The wifi light of the Mi Purifier 1 keeps flashing and can t be connected, what s going on

Hello, glad to answer for you :

1) Whether the router connected to the purifier is working normally, whether the password or encryption method has been changed, it is recommended to use WPA WPA2 encryption mode;

2) Reset the wifi module (click the top and back buttons of the purifier for more than 5 seconds at the same time, release the button after hearing the tick tick sound, and the reset is completed), the purifier is in a connectable state at this time, the wifi indicator flashes slowly, open the mobile app and rebind the connection.

I hope it helps!

Mi water purifier, what to do if the No. 1 light flashes and the wifi flashes.

Hello dear, Xiaomi water purifier, No. 1 light flashing, wifi flashing, what to do: 1First of all, when the Mi cavity water purifier is turned on, open the mobile phone and click to enter the main page of the Mi Home app that is opened, and click the "+" icon symbol in the upper right corner to add devices.

3.In the opened Tim Naheng Plus device page, Mi Home will automatically search for Xiaomi water purifiers, if you don't find it, you can also find the corresponding water purifier icon on the product page below, click to open. 4.

After completing the addition, a prompt will pop up to intercept the WLAN connection Wu Min pants, follow the steps to select the wifi you want to connect, enter the password and click Next. 5.After waiting for the connection to be successful, check that the wifi indicator is no longer flashing.

The No. 1 filter element of the Xiaomi water purifier flashes yellow lightReason: The No. 1 filter element is about to expire and the filter element needs to be purchased to replace it. 1. Two ways to replace the filter element: 1. Contact the local Xiaomi after-sales service, and the Xiaomi after-sales service will send a special person to replace it; 2. Xiaomi does not use any professional tools to remove the shell to replace the filter element, and you can buy the No. 1 filter element to replace it.

Summary. 2. The front status indicator of the Mi water purifier flashes different colors to indicate the status: (1) When the blue is solid, it means that the machine is working normally and has been connected to WiFi.

2) Flashing blue, working normally and connecting to wifi, connecting to the network, dropping and reconnecting. (3) Flashing orange, working fine and waiting for wifi to connect. (4) Orange flashes slowly, working normally, the life of a certain filter element is about to reach and needs to be replaced, or the wifi is being upgraded.

5) Orange is always on, the work is abnormal, and the machine reports failure; Or a filter has reached the end of its life and needs to be replaced.

Dear, I'm glad to answer your questions.

The wrong wifi password of the Xiaomi water purifier will cause the orange light to be on all the time. When the connection of the route destroyer is wrong, and encryption* such as WEP or EAP is used, the orange light will also be lit.

1. The Xiaomi water purifier is abnormal, and the status indicator is orange, please troubleshoot and solve it from the following aspects: (1) Please confirm whether the wifi password entered when connecting to Zhenyin is correct. (2) Whether the external network connection of the router is normal.

3) The router is based on encryption such as WEP or EAP*, please change it to WPA WPA2 to try. (4) Whether the router is set to conceal the SSID of the Brigade, turn off DHCP to manually assign static IP to *surf the Internet, bind MAC* and other router functions, resulting in failure to connect, please turn on or off the relevant functions and try again. (5) If the router is connected to a large number of devices and the network is slow or the router is unresponsive, you can restart the router or reset the router and try.

2. The front status indicator of the Mi water purifier flashes different colors to indicate the status: (1) When the blue is solid, it means that the machine is working normally and has been connected to WiFi. (2) Blue flashing, working normally and training and is noisy to connect to the WIFI, connected to the network, dropped and reconnected.

(3) Flashing orange, working fine and waiting for wifi to connect. (4) Orange flashes slowly, working normally, the life of a certain filter element is about to reach and needs to be replaced, or the wifi is being upgraded. 5) Orange is always on, the work is abnormal, and the machine reports failure; Or a filter has reached the end of its life and needs to be replaced.

Hope it helps, yo <>

1. Enter the Xiaomi wifi official through the browser**.

5. A prompt box pops up to allow the app to make changes to the device, and select: Yes.

6. After the installation is completed, the following interface will appear, click: Start Experience.

7. Pop up in the lower right corner of the interface: Please insert the Mi Portable WiFi prompt box, and plug in the Xiaomi Portable WiFi as instructed, and the system will automatically identify and install the driver of the Xiaomi Portable WiFi, and complete the creation of the hotspot.

8. After the hotspot is created, the interface will display the automatically generated WiFi username and password (if you want to modify it, please click the modify logo behind the WiFi username and password). Next, you can use this wifi username and password to surf the Internet.

Summary. The mobile phone first ** Xiaomi smart home app, the Xiaomi water purifier is plugged in, and then press on the Xiaomi selection icon and reset icon, press for more than 3 seconds, the wifi indicator flashes orange, and you hear the "Dididi" prompt tone, indicating that the wifi reset is successful.

The orange light of the Xiaomi water purifier keeps flashing, how to connect to wifi Hello, I am helping you inquire about the relevant knowledge, and I will reply to you immediately.

The mobile phone first ** Xiaomi smart home app, the Xiaomi water purifier is plugged in, and then press on the Xiaomi selection icon and reset icon, press for more than 3 seconds, the wifi indicator flashes orange, and you hear the "Dididi" prompt tone, indicating that the wifi reset is successful. 2. At this time, you can watch the Xiaomi smart home app on your mobile phone, there is one more device, click in, you will be asked to enter the wifi password, and you can connect it if you enter it.

What to do if the WF light flashes.

Follow this.

I don't want to use WF, can you.

You don't have to link like that.

I won't link.

Well. Is it okay to use WF?

Look at what I sent you.

Topmost. Looked.

You're in order.

Summary. First of all, you have to check if the Mi Water Purifier WIF light has been plugged in, if not, you need to plug it in so that the light is on. Secondly, to check if the Mi Water Purifier WIF light is already properly connected to the router, if not, you need to reconnect it so that the light comes on.

Finally, to check if the Mi Water Purifier WIF light has been set correctly, if not, you need to set it again so that the light comes on. If the above three steps do not solve the problem, it may be that the Xiaomi water purifier WIF light itself is faulty, and at this time, you need to replace the new Xiaomi water purifier WIF light so that the light is on.

First of all, you have to check if the Mi Water Purifier WIF light has been plugged in, if not, you need to plug it in so that the light is on. Secondly, to check if the Mi Water Purifier WIF light is already properly connected to the router, if not, you need to reconnect it so that the light comes on. Finally, to check whether the WIF light of the Mi Net Staring Water Positive Device has been set correctly, if not, you need to set it again so that the light lights up with slag.

If the above three steps do not solve the problem, it may be that the Xiaomi water purifier WIF light itself is faulty, and at this time, you need to replace the new Xiaomi water purifier WIF light so that the light is on.

Can you tell us more about that?

1.Cause: The power interface is not properly connected; Damaged power cord; The internal circuit board of the water purifier is faulty.

2.Solution: Check whether the power interface is connected; Replace the power cord; Take the water purifier to a professional repair point for overhaul.

3.Personal tip: Check the power connector regularly to make sure the connector is in good contact; Regularly inspect the power cord to make sure it is not damaged; Clean the water purifier regularly to ensure that the internal circuit board of the water purifier is working properly.

4.When the wifi light of the water purifier is not lit, it indicates that the wifi connection of the water purifier fails, which may be caused by the power interface is not connected, the power cord is damaged or the internal circuit board of the water purifier is faulty.

It should be broken,The integrated waterway of the Xiaomi water purifier is actually easy to block,I hope it can help you,Midea has just launched a cheaper,MideaM2 water purifier,Take a look,It's much better,I hope it can help you。