What is the workflow of a professional cartoonist? Hope to be specific, thanks!

Updated on anime 2024-03-19
9 answers
  1. Anonymous users2024-02-06

    Let's start with the process. The first thing to do is to have a script. Then draw a storyboard.

    That is, the most basic storyboard draft.

    Pay special attention to the inferior bleeding line).

    Then adjust the picture step by step.

    Rub it onto the manuscript paper with a carbon table. It's still very easy to use) If you plan to continue to finish the hand-drawing, you can use a needle pen (Sakura's good) or a dipping pen (I personally recommend a G pen) to outline the line.

    Stickers and the like. I don't have much experience. It's really troublesome and time-consuming.

    Generally, you use a computer to access the outlets. It's more convenient.

    If you plan to do it on the computer. You can scan the storyboard you have drawn into your computer.

    I usually use comicstudio, and opencanvas can also handle outline dots and the like

    Colored and sai. Commonly used.

    The first two are powerful. Good. Don't explain it.

    The SAI file is relatively small, and I think it is suitable for notebooks. But the brushes have to be loaded themselves.

    Hand painting is more fond of markers. Colored pencils. and acrylic.

    Pen tablets (i.e., hand-drawn tablets) are recommended by Wacom.

    The professional ones are the Intuos series. Shadow 3 or Shadow 4 are both more popular right now.

    l Workspace of model A4. There's no need to buy a bigger one. It is not easy to operate in the occupied space.

    Personally, I think that the Shadow 3 L type is enough, and the Shadow 4 is more expensive... This depends on the individual's economic level) and the wancombanboo series is also not bad, relatively small. Good to carry. Cheap.

    It's more suitable for painting in the dormitory in college (the pressure sensitivity and the Intuo series can't be compared.、After all, you get what you pay for)En.、Let's write so much first.

  2. Anonymous users2024-02-05

    In short, draw a good short film to participate in the competition.

    If the short film wins an award, it will increase your visibility and experience.

    You can also show it to the department of manga magazines.

    There will be a responsible editor to be responsible for the comics you draw, he will judge whether the comics you draw are good, if not good, you will leave, if you can still he will give you a business card, and then you will draw a good comic and show it to him, if you draw a very good comic, he will let you draw a good three-word manuscript in the **meeting, and after passing, it will**, after deciding**, he will find an assistant for you, and the assistant will play a lattice and blacken the background for you, and every issue of the magazine will be voted for popularity, and the comics that have been in a long-term slump in popularity will be cut in half, with a new ** Replace.

    In short, it's hard to be a cartoonist, it's hard, it's tiring, there's little free time, and the salary is very small.

    The so-called cartoonist is a person who has relied on comics all his life to eat, and there are very few people who can do this.

    It tells the story of two people who strive to become cartoonists, and you will learn more about a person's journey from fledgling to ** to becoming a well-known cartoonist, which is interspersed with a lot of knowledge about cartoonists, and it is very interesting.

  3. Anonymous users2024-02-04

    The work of a cartoonist is as follows:

    1. Cartoonists generally go out to observe the outside world of handicraft, collect comic materials, and provide more realistic content for comics;

    2. Constantly read new knowledge and enrich the experience of cartoonists;

    3. After having the inspiration to fill the liquid beam, the cartoonist will complete his work in the studio;

    4. Some cartoonists will arrange with a lot of ** story development.

  4. Anonymous users2024-02-03

    The manga artist's job is as follows:

    1. Cartoonists generally go out to observe the outside world, collect comic materials, and provide more realistic content for Shen Shubu comics;

    2. Constantly read new knowledge and enrich the experience of cartoonists;

    3. After having sufficient inspiration, the cartoonist will complete his work in the studio;

    4. Some cartoonists will arrange with a lot of ** story development.

  5. Anonymous users2024-02-02

    If you want to learn systematically, you can consider signing up for a live online class, and recommend CGWANG's online class. The teacher speaks carefully, you can watch it back after the class, and there are also the same type of recorded classes that you can learn for free (give away lifelong VIP).

    zdhhr-11y17r-1675562607209894387

  6. Anonymous users2024-02-01

    In fact, as long as you like it, you have the prerequisites to become a cartoonist, after all, interest is a very important thing.

    The second is to draw more and draw more.

    Eye-eyed and high-handed, low-handed, is actually very harmful.

    It's still important to have your hands on it.

    Practice your hands more.

    If you want to be a cartoonist.

    It's a must to have your own things on hand.

    It's not another to be a manga assistant either.

  7. Anonymous users2024-01-31

    At first, I faxed the manga lines to Shueisha. In the case of One Piece, for example, the first step is to send a caption on the draft status. Then the current One Piece in charge of Zun Isaka revised the line explanation draft with a red pen, and communicated with Oda Sensei through ** about what he felt was better to change and his feelings about reading the original manuscript.

    2. Send the basically completed manuscript to Shueisha. The original manuscript sent by the person in charge will be revised according to the points pointed out, and the original text size adjustment period will be entered 14 days before the release of the jump. It takes about 4 hours to adjust the text part.

    By the way, the original is a little larger than the jump version.

    3. Proofreading of the original manuscript. Thirteen days before the release of the jump, the person in charge and the deputy manager proofread and checked the basically completed manuscript. In this case, check whether there is a discrepancy in the number of calls.

    Since then, the work of Shueisha has been completed. The people in charge are starting to prepare for the next JUMP production.

    4. Delivered the manuscript directly to the president of Kyodo Printing (a printing company in Japan, the third largest printing company after Daiinippon Printing and Toppan Printing, and later gave way to Toppanforms). After the text of the original manuscript is adjusted, it is handed over directly to the co-printing president. Then in the bunkyo district (one of the divisions of Tokyo, located north of Chiyoda and Shinjuku), the handwritten lines are replaced with beautiful fonts.

    At this time, the original manuscript made at Shueisha will be scanned into the computer, and the person in charge of scanning the original manuscript will also pay attention to the plot of the manga.

    5. Jump printing in the factory. JUMP prints at the Goka Factory in Ibaraki Prefecture. All jumps are printed only in this factory and are not printed in other factories.

    The factory works 24 hours a day, printing magazines and the like. Then, 7 days before the release, the JUMP was completed.

    6. Deliver JUMP to all parts of Japan. The finished jump will be delivered from the farthest point possible. But in fact, people in the vicinity of Tokyo can get their hands on the jump first.

  8. Anonymous users2024-01-30

    Communication, scripts, storyboards, drafts, blue drafts, line drafts, coloring drafts, post-processing, delivery, reminder fees. There is usually also the important step of "dragging the draft".

  9. Anonymous users2024-01-29

    The most important thing is that you have to be able to draw, and you have to look good.

Related questions
2 answers2024-03-19

1. The transportation services provided by the postal service include: >>>More

5 answers2024-03-19

DCSDCS, the so-called distributed control system, or distributed system in some data, is a new type of computer control system relative to the centralized control system, which is developed and evolved on the basis of the centralized control system. In terms of system functions, DCS and centralized control systems are not very different, but they are completely different in the way system functions are implemented.

4 answers2024-03-19

There are five main stages of project management, which are as follows: >>>More

17 answers2024-03-19

Automobile sheet metal (metal plate) is a kind of automobile repair technology, which refers to the repair of the car body after the collision, that is, all the work except for the anti-corrosion and decoration of the car body. Such as the analysis of automobile body damage, the measurement of automobile body, the shaping of automobile body sheet metal, tensile correction, stress relief welding, and the assembly and adjustment of automobile body accessories. >>>More

7 answers2024-03-19

The specific construction process of a project:

Generally, a project will go through the following steps from top to bottom: project manager, schematic designer, network engineer, on-site supervisor, and construction personnel. >>>More