, and the English is cluth, if you want to be empty.
You need to hold it down.
Ann pass the ball button.
As long as the teammates are in a good position.
It's easy to succeed.
-
lt + a must have an open space or the person who catches the ball has the ability to catch it, and some garbage players will not be able to catch it if they relay.
-
Press APay attention to the blue position.
-
Depends on what version of Sasa you're playing.
-
The empty connection operation method is introduced to rush down the basket, and then press the X button on it, and the air connection badge is introduced. Press the rebound button twice, hit the block button twice, and your teammates will pass the ball, and then accelerate + shoot. Press the rebound button twice as you dunk.
When someone feeds you the ball, you grind a better shot or push the right stick.
NBA2K18 Empty Catch: When a teammate rushes towards the basket, double-click the triangle button Y to pass the ball. Press and hold the shot button + accelerator button to instruct the player to complete the empty catch.
Precautions: Don't blindly pass the empty pass, but pass when your teammates are unguarded and rush to the basket to trigger.
The K20 empty catch method is to press and hold the "space" twice, that is, double click the space, and the ball will immediately pass to his inside teammates to achieve an empty catch. NBA2K20 is a sequel to the NBA2K series.
-
Air Relay: Press and hold the hit button + pass button at the same time. The air relay must grasp the timing of the buttons, and after pulling out the empty space through fast break or tactical running, press the key combination to complete the air relay action at the moment when the empty player runs to the basket and has a certain running distance from the basket and there is no defender in front of him.
Here are a few ways to improve your air relay hit rate:
1) Empty catch during fast break: When playing fast break counterattack, when a player with strong dunk ability has rushed to the three-point shot, just past the three-point line, but there is still a considerable distance from the basket, you can immediately press the hit button + pass button, as long as there is no defender in front, the empty catch will have a considerable success rate.
2) Blocking and dismantling with the singles tactic for empty catch: first open the singles tactic to pull the basket empty, and then block and dismantle, when the center runs to the basket, press the hit button + pass button for the empty catch.
3) Use automatic passing and cutting to cooperate with air catch: At this time, you need to choose a player with strong dunk ability to pass and cut, and at the same time press and hold the hit button + acceleration key + pass button, after the ball is passed, the player who passes the ball will automatically run under the basket, and then press the hit button + pass key to pass the direction to the player who cuts in for empty catch.
4) Control the empty connection after the player without the team running: first press the double match button, and then select the player without the player you want to control (must be a dunk) to run, in order to get rid of the defense, sometimes you can first come out around a player or team handler on the side, and then run inside, when there is still a certain distance from the basket, and there is no opposing defender between them, you can press the play button + pass button for empty connection.
-
The combination button of the air connection is "by playing the key pass button", the timing is very important, generally more for themselves to control the PG under the fast break, their own team's players who have the ability to dunk (such as SF) run in the front, when he just enters the three-point line, this is the best time, the success rate is as high as 90% (provided that there is no defender in front of the PG, otherwise it is easy to be blocked), in addition, it is recommended to release the accelerator button when pressing the air connection combination key. To spend the action, press the accelerator button twice or rely on the hit button.
-
Empty catch: back play pass, timing is very important, think more about your own thoughts: press twice to accelerate or hit back.
The number keys 1, 2, 3, and 4 on the keyboard are all tactical keys. >>>More
Keyboard actions at default settings.
Movement: WSAD means up, down, left and right. >>>More
...Upstairs don't understand, don't talk nonsense, okay.
The words of trading are at General Manager --- Maneger Roster --- Trades >>>More
2K14 Air Connection:
First of all, if you want to connect empty, you must first set the relevant control keys, enter the NBA2K home page, press and hold the upper left button ESC in the upper left corner of the keyboard, and a selection frame will appear. >>>More
Empty connection is a fake pass plus a back button.,Supplement the deduction depends on the character.,The basket may be made up for the board.,But you can press the layup button to make up the deduction.,But the probability of success is small.,I don't know the specific English name.,Your next Chinese patch.。