0x00000002, wait for the Blue Screen of Death issue 5

1。If this is accidental, usually restart the computer and the symptoms will go away.2 If the antivirus is not thorough, (make a smile with antivirus software, full disk scan and custom scan), if you kill a Trojan or virus, you should restart it immediately, restart the computer, and come to "Quarantine|".Recover", completely removed, trojans and viruses, 3.

Software conflicts, incompatibilities: redundant similar software installation, (360 housekeeper, software uninstall, find uninstall, again: strong cleaning), slower than luck, such as:

** Duplicate or have similar, antivirus, browser, game, input method has the same kind of redundant, uninstall the redundant, leave only one, 4. The computer system has stubborn viruses and Trojan horses or worms interfere with, or the system files have been lost (360 system emergency.

Rescue box or Kingsoft first aid kit, Kingsoft net shield, etc., any of them, full killing, and then: system repair).

6。There are new vulnerabilities waiting to be installed in the system (patched for high-risk and important, others are set to: ignore).

7。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

8。The memory CPU is overheated, and the heat dissipation is not good, (don't boot it up for too long, shut it down for heat dissipation).

9。There is a bad review plugin on the computer, (scans it out and cleans it immediately) or there is too much disk fragmentation, (System Tools), clean up the debris, 10. If it still doesn't work, it means that the system files are missing, or there is a serious error in the system memory.11

Try to press F8 after booting, press Enter, Enter, enter into safe mode, configure correctly for the last time, and press down.

Try it, or, go into safe mode, and after going to the desktop, full antivirus, 12. Playing a game with a blue screen, generally means that the system does not support the game, (change the game version or change the XP system).

Reinstall or upgrade to the latest version).

14。If it still doesn't work, you need to "one-click restore" the system or "reinstall the system".

I don't want to say too much, I was bothered by the blue screen before, and after research1Software that causes BSOD is less likely to be generally software bugs and BSOD viruses (a smaller part)2Hardware causing a blue screen may be 1 too much load 2

Static electricity 3Wet (mostly) methods:1

Open the case, remove the memory module, wipe it with alcohol, and install it -- more practical and effective 2Use a hair dryer to blow a little farther away (with static electricity and heat) (for indoor humidity).

It has nothing to do with the hard drive. It's because the AHCI mode is turned on in the CMOS of your motherboard, and you can just change to a disc with "SATA hard drive" and install it.

Glad to answer for you :

1。If there is a virus in the computer (open Tencent PC Manager, antivirus, scan and kill), if you kill a Trojan horse or virus, you should restart it immediately, and after restarting the computer, go to "Quarantine|".Recover", completely remove trojans and viruses!

6。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

7。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

10。Try to press F8 after booting, go back to the virtual orange car, enter, enter the poor liquid group safety mode, the last correct configuration, press down to try! Or, enter the safe mode, go to the desktop, open Tencent PC Manager, and kill the virus!

11。Playing games on the blue screen, generally the system does not support this game! (Change the game version or change the XP system).

12。**game,**device,**input method,**tool,browser,driver, etc.,The program is unstable! (Use Tencent PC Manager to uninstall and reinstall or upgrade to the latest version)!

I wish the landlord a smooth work and a happy life!!

The blue screen of computer boot is mainly: there is an error in the memory. or caused by abnormal shutdown! Here's how to fix it:

Try to boot the computer, after the computer brand is finished, press F8, safe mode, cursor to select Hui Kaiding: the last correct configuration, enter, enter, press down!

If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.!

If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

1. Symptoms:

When you use an NTFS filesystem volume on an integrated device circuit IDE drive with caching enabled, you may receive the following error message during boot: stop 0x000000ed, unmountable boot volume.

The normal recovery procedure in this case is to run the chkdsk r command from the recovery console. If the OEM version of Windows XP does not already include this fix, you may not be able to go into the recovery console and run the chkdsk r command to recover.

2. Reason: Due to the optimization of the write mode in the IDE disk drive, in order to keep the write speed of the drive at the fastest level possible, the caching routine sometimes disrupts the write order of the data according to its position on the disk. When a write is not completed, a timing window will be opened for the NTFS disk system where the key table may be damaged.

Microsoft used to recommend turning off caching on the IDE driver for programs that contain critical data stored on disk, or for cases where the overall speed of operation is slightly reduced. Programs containing critical data may require a SCSI drive that has better control over data transactions.

3. Solution:

1) OEM WinXP system, can not enter the fault recovery station, you can unplug the hard disk into other PCs to use the principle of master and slave disk, enable the hard disk that can boot normally to boot the operating system, and then enter the CMD command prompt in this way to detect the system disk. After the detection, the problem is basically solved.

2) Or reinstall the system, the problem can also be solved directly.

The blue screen of death, also known as the blue screen of death (BSOD), is a screen image that is forced to be displayed by Microsoft's Windows series operating system to protect computer data files from being destroyed when it cannot recover from a system error.

The Blue Screen of Death prompt on the Windows operating system has become an iconic picture. Most of it is a phenomenon of system crashes.

There are two white-on-blue images in Windows that are both known as the Blue Screen of Death: one is a minor glitch in the Windows 9X operating system, and the other is a kernel error in Windows NT. Since Windows 9X has retired from the stage of history, it is now generally referred to as the latter.

Blue screen, English name BSOD. Technically, the term is defined as "the blue screen that appears when Microsoft Windows crashes or stops running (due to a catastrophic error or internal condition that prevents the system from continuing to function)".

The technical term for what we usually call "system crash" or "kernel error" or "stop error" is "program error checking".

In some beta versions of Windows Vista, the crash turns red, known as the Red Screen of Death (RSOD).

When I started the computer, I suddenly appeared a blue screen that I had never seen before**"stop:0x000000ed"Solution:

1. When the PE interface is opened when you put the installation disk or U disk into the computer CD-ROM drive, press the "R" key on the keyboard to automatically detect and repair the hard disk.

2. At this time, prompt C: At this time, enter "chkdsk -r" to automatically detect and repair.

3. If it is normal, it has been solved.

4. The problem is still caused by the problem of the hard disk or the poor contact of the data cable.

If this happens to your PC once in a while, a basic reboot will fix it. It may be due to the fact that your system is just the kind of "genuine system" with a 10 yuan package activation code, or a conflict between software and software, which may cause a crash or blue screen, and restarting or redoing the system can basically be solved!

Hello, you can turn on the system to select there press f8 to select the last correct configuration that works (you can solve the error caused by the wrong driver installation) and the security mode with network connection (there is a network after entering, and then use 360 software to get it), it may be able to be repaired.

Also, if the memory module gets dust, disassemble the chassis, remove the memory module, clean the memory gold finger, reinstall it, and then start it again.

If it still doesn't work, you can only reinstall or restore the system.

If it helps, please choose the answer you are satisfied with!!

If there is a problem with the disk where the system is located, the system file reading is not normal, so try to reinstall the system in the form of installation after formatting.

0x000000ed there is only one possibility, it is related to the hard disk, it may be that there is a problem with the volume, or it may be that the hard disk is broken.

You find an XP installation disk and go to the console to repair.

In the C drive prompt, enter chkdsk -r and restart after the repair is completed.

If you can do the system normally, that's the volume problem, then it's fine, if it doesn't work, it's the hard disk is broken, replace the hard disk.

Press F8 to move to the advanced option immediately after booting up, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it).

If such a problem arises due to software conflicts, inappropriate drivers, or system problems, you can restore the system in safe mode, or you can't reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

Blue Screen**: 0x000000ed

BSOD Reason: Indicates that the i 0 subsystem failed when trying to mount to the boot volume. It is usually caused by an error in the disk, and sometimes it may be that the hard disk cable is not in good contact, or the cable that meets the transmission specifications of the hard disk is not used (usually the disk is damaged due to sudden power failure and collision).

Solution: 1. Go to the BIOS Setup settings and call the BIOS default settings.

2. At the command line prompt,""chkdsk /f /r""command to check for repair file errors.

3. If the computer does not boot normally, you should try to boot up with "Last Correct Configuration" or "Safe Mode", and then delete or disable the newly added program or driver.

4. Use the disk scanner to detect whether the hard disk is faulty, if so, the faulty part: hard disk.

Most of you have a hard disk failure, and you can't even enter the safe mode because of a hardware failure, not just reinstall the system. It needs to be sent for repair and hard drive testing. The computer is most taboo to suddenly lose power in the boot state, collision, etc., which are easy to cause hardware failure.

It's a broken system, you can reinstall the system and take a look!